[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 100 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
new file mode 100644
index 000000000000..d1336b41f0fb
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000	PCIe Memory space
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f3000000	NAND controller address window
+ *
+ * virt		phys		size
+ * fee00000	f1000000	1M	on-chip peripheral registers
+ * fef00000	f2000000	1M	PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
+						* is the minimal window size
+						*/
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_SIZE		SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   CPU_RESET		0x00000002
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0000
+#define   IRQ_MASK_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define   L2_WRITETHROUGH	0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX		50
+
+
+#endif