ARM: Remove mach-msm and associated ARM architecture code

The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.

[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

1 files changed, 0 insertions, 191 deletions

diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
deleted file mode 100644
index 8f5ecdc4f3ce..000000000000
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-
-#include <mach/clk.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include <mach/vreg.h>
-#include "devices.h"
-#include "gpiomux.h"
-#include "proc_comm.h"
-#include "common.h"
-
-static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
-			tag->u.mem.start = 0;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm7x30_reserve(void)
-{
-	memblock_remove(0x0, SZ_2M);
-}
-
-static int hsusb_phy_init_seq[] = {
-	0x30, 0x32,	/* Enable and set Pre-Emphasis Depth to 20% */
-	0x02, 0x36,	/* Disable CDR Auto Reset feature */
-	-1
-};
-
-static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
-{
-	int ret;
-
-	if (assert) {
-		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
-		if (ret)
-			pr_err("usb hs_clk assert failed\n");
-	} else {
-		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
-		if (ret)
-			pr_err("usb hs_clk deassert failed\n");
-	}
-	return ret;
-}
-
-static int hsusb_phy_clk_reset(struct clk *phy_clk)
-{
-	int ret;
-
-	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
-	if (ret) {
-		pr_err("usb phy clk assert failed\n");
-		return ret;
-	}
-	usleep_range(10000, 12000);
-	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
-	if (ret)
-		pr_err("usb phy clk deassert failed\n");
-	return ret;
-}
-
-static struct msm_otg_platform_data msm_otg_pdata = {
-	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_DR_MODE_PERIPHERAL,
-	.otg_control		= OTG_PHY_CONTROL,
-	.link_clk_reset		= hsusb_link_clk_reset,
-	.phy_clk_reset		= hsusb_phy_clk_reset,
-};
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-	[49] = { /* UART2 RFR */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[50] = { /* UART2 CTS */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[51] = { /* UART2 RX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[52] = { /* UART2 TX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-#endif
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_clock_7x30,
-	&msm_device_gpio_7x30,
-#if defined(CONFIG_SERIAL_MSM)
-        &msm_device_uart2,
-#endif
-	&msm_device_smd,
-	&msm_device_otg,
-	&msm_device_hsusb,
-	&msm_device_hsusb_host,
-};
-
-static void __init msm7x30_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init msm7x30_init(void)
-{
-	msm_device_otg.dev.platform_data = &msm_otg_pdata;
-	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
-	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x30_map_io(void)
-{
-	msm_map_msm7x30_io();
-}
-
-static void __init msm7x30_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.init_late = msm7x30_init_late,
-	.init_time	= msm7x30_timer_init,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.init_late = msm7x30_init_late,
-	.init_time	= msm7x30_timer_init,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.init_late = msm7x30_init_late,
-	.init_time	= msm7x30_timer_init,
-MACHINE_END