Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...

11 files changed, 13 insertions, 2456 deletions

diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 908bf9a567f1..6ce21a26412e 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,12 +1,9 @@
 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
-
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
deleted file mode 100644
index e3ac52c34019..000000000000
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "regs-clkctrl-mx23.h"
-
-#define CLKCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static int pll_clk_enable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
-
-	/* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
-	 * and is incorrect (excessive). Per definition of the PLLCTRL0
-	 * POWER field, waiting at least 10us.
-	 */
-	udelay(10);
-
-	return 0;
-}
-
-static void pll_clk_disable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
-}
-
-static struct clk pll_clk = {
-	 .get_rate = pll_clk_get_rate,
-	 .enable = pll_clk_enable,
-	 .disable = pll_clk_disable,
-	 .parent = &ref_xtal_clk,
-};
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
-_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
-_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp_clk, SSP)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, PIX)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(audio_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-
-/*
- * clk_set_rate
- */
-static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, bm_busy, div_max, d, f, div, frac;
-	unsigned long diff, parent_rate, calc_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &ref_xtal_clk) {
-		div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
-		div = DIV_ROUND_UP(parent_rate, rate);
-		if (div == 0 || div > div_max)
-			return -EINVAL;
-	} else {
-		div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
-		rate >>= PARENT_RATE_SHIFT;
-		parent_rate >>= PARENT_RATE_SHIFT;
-		diff = parent_rate;
-		div = frac = 1;
-		for (d = 1; d <= div_max; d++) {
-			f = parent_rate * 18 / d / rate;
-			if ((parent_rate * 18 / d) % rate)
-				f++;
-			if (f < 18 || f > 35)
-				continue;
-
-			calc_rate = parent_rate * 18 / f / d;
-			if (calc_rate > rate)
-				continue;
-
-			if (rate - calc_rate < diff) {
-				frac = f;
-				div = d;
-				diff = rate - calc_rate;
-			}
-
-			if (diff == 0)
-				break;
-		}
-
-		if (diff == parent_rate)
-			return -EINVAL;
-
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-		reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
-		reg |= frac;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	}
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-	reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
-	reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-
-	mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy);
-
-	return 0;
-}
-
-#define _CLK_SET_RATE(name, dr)						\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);	\
-	return 0;							\
-}
-
-_CLK_SET_RATE(xbus_clk, XBUS)
-_CLK_SET_RATE(ssp_clk, SSP)
-_CLK_SET_RATE(gpmi_clk, GPMI)
-_CLK_SET_RATE(lcdif_clk, PIX)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(audio_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp_clk, SSP)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(lcdif_clk, PIX)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(audio_clk)
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
-	_REGISTER_CLOCK(NULL, "audio", audio_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
-			&ref_xtal_clk : &ref_io_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_io_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
-			&ref_xtal_clk : &ref_pix_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-	reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-	reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac to get a 288 MHz ref_io.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-
-	return ret;
-}
-
-int __init mx23_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp_clk, &ref_io_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
deleted file mode 100644
index cea29c99e214..000000000000
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-#include <linux/spinlock.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/digctl.h>
-
-#include "regs-clkctrl-mx28.h"
-
-#define CLKCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static struct clk pll2_clk;
-static struct clk cpu_clk;
-static struct clk emi_clk;
-static struct clk saif0_clk;
-static struct clk saif1_clk;
-static struct clk clk32k_clk;
-static DEFINE_SPINLOCK(clkmux_lock);
-
-/*
- * HW_SAIF_CLKMUX_SEL:
- *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
- *		clock pins selected for SAIF1 input clocks.
- *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
- *		SAIF0 clock inputs selected for SAIF1 input clocks.
