gpio: omap: Remove custom PM calls and use cpu_pm instead

For a long time the gpio-omap custom PM calls have been annoying me so
let's replace them with cpu_pm instead. This will enable GPIO PM for
deeper idle states on omap4. And we can handle GPIO PM for omap2/3/4
in the same way.

Note that with this patch we are also slightly changing GPIO PM to be
less aggressive for omap3 and only will idle GPIO when PER context
may be lost.

For omap2, we don't need to save context and don't want to remove any
triggering so let's add a quirk flag for that.

Let's do this all in a single patch to avoid a situation where old
custom calls still are used with new code.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2 files changed, 8 insertions, 13 deletions

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 2a1a4180d5d0..1298b53ac263 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -18,6 +18,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/suspend.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
@@ -29,8 +30,6 @@
 #include <linux/clk-provider.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/fncpy.h>
 
@@ -87,7 +86,7 @@ static int omap2_enter_full_retention(void)
 	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-	omap2_gpio_prepare_for_idle(0);
+	cpu_cluster_pm_enter();
 
 	/* One last check for pending IRQs to avoid extra latency due
 	 * to sleeping unnecessarily. */
@@ -100,7 +99,7 @@ static int omap2_enter_full_retention(void)
 			   OMAP_SDRC_REGADDR(SDRC_POWER));
 
 no_sleep:
-	omap2_gpio_resume_after_idle();
+	cpu_cluster_pm_exit();
 
 	clk_enable(osc_ck);
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 36c55547137c..1a90050361f1 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -18,19 +18,18 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/pm.h>
 #include <linux/suspend.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/omap-dma.h>
 #include <linux/omap-gpmc.h>
-#include <linux/platform_data/gpio-omap.h>
 
 #include <trace/events/power.h>
 
@@ -197,7 +196,6 @@ void omap_sram_idle(void)
 	int mpu_next_state = PWRDM_POWER_ON;
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
-	int per_going_off;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -227,10 +225,8 @@ void omap_sram_idle(void)
 	pwrdm_pre_transition(NULL);
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
-		omap2_gpio_prepare_for_idle(per_going_off);
-	}
+	if (per_next_state == PWRDM_POWER_OFF)
+		cpu_cluster_pm_enter();
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
@@ -295,8 +291,8 @@ void omap_sram_idle(void)
 	pwrdm_post_transition(NULL);
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON)
-		omap2_gpio_resume_after_idle();
+	if (per_next_state == PWRDM_POWER_OFF)
+		cpu_cluster_pm_exit();
 }
 
 static void omap3_pm_idle(void)