Merge branch 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup

* 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits)
  ARM: at91: properly sort dtb files in Makefile.boot
  ARM: at91: add at91sam9g25ek.dts in Makefile.boot
  ARM: at91/board-dt: drop default console
  Atmel: move console default platform_device to serial driver
  ARM: at91: merge SRAM Memory banks thanks to mirroring
  ARM: at91: finally drop at91_sys_read/write
  ARM: at91/rtc-at91sam9: pass the GPBR to use via resources
  ARM: at91:rtc/rtc-at91sam9: ioremap register bank
  ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
  ARM: at91/PMC: make register base soc independent
  ARM: at91/PMC: move assignment out of printf
  ARM: at91/pm_slowclock: add runtime detection of memory contoller
  ARM: at91: make sdram/ddr register base soc independent
  ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
  ARM: at91/pm_slowclock: function slow_clock() accepts parameters
  ARM: at91/pm_slowclock: rename register to named define
  ARM: at91/ST: remove not needed casts
  ARM: at91: make ST (System Timer) soc independent
  ARM: at91: make matrix register base soc independent
  ARM: at91/at91x40: remove use of at91_sys_read/write

Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board,
at91/pm_cleanup and at91/base.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 29 insertions, 23 deletions

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1606379ac284..6c9d5e69ac28 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -136,7 +136,7 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = at91_sys_read(AT91_PMC_SCSR);
+	scsr = at91_pmc_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
 	if (cpu_is_at91rm9200()) {
@@ -150,11 +150,6 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91cap9()) {
-		if ((scsr & AT91CAP9_PMC_UHP) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -165,7 +160,7 @@ static int at91_pm_verify_clocks(void)
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
 
-		css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -193,23 +188,36 @@ int at91_suspend_entering_slow_clock(void)
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
 
-static void (*slow_clock)(void);
+static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+			  void __iomem *ramc1, int memctrl);
 
 #ifdef CONFIG_AT91_SLOW_CLOCK
-extern void at91_slow_clock(void);
+extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+			    void __iomem *ramc1, int memctrl);
 extern u32 at91_slow_clock_sz;
 #endif
 
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+	if (id < 0 || id > 1) {
+		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+		BUG();
+	}
+	at91_ramc_base[id] = ioremap(addr, size);
+	if (!at91_ramc_base[id])
+		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
 
 static int at91_pm_enter(suspend_state_t state)
 {
-	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();
 
 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
 			/* remember all the always-wake irqs */
-			(at91_sys_read(AT91_PMC_PCSR)
+			(at91_pmc_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
 					| (at91_extern_irq))
@@ -234,11 +242,18 @@ static int at91_pm_enter(suspend_state_t state)
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
+				int memctrl = AT91_MEMCTRL_SDRAMC;
+
+				if (cpu_is_at91rm9200())
+					memctrl = AT91_MEMCTRL_MC;
+				else if (cpu_is_at91sam9g45())
+					memctrl = AT91_MEMCTRL_DDRSDR;
 #ifdef CONFIG_AT91_SLOW_CLOCK
 				/* copy slow_clock handler to SRAM, and call it */
 				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
 #endif
-				slow_clock();
+				slow_clock(at91_pmc_base, at91_ramc_base[0],
+					   at91_ramc_base[1], memctrl);
 				break;
 			} else {
 				pr_info("AT91: PM - no slow clock mode enabled ...\n");
@@ -259,16 +274,7 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			asm volatile (	"mov r0, #0\n\t"
-					"b 1f\n\t"
-					".align 5\n\t"
-					"1: mcr p15, 0, r0, c7, c10, 4\n\t"
-					: /* no output */
-					: /* no input */
-					: "r0");
-			saved_lpr = sdram_selfrefresh_enable();
-			wait_for_interrupt_enable();
-			sdram_selfrefresh_disable(saved_lpr);
+			at91_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -316,7 +322,7 @@ static int __init at91_pm_init(void)
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
-	at91_sys_write(AT91_SDRAMC_LPR, 0);
+	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
 #endif
 
 	suspend_set_ops(&at91_pm_ops);