- *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- */
-int mxs_saif_clkmux_select(unsigned int clkmux)
-{
-	if (clkmux > 0x3)
-		return -EINVAL;
-
-	spin_lock(&clkmux_lock);
-	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
-	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
-	spin_unlock(&clkmux_lock);
-
-	return 0;
-}
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll0_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll1_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll2_clk_get_rate(struct clk *clk)
-{
-	return 50000000;
-}
-
-#define _CLK_ENABLE_PLL(name, r, g)					\
-static int name##_enable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	udelay(10);							\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-									\
-	return 0;							\
-}
-
-_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _CLK_DISABLE_PLL(name, r, g)					\
-static void name##_disable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-}
-
-_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _DEFINE_CLOCK_PLL(name)						\
-	static struct clk name = {					\
-		.get_rate	= name##_get_rate,			\
-		.enable		= name##_enable,			\
-		.disable	= name##_disable,			\
-		.parent		= &ref_xtal_clk,			\
-	}
-
-_DEFINE_CLOCK_PLL(pll0_clk);
-_DEFINE_CLOCK_PLL(pll1_clk);
-_DEFINE_CLOCK_PLL(pll2_clk);
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
-_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
-_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
-_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll0_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
-_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
-_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
-_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long lradc_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 16;
-}
-
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-static unsigned long spdif_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	if (clk == &saif0_clk || clk == &saif1_clk)			\
-		return clk_get_rate(clk->parent) >> 16 * div;		\
-	else								\
-		return clk_get_rate(clk->parent) / div;			\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp0_clk, SSP0)
-_CLK_GET_RATE1(ssp1_clk, SSP1)
-_CLK_GET_RATE1(ssp2_clk, SSP2)
-_CLK_GET_RATE1(ssp3_clk, SSP3)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
-_CLK_GET_RATE1(saif0_clk, SAIF0)
-_CLK_GET_RATE1(saif1_clk, SAIF1)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-_CLK_GET_RATE_STUB(can0_clk)
-_CLK_GET_RATE_STUB(can1_clk)
-_CLK_GET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_rate
- */
-/* fool compiler */
-#define BM_CLKCTRL_CPU_DIV	0
-#define BP_CLKCTRL_CPU_DIV	0
-#define BM_CLKCTRL_CPU_BUSY	0
-
-#define _CLK_SET_RATE(name, dr, fr, fs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, bm_busy, div_max, d, f, div, frac;			\
-	unsigned long diff, parent_rate, calc_rate;			\
-									\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
-									\
-	if (clk->parent == &ref_xtal_clk) {				\
-		parent_rate = clk_get_rate(clk->parent);		\
-		div = DIV_ROUND_UP(parent_rate, rate);			\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
-				BP_CLKCTRL_CPU_DIV_XTAL;		\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;		\
-		}							\
-		if (div == 0 || div > div_max)				\
-			return -EINVAL;					\
-	} else {							\
-		/*							\
-		 * hack alert: this block modifies clk->parent, too,	\
-		 * so the base to use it the grand parent.		\
-		 */							\
-		parent_rate = clk_get_rate(clk->parent->parent);	\
-		rate >>= PARENT_RATE_SHIFT;				\
-		parent_rate >>= PARENT_RATE_SHIFT;			\
-		diff = parent_rate;					\
-		div = frac = 1;						\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_CPU >>		\
-				BP_CLKCTRL_CPU_DIV_CPU;			\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;		\
-		}							\
-		for (d = 1; d <= div_max; d++) {			\
-			f = parent_rate * 18 / d / rate;		\
-			if ((parent_rate * 18 / d) % rate)		\
-				f++;					\
-			if (f < 18 || f > 35)				\
-				continue;				\
-									\
-			calc_rate = parent_rate * 18 / f / d;		\
-			if (calc_rate > rate)				\
-				continue;				\
-									\
-			if (rate - calc_rate < diff) {			\
-				frac = f;				\
-				div = d;				\
-				diff = rate - calc_rate;		\
-			}						\
-									\
-			if (diff == 0)					\
-				break;					\
-		}							\
-									\
-		if (diff == parent_rate)				\
-			return -EINVAL;					\
-									\
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-		reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC;			\
-		reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC;		\
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-	}								\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	if (clk == &cpu_clk) {						\
-		reg &= ~BM_CLKCTRL_CPU_DIV_CPU;				\
-		reg |= div << BP_CLKCTRL_CPU_DIV_CPU;			\
-	} else {							\
-		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
-		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg & (1 << clk->enable_shift)) {			\
-			pr_err("%s: clock is gated\n", __func__);	\
-			return -EINVAL;					\
-		}							\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy);		\
-}
-
-_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
-_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
-_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
-_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
-_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
-_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
-_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
-
-#define _CLK_SET_RATE1(name, dr)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
-}
-
-_CLK_SET_RATE1(xbus_clk, XBUS)
-
-/* saif clock uses 16 bits frac div */
-#define _CLK_SET_RATE_SAIF(name, rs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u16 div;							\
-	u32 reg;							\
-	u64 lrate;							\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	if (rate > parent_rate)						\
-		return -EINVAL;						\
-									\
-	lrate = (u64)rate << 16;					\
-	do_div(lrate, parent_rate);					\
-	div = (u16)lrate;						\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
-	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\
-}
-
-_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
-_CLK_SET_RATE_SAIF(saif1_clk, SAIF1)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(spdif_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-_CLK_SET_RATE_STUB(can0_clk)
-_CLK_SET_RATE_STUB(can1_clk)
-_CLK_SET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp0_clk, SSP0)
-_CLK_SET_PARENT(ssp1_clk, SSP1)
-_CLK_SET_PARENT(ssp2_clk, SSP2)
-_CLK_SET_PARENT(ssp3_clk, SSP3)
-_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(saif0_clk, SAIF0)
-_CLK_SET_PARENT(saif1_clk, SAIF1)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-_CLK_SET_PARENT_STUB(spdif_clk)
-_CLK_SET_PARENT_STUB(fec_clk)
-_CLK_SET_PARENT_STUB(can0_clk)
-_CLK_SET_PARENT_STUB(can1_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk lradc_clk = {
-	.get_rate = lradc_clk_get_rate,
-	.parent = &clk32k_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb0_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll0_clk,
-};
-
-static struct clk usb1_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 16,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll1_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk);
-_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk);
-_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
-	_REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
-	_REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk)
-	_REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
-	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
-	_REGISTER_CLOCK(NULL, "usb1", usb1_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk)
-	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
-	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
-	_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ?
