Merge tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest chunk of the regulator changes for this release outside of
  the new drivers is the conversion of the fixed regulator to use the
  GPIO descriptor API, there's a small addition to the GPIO API plus a
  bunch of updates to board files to implement it. This is some really
  welcome work from Linus Walleij that's had a bunch of review and has
  been sitting in -next for a while so I'm fairly happy there's no major
  issues.

   - Helpers for overlapping linear ranges.

   - Display opmode and consumer requested load in the regualtor_summary
     file in debugfs, plus a fix there.

   - Support for the fun and entertaining power off mechanism that the
     pfuze100 hardware implements.

   - Conversion of the fixed regulator API to use GPIO descriptors,
     including pulling in a bunch of patches to a bunch of board files.

   - New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
     BD71847, ST PMIC1, and TI LM363x devices"

* tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
  regulator: lochnagar: Use a consisent comment style for SPDX header
  regulator: bd718x7: Remove struct bd718xx_pmic
  regulator: Fetch enable gpiods nonexclusive
  regulator/gpio: Allow nonexclusive GPIO access
  regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
  regulator: stpmic1: Return REGULATOR_MODE_INVALID for invalid mode
  regulator: stpmic1: add stpmic1 regulator driver
  dt-bindings: regulator: document stpmic1 pmic regulators
  regulator: axp20x: Mark expected switch fall-throughs
  regulator: bd718xx: fix build warning on x86_64
  regulator: fixed: Default enable high on DT regulators
  regulator: bd718xx: rename bd71837 to 718xx
  regulator: bd718XX use pickable ranges
  regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
  regulator: Support regulators where voltage ranges are selectable
  mfd: dt bindings: add BD71847 device-tree binding documentation
  regulator: dt bindings: add BD71847 device-tree binding documentation
  regulator/mfd: Support ROHM BD71847 power management IC
  regulator: da905{2,5}: Remove unnecessary array check
  regulator: qcom: Add PMS405 regulators
  ...

1 files changed, 15 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 7f02743edbe4..d0f7a7cc70cb 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -328,7 +329,6 @@ static struct regulator_init_data pandora_vmmc3 = {
 static struct fixed_voltage_config pandora_vwlan = {
 	.supply_name		= "vwlan",
 	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= PANDORA_WIFI_NRESET_GPIO,
 	.startup_delay		= 50000, /* 50ms */
 	.enable_high		= 1,
 	.init_data		= &pandora_vmmc3,
@@ -342,6 +342,19 @@ static struct platform_device pandora_vwlan_device = {
 	},
 };
 
+static struct gpiod_lookup_table pandora_vwlan_gpiod_table = {
+	.dev_id = "reg-fixed-voltage.1",
+	.table = {
+		/*
+		 * As this is a low GPIO number it should be at the first
+		 * GPIO bank.
+		 */
+		GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void pandora_wl1251_init_card(struct mmc_card *card)
 {
 	/*
@@ -403,6 +416,7 @@ fail:
 static void __init omap3_pandora_legacy_init(void)
 {
 	platform_device_register(&pandora_backlight);
+	gpiod_add_lookup_table(&pandora_vwlan_gpiod_table);
 	platform_device_register(&pandora_vwlan_device);
 	omap_hsmmc_init(pandora_mmc3);
 	omap_hsmmc_late_init(pandora_mmc3);