Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

1 files changed, 0 insertions, 238 deletions

diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
deleted file mode 100644
index 6a9db0663a80..000000000000
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include "board-mx31moboard.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-static unsigned int devboard_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* SDHC2 */
-	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
-	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
-	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
-	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB H1 */
-	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
-	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int devboard_sdhc2_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC2_WP);
-}
-
-static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC2_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC2_CD);
-
-	ret = gpio_request(SDHC2_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC2_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc2-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC2_WP);
-err_gpio_free:
-	gpio_free(SDHC2_CD);
-
-	return ret;
-}
-
-static void devboard_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC2_CD), data);
-	gpio_free(SDHC2_WP);
-	gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
-	.get_ro	= devboard_sdhc2_get_ro,
-	.init	= devboard_sdhc2_init,
-	.exit	= devboard_sdhc2_exit,
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void devboard_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int devboard_usbh1_hw_init(struct platform_device *pdev)
-{
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int devboard_isp1105_init(struct usb_phy *otg)
-{
-	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
-	if (ret)
-		return ret;
-	/* single ended */
-	gpio_direction_output(USBH1_MODE, 0);
-
-	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
-	if (ret) {
-		gpio_free(USBH1_MODE);
-		return ret;
-	}
-	gpio_direction_output(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-
-static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
-	if (on)
-		gpio_set_value(USBH1_VBUSEN_B, 0);
-	else
-		gpio_set_value(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
-	.init	= devboard_usbh1_hw_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init devboard_usbh1_init(void)
-{
-	struct usb_phy *phy;
-	struct platform_device *pdev;
-
-	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
-	if (!phy)
-		return -ENOMEM;
-
-	phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
-	if (!phy->otg) {
-		kfree(phy);
-		return -ENOMEM;
-	}
-
-	phy->label	= "ISP1105";
-	phy->init	= devboard_isp1105_init;
-	phy->otg->set_vbus	= devboard_isp1105_set_vbus;
-
-	usbh1_pdata.otg = phy;
-
-	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
-	return PTR_ERR_OR_ZERO(pdev);
-}
-
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_devboard_init(void)
-{
-	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
-		"devboard");
-
-	imx31_add_imx_uart1(&uart_pdata);
-
-	imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
-	devboard_init_sel_gpios();
-
-	imx31_add_fsl_usb2_udc(&usb_pdata);
-
-	devboard_usbh1_init();
-}