-			&ref_xtal_clk : &ref_io0_clk;
-	ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ?
-			&ref_xtal_clk : &ref_io0_clk;
-	ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ?
-			&ref_xtal_clk : &ref_io1_clk;
-	ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ?
-			&ref_xtal_clk : &ref_io1_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ?
-			&ref_xtal_clk : &ref_pix_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_gpmi_clk;
-	saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ?
-			&ref_xtal_clk : &pll0_clk;
-	saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ?
-			&ref_xtal_clk : &pll0_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-	reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-	reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-	reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-	reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-	reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-
-	/* SAIF has to use frac div for functional operation */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-	reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-	reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * Extra fec clock setting
-	 * The DENX M28 uses an external clock source
-	 * and the clock output must not be enabled
-	 */
-	if (!machine_is_m28evk()) {
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-		reg &= ~BM_CLKCTRL_ENET_SLEEP;
-		reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-	}
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac0 to get a 288 MHz ref_io0.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-	reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-
-	return ret;
-}
-
-int __init mx28_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io0 than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp0_clk, &ref_io0_clk);
-	clk_set_parent(&ssp1_clk, &ref_io0_clk);
-	clk_set_parent(&ssp2_clk, &ref_io1_clk);
-	clk_set_parent(&ssp3_clk, &ref_io1_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clk_set_parent(&lcdif_clk, &ref_pix_clk);
-	clk_set_parent(&saif0_clk, &pll0_clk);
-	clk_set_parent(&saif1_clk, &pll0_clk);
-
-	/*
-	 * Set an initial clock rate for the saif internal logic to work
-	 * properly. This is important when working in EXTMASTER mode that
-	 * uses the other saif's BITCLK&LRCLK but it still needs a basic
-	 * clock which should be fast enough for the internal logic.
-	 */
-	clk_set_rate(&saif0_clk, 24000000);
-	clk_set_rate(&saif1_clk, 24000000);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c
deleted file mode 100644
index 97a6f4acc6cc..000000000000
--- a/arch/arm/mach-mxs/clock.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-	WARN_ON(!clk->usecount);
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		__clk_disable(clk->parent);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->usecount++ == 0) {
-		__clk_enable(clk->parent);
-
-		if (clk->enable)
-			clk->enable(clk);
-	}
-	return 0;
-}
-
-/*
- * The clk_enable/clk_disable could be called by drivers in atomic context,
- * so they should not really hold mutex.  Instead, clk_prepare/clk_unprepare
- * can hold a mutex, as the pair will only be called in non-atomic context.
- * Before migrating to common clk framework, we can have __clk_enable and
- * __clk_disable called in clk_prepare/clk_unprepare with mutex held and
- * leave clk_enable/clk_disable as the dummy functions.
- */
-int clk_prepare(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_prepare);
-
-void clk_unprepare(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unprepare);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	/* nothing to do */
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-	struct clk *old;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
-	    IS_ERR(parent) || clk->set_parent == NULL)
-		return ret;
-
-	if (clk->usecount)
-		clk_prepare_enable(parent);
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_parent(clk, parent);
-	if (ret == 0) {
-		old = clk->parent;
-		clk->parent = parent;
-	} else {
-		old = parent;
-	}
-	mutex_unlock(&clocks_mutex);
-
-	if (clk->usecount)
-		clk_disable(old);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	struct clk *ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h
deleted file mode 100644
index 592c9ab5d760..000000000000
--- a/arch/arm/mach-mxs/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_CLOCK_H__
-#define __MACH_MXS_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-struct module;
-
-struct clk {
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	void __iomem *enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __MACH_MXS_CLOCK_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 8d88399b73ef..84af61cf6a62 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -11,11 +11,9 @@
 #ifndef __MACH_MXS_COMMON_H__
 #define __MACH_MXS_COMMON_H__
 
-struct clk;
-
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(struct clk *, int);
+extern void mxs_timer_init(int);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
@@ -33,6 +31,4 @@ extern void mx28_init_irq(void);
 
 extern void icoll_init_irq(void);
 
-extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask);
-
 #endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index da4610ebe9e6..dafd48e86c8c 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -226,7 +226,7 @@ static void __init mx28evk_fec_reset(void)
 	struct clk *clk;
 
 	/* Enable fec phy clock */
-	clk = clk_get_sys("pll2", NULL);
+	clk = clk_get_sys("enet_out", NULL);
 	if (!IS_ERR(clk))
 		clk_prepare_enable(clk);
 
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
deleted file mode 100644
index 0ea5c9d0e2b2..000000000000
--- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX23_H__
-#define __REGS_CLKCTRL_MX23_H__
-
-
-#define HW_CLKCTRL_PLLCTRL0	(0x00000000)
-#define HW_CLKCTRL_PLLCTRL0_SET	(0x00000004)
-#define HW_CLKCTRL_PLLCTRL0_CLR	(0x00000008)
-#define HW_CLKCTRL_PLLCTRL0_TOG	(0x0000000c)
-
-#define BP_CLKCTRL_PLLCTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLLCTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLLCTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL)
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLLCTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLLCTRL0_POWER	0x00010000
-
-#define HW_CLKCTRL_PLLCTRL1	(0x00000010)
-
-#define BM_CLKCTRL_PLLCTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_CPU	(0x00000020)
-#define HW_CLKCTRL_CPU_SET	(0x00000024)
-#define HW_CLKCTRL_CPU_CLR	(0x00000028)
-#define HW_CLKCTRL_CPU_TOG	(0x0000002c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL	16
-#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
-		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
-		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS	(0x00000030)
-#define HW_CLKCTRL_HBUS_SET	(0x00000034)
-#define HW_CLKCTRL_HBUS_CLR	(0x00000038)
-#define HW_CLKCTRL_HBUS_TOG	(0x0000003c)
-
-#define BM_CLKCTRL_HBUS_BUSY	0x20000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x10000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
-#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE	0x00100000
-#define BP_CLKCTRL_HBUS_SLOW_DIV	16
-#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS	(0x00000040)
-
-#define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_XBUS_DIV	0
-#define BM_CLKCTRL_XBUS_DIV	0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL	(0x00000050)
-#define HW_CLKCTRL_XTAL_SET	(0x00000054)
-#define HW_CLKCTRL_XTAL_CLR	(0x00000058)
-#define HW_CLKCTRL_XTAL_TOG	(0x0000005c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE	30
-#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE	0x40000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
-#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE	0x08000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART	0
-#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
-		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_PIX	(0x00000060)
-
-#define BP_CLKCTRL_PIX_CLKGATE	31
-#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
-#define BM_CLKCTRL_PIX_BUSY	0x20000000
-#define BM_CLKCTRL_PIX_DIV_FRAC_EN	0x00001000
-#define BP_CLKCTRL_PIX_DIV	0
-#define BM_CLKCTRL_PIX_DIV	0x00000FFF
-#define BF_CLKCTRL_PIX_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_PIX_DIV)
-
-#define HW_CLKCTRL_SSP	(0x00000070)
-
-#define BP_CLKCTRL_SSP_CLKGATE	31
-#define BM_CLKCTRL_SSP_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP_BUSY	0x20000000
-#define BM_CLKCTRL_SSP_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP_DIV	0
-#define BM_CLKCTRL_SSP_DIV	0x000001FF
-#define BF_CLKCTRL_SSP_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP_DIV)
-
-#define HW_CLKCTRL_GPMI	(0x00000080)
-
-#define BP_CLKCTRL_GPMI_CLKGATE	31
-#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_GPMI_DIV	0
-#define BM_CLKCTRL_GPMI_DIV	0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF	(0x00000090)
-
-#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_EMI	(0x000000a0)
-
-#define BP_CLKCTRL_EMI_CLKGATE	31
-#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL	8
-#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
-		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
-		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_IR	(0x000000b0)
-
-#define BM_CLKCTRL_IR_CLKGATE	0x80000000
-#define BM_CLKCTRL_IR_AUTO_DIV	0x20000000
-#define BM_CLKCTRL_IR_IR_BUSY	0x10000000
-#define BM_CLKCTRL_IR_IROV_BUSY	0x08000000
-#define BP_CLKCTRL_IR_IROV_DIV	16
-#define BM_CLKCTRL_IR_IROV_DIV	0x01FF0000
-#define BF_CLKCTRL_IR_IROV_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
-#define BP_CLKCTRL_IR_IR_DIV	0
-#define BM_CLKCTRL_IR_IR_DIV	0x000003FF
-#define BF_CLKCTRL_IR_IR_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_IR_IR_DIV)
-
-#define HW_CLKCTRL_SAIF	(0x000000c0)
-
-#define BM_CLKCTRL_SAIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF_DIV	0
-#define BM_CLKCTRL_SAIF_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF_DIV)
-
-#define HW_CLKCTRL_TV	(0x000000d0)
-
-#define BM_CLKCTRL_TV_CLK_TV108M_GATE	0x80000000
-#define BM_CLKCTRL_TV_CLK_TV_GATE	0x40000000
-
-#define HW_CLKCTRL_ETM	(0x000000e0)
-
-#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000040
-#define BP_CLKCTRL_ETM_DIV	0
-#define BM_CLKCTRL_ETM_DIV	0x0000003F
-#define BF_CLKCTRL_ETM_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_FRAC	(0x000000f0)
-#define HW_CLKCTRL_FRAC_SET	(0x000000f4)
-#define HW_CLKCTRL_FRAC_CLR	(0x000000f8)
-#define HW_CLKCTRL_FRAC_TOG	(0x000000fc)
-
-#define BP_CLKCTRL_FRAC_CLKGATEIO	31
-#define BM_CLKCTRL_FRAC_CLKGATEIO	0x80000000
-#define BM_CLKCTRL_FRAC_IO_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC_IOFRAC	24
-#define BM_CLKCTRL_FRAC_IOFRAC	0x3F000000
-#define BF_CLKCTRL_FRAC_IOFRAC(v)  \
-		(((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEPIX	23
-#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
-#define BM_CLKCTRL_FRAC_PIX_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC_PIXFRAC	16
-#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
-#define BF_CLKCTRL_FRAC_PIXFRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEEMI	15
-#define BM_CLKCTRL_FRAC_CLKGATEEMI	0x00008000
-#define BM_CLKCTRL_FRAC_EMI_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC_EMIFRAC	8
-#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC_EMIFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATECPU	7
-#define BM_CLKCTRL_FRAC_CLKGATECPU	0x00000080
-#define BM_CLKCTRL_FRAC_CPU_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC_CPUFRAC	0
-#define BM_CLKCTRL_FRAC_CPUFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC_CPUFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1	(0x00000100)
-#define HW_CLKCTRL_FRAC1_SET	(0x00000104)
-#define HW_CLKCTRL_FRAC1_CLR	(0x00000108)
-#define HW_CLKCTRL_FRAC1_TOG	(0x0000010c)
-
-#define BM_CLKCTRL_FRAC1_CLKGATEVID	0x80000000
-#define BM_CLKCTRL_FRAC1_VID_STABLE	0x40000000
-
-#define HW_CLKCTRL_CLKSEQ	(0x00000110)
-#define HW_CLKCTRL_CLKSEQ_SET	(0x00000114)
-#define HW_CLKCTRL_CLKSEQ_CLR	(0x00000118)
-#define HW_CLKCTRL_CLKSEQ_TOG	(0x0000011c)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP	0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_IR	0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF	0x00000001
-
-#define HW_CLKCTRL_RESET	(0x00000120)
-
-#define BM_CLKCTRL_RESET_CHIP	0x00000002
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-
-#define HW_CLKCTRL_STATUS	(0x00000130)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
-		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION	(0x00000140)
-
-#define BP_CLKCTRL_VERSION_MAJOR	24
-#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
-		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR	16
-#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v)  \
-		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP	0
-#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v)  \
-		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX23_H__ */
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
deleted file mode 100644
index 7d1b061d7943..000000000000
--- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX28_H__
-#define __REGS_CLKCTRL_MX28_H__
-
-#define HW_CLKCTRL_PLL0CTRL0	(0x00000000)
-#define HW_CLKCTRL_PLL0CTRL0_SET	(0x00000004)
-#define HW_CLKCTRL_PLL0CTRL0_CLR	(0x00000008)
-#define HW_CLKCTRL_PLL0CTRL0_TOG	(0x0000000c)
-
-#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL0CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLL0CTRL0_POWER	0x00020000
-
-#define HW_CLKCTRL_PLL0CTRL1	(0x00000010)
-
-#define BM_CLKCTRL_PLL0CTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL1CTRL0	(0x00000020)
-#define HW_CLKCTRL_PLL1CTRL0_SET	(0x00000024)
-#define HW_CLKCTRL_PLL1CTRL0_CLR	(0x00000028)
-#define HW_CLKCTRL_PLL1CTRL0_TOG	(0x0000002c)
-
-#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI	0x80000000
-#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL1CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLL1CTRL0_POWER	0x00020000
-
-#define HW_CLKCTRL_PLL1CTRL1	(0x00000030)
-
-#define BM_CLKCTRL_PLL1CTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL2CTRL0	(0x00000040)
-#define HW_CLKCTRL_PLL2CTRL0_SET	(0x00000044)
-#define HW_CLKCTRL_PLL2CTRL0_CLR	(0x00000048)
-#define HW_CLKCTRL_PLL2CTRL0_TOG	(0x0000004c)
-
-#define BM_CLKCTRL_PLL2CTRL0_CLKGATE	0x80000000
-#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	0x04000000
-#define BP_CLKCTRL_PLL2CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL2CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_POWER	0x00800000
-
-#define HW_CLKCTRL_CPU	(0x00000050)
-#define HW_CLKCTRL_CPU_SET	(0x00000054)
-#define HW_CLKCTRL_CPU_CLR	(0x00000058)
-#define HW_CLKCTRL_CPU_TOG	(0x0000005c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL	16
-#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
-		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
-		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS	(0x00000060)
-#define HW_CLKCTRL_HBUS_SET	(0x00000064)
-#define HW_CLKCTRL_HBUS_CLR	(0x00000068)
-#define HW_CLKCTRL_HBUS_TOG	(0x0000006c)
-
-#define BM_CLKCTRL_HBUS_ASM_BUSY	0x80000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x40000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x20000000
-#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
-#define BM_CLKCTRL_HBUS_ASM_ENABLE	0x00100000
-#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE	0x00080000
-#define BP_CLKCTRL_HBUS_SLOW_DIV	16
-#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS	(0x00000070)
-
-#define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	0x00000800
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_XBUS_DIV	0
-#define BM_CLKCTRL_XBUS_DIV	0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL	(0x00000080)
-#define HW_CLKCTRL_XTAL_SET	(0x00000084)
-#define HW_CLKCTRL_XTAL_CLR	(0x00000088)
-#define HW_CLKCTRL_XTAL_TOG	(0x0000008c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART	0
-#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
-		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_SSP0	(0x00000090)
-
-#define BP_CLKCTRL_SSP0_CLKGATE	31
-#define BM_CLKCTRL_SSP0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP0_BUSY	0x20000000
-#define BM_CLKCTRL_SSP0_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP0_DIV	0
-#define BM_CLKCTRL_SSP0_DIV	0x000001FF
-#define BF_CLKCTRL_SSP0_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP0_DIV)
-
-#define HW_CLKCTRL_SSP1	(0x000000a0)
-
-#define BP_CLKCTRL_SSP1_CLKGATE	31
-#define BM_CLKCTRL_SSP1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP1_BUSY	0x20000000
-#define BM_CLKCTRL_SSP1_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP1_DIV	0
-#define BM_CLKCTRL_SSP1_DIV	0x000001FF
-#define BF_CLKCTRL_SSP1_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP1_DIV)
-
-#define HW_CLKCTRL_SSP2	(0x000000b0)
-
-#define BP_CLKCTRL_SSP2_CLKGATE	31
-#define BM_CLKCTRL_SSP2_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP2_BUSY	0x20000000
-#define BM_CLKCTRL_SSP2_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP2_DIV	0
-#define BM_CLKCTRL_SSP2_DIV	0x000001FF
-#define BF_CLKCTRL_SSP2_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP2_DIV)
-
-#define HW_CLKCTRL_SSP3	(0x000000c0)
-
-#define BP_CLKCTRL_SSP3_CLKGATE	31
-#define BM_CLKCTRL_SSP3_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP3_BUSY	0x20000000
-#define BM_CLKCTRL_SSP3_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP3_DIV	0
-#define BM_CLKCTRL_SSP3_DIV	0x000001FF
-#define BF_CLKCTRL_SSP3_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP3_DIV)
-
-#define HW_CLKCTRL_GPMI	(0x000000d0)
-
-#define BP_CLKCTRL_GPMI_CLKGATE	31
-#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_GPMI_DIV	0
-#define BM_CLKCTRL_GPMI_DIV	0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF	(0x000000e0)
-
-#define BP_CLKCTRL_SPDIF_CLKGATE	31
-#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_EMI	(0x000000f0)
-
-#define BP_CLKCTRL_EMI_CLKGATE	31
-#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL	8
-#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
-		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
-		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_SAIF0	(0x00000100)
-
-#define BP_CLKCTRL_SAIF0_CLKGATE	31
-#define BM_CLKCTRL_SAIF0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF0_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF0_DIV	0
-#define BM_CLKCTRL_SAIF0_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF0_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
-
-#define HW_CLKCTRL_SAIF1	(0x00000110)
-
-#define BP_CLKCTRL_SAIF1_CLKGATE	31
-#define BM_CLKCTRL_SAIF1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF1_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF1_DIV	0
-#define BM_CLKCTRL_SAIF1_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF1_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF1_DIV)
-
-#define HW_CLKCTRL_DIS_LCDIF	(0x00000120)
-
-#define BP_CLKCTRL_DIS_LCDIF_CLKGATE	31
-#define BM_CLKCTRL_DIS_LCDIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_DIS_LCDIF_BUSY	0x20000000
-#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN	0x00002000
-#define BP_CLKCTRL_DIS_LCDIF_DIV	0
-#define BM_CLKCTRL_DIS_LCDIF_DIV	0x00001FFF
-#define BF_CLKCTRL_DIS_LCDIF_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV)
-
-#define HW_CLKCTRL_ETM	(0x00000130)
-
-#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000080
-#define BP_CLKCTRL_ETM_DIV	0
-#define BM_CLKCTRL_ETM_DIV	0x0000007F
-#define BF_CLKCTRL_ETM_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_ENET	(0x00000140)
-
-#define BM_CLKCTRL_ENET_SLEEP	0x80000000
-#define BP_CLKCTRL_ENET_DISABLE	30
-#define BM_CLKCTRL_ENET_DISABLE	0x40000000
-#define BM_CLKCTRL_ENET_STATUS	0x20000000
-#define BM_CLKCTRL_ENET_BUSY_TIME	0x08000000
-#define BP_CLKCTRL_ENET_DIV_TIME	21
-#define BM_CLKCTRL_ENET_DIV_TIME	0x07E00000
-#define BF_CLKCTRL_ENET_DIV_TIME(v)  \
-		(((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME)
-#define BM_CLKCTRL_ENET_BUSY	0x08000000
-#define BP_CLKCTRL_ENET_DIV	21
-#define BM_CLKCTRL_ENET_DIV	0x07E00000
-#define BF_CLKCTRL_ENET_DIV(v)  \
-		(((v) << 21) & BM_CLKCTRL_ENET_DIV)
-#define BP_CLKCTRL_ENET_TIME_SEL	19
-#define BM_CLKCTRL_ENET_TIME_SEL	0x00180000
-#define BF_CLKCTRL_ENET_TIME_SEL(v)  \
-		(((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL)
-#define BV_CLKCTRL_ENET_TIME_SEL__XTAL      0x0
-#define BV_CLKCTRL_ENET_TIME_SEL__PLL       0x1
-#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK  0x2
-#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_ENET_CLK_OUT_EN	0x00040000
-#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP	0x00020000
-#define BM_CLKCTRL_ENET_RESET_BY_SW	0x00010000
-
-#define HW_CLKCTRL_HSADC	(0x00000150)
-
-#define BM_CLKCTRL_HSADC_RESETB	0x40000000
-#define BP_CLKCTRL_HSADC_FREQDIV	28
-#define BM_CLKCTRL_HSADC_FREQDIV	0x30000000
-#define BF_CLKCTRL_HSADC_FREQDIV(v)  \
-		(((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
-
-#define HW_CLKCTRL_FLEXCAN	(0x00000160)
-
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN0	30
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN0	0x40000000
-#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS	0x20000000
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN1	28
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN1	0x10000000
-#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS	0x08000000
-
-#define HW_CLKCTRL_FRAC0	(0x000001b0)
-#define HW_CLKCTRL_FRAC0_SET	(0x000001b4)
-#define HW_CLKCTRL_FRAC0_CLR	(0x000001b8)
-#define HW_CLKCTRL_FRAC0_TOG	(0x000001bc)
-
-#define BP_CLKCTRL_FRAC0_CLKGATEIO0	31
-#define BM_CLKCTRL_FRAC0_CLKGATEIO0	0x80000000
-#define BM_CLKCTRL_FRAC0_IO0_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC0_IO0FRAC	24
-#define BM_CLKCTRL_FRAC0_IO0FRAC	0x3F000000
-#define BF_CLKCTRL_FRAC0_IO0FRAC(v)  \
-		(((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEIO1	23
-#define BM_CLKCTRL_FRAC0_CLKGATEIO1	0x00800000
-#define BM_CLKCTRL_FRAC0_IO1_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC0_IO1FRAC	16
-#define BM_CLKCTRL_FRAC0_IO1FRAC	0x003F0000
-#define BF_CLKCTRL_FRAC0_IO1FRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEEMI	15
-#define BM_CLKCTRL_FRAC0_CLKGATEEMI	0x00008000
-#define BM_CLKCTRL_FRAC0_EMI_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC0_EMIFRAC	8
-#define BM_CLKCTRL_FRAC0_EMIFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC0_EMIFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATECPU	7
-#define BM_CLKCTRL_FRAC0_CLKGATECPU	0x00000080
-#define BM_CLKCTRL_FRAC0_CPU_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC0_CPUFRAC	0
-#define BM_CLKCTRL_FRAC0_CPUFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC0_CPUFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1	(0x000001c0)
-#define HW_CLKCTRL_FRAC1_SET	(0x000001c4)
-#define HW_CLKCTRL_FRAC1_CLR	(0x000001c8)
-#define HW_CLKCTRL_FRAC1_TOG	(0x000001cc)
-
-#define BP_CLKCTRL_FRAC1_CLKGATEGPMI	23
-#define BM_CLKCTRL_FRAC1_CLKGATEGPMI	0x00800000
-#define BM_CLKCTRL_FRAC1_GPMI_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC1_GPMIFRAC	16
-#define BM_CLKCTRL_FRAC1_GPMIFRAC	0x003F0000
-#define BF_CLKCTRL_FRAC1_GPMIFRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEHSADC	15
-#define BM_CLKCTRL_FRAC1_CLKGATEHSADC	0x00008000
-#define BM_CLKCTRL_FRAC1_HSADC_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC1_HSADCFRAC	8
-#define BM_CLKCTRL_FRAC1_HSADCFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC1_HSADCFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEPIX	7
-#define BM_CLKCTRL_FRAC1_CLKGATEPIX	0x00000080
-#define BM_CLKCTRL_FRAC1_PIX_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC1_PIXFRAC	0
-#define BM_CLKCTRL_FRAC1_PIXFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC1_PIXFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC)
-
-#define HW_CLKCTRL_CLKSEQ	(0x000001d0)
-#define HW_CLKCTRL_CLKSEQ_SET	(0x000001d4)
-#define HW_CLKCTRL_CLKSEQ_CLR	(0x000001d8)
-#define HW_CLKCTRL_CLKSEQ_TOG	(0x000001dc)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00040000
-#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF	0x00004000
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD    0x0
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3	0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2	0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1	0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0	0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000004
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1	0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0	0x00000001
-
-#define HW_CLKCTRL_RESET	(0x000001e0)
-
-#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE	0x00000020
-#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	0x00000010
-#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE	0x00000008
-#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT	0x00000004
-#define BM_CLKCTRL_RESET_CHIP	0x00000002
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-
-#define HW_CLKCTRL_STATUS	(0x000001f0)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
-		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION	(0x00000200)
-
-#define BP_CLKCTRL_VERSION_MAJOR	24
-#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
-		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR	16
-#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v)  \
-		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP	0
-#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v)  \
-		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX28_H__ */
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 80ac1fca8a00..30042e23bfa7 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -37,8 +37,6 @@
 #define MXS_MODULE_CLKGATE		(1 << 30)
 #define MXS_MODULE_SFTRST		(1 << 31)
 
-#define CLKCTRL_TIMEOUT		10	/* 10 ms */
-
 static void __iomem *mxs_clkctrl_reset_addr;
 
 /*
@@ -139,17 +137,3 @@ error:
 	return -ETIMEDOUT;
 }
 EXPORT_SYMBOL(mxs_reset_block);
-
-int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT);
-	while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR)
-						+ reg_offset) & mask) {
-		if (time_after(jiffies, timeout)) {
-			pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset);
-			return -ETIMEDOUT;
-		}
-	}
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 564a63279f18..02d36de9c4e8 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -20,6 +20,7 @@
  * MA 02110-1301, USA.
  */
 
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
@@ -243,8 +244,16 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxs_timer_init(struct clk *timer_clk, int irq)
+void __init mxs_timer_init(int irq)
 {
+	struct clk *timer_clk;
+
+	timer_clk = clk_get_sys("timrot", NULL);
+	if (IS_ERR(timer_clk)) {
+		pr_err("%s: failed to get clk\n", __func__);
+		return;
+	}
+
 	clk_prepare_enable(timer_clk);
 
 	/*