diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-04-25 22:11:54 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-04-25 22:11:54 +0300 |
| commit | d53c3eaaef6a05fec04e8b5990d97d7216eb5e42 (patch) | |
| tree | c234bfdc9f8ce8ca90e213fcfd9821005a88f132 /arch/arm/boot | |
| parent | 672d2dae19012cb2c40fdf36711ee3b5f5420724 (diff) | |
| parent | b8a4346d25024e00714fb6ceb0709075827f335d (diff) | |
| download | linux-d53c3eaaef6a05fec04e8b5990d97d7216eb5e42.tar.xz | |
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
Diffstat (limited to 'arch/arm/boot')
249 files changed, 7463 insertions, 4129 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe4152e5846..59829fc90315 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -561,7 +561,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revd1.dtb \ imx6dl-yapp4-draco.dtb \ imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-lynx.dtb \ imx6dl-yapp4-orion.dtb \ + imx6dl-yapp4-phoenix.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ @@ -668,6 +670,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ imx6q-yapp4-crux.dtb \ + imx6q-yapp4-pegasus.dtb \ imx6q-zii-rdu2.dtb \ imx6qp-mba6b.dtb \ imx6qp-nitrogen6_max.dtb \ @@ -683,6 +686,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-yapp4-crux-plus.dtb \ + imx6qp-yapp4-pegasus-plus.dtb \ imx6qp-zii-rdu2.dtb \ imx6s-dhcom-drc02.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -690,6 +694,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-kobo-aura2.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ + imx6sl-tolino-vision.dtb \ imx6sl-tolino-vision5.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ @@ -755,6 +760,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ull-phytec-tauri-emmc.dtb \ imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tarragon-master.dtb \ + imx6ull-tarragon-micro.dtb \ + imx6ull-tarragon-slave.dtb \ + imx6ull-tarragon-slavext.dtb \ imx6ull-tqma6ull2-mba6ulx.dtb \ imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ @@ -994,16 +1003,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb +am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo +am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am57xx-evm.dtb \ + am57xx-evm-reva3.dtb \ am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo \ am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo \ am574x-idk.dtb \ + am57xx-idk-lcd-osd101t2045.dtbo \ + am57xx-idk-lcd-osd101t2587.dtbo \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ @@ -1033,9 +1050,6 @@ dtb-$(CONFIG_ARCH_PXA) += \ pxa300-raumfeld-speaker-m.dtb \ pxa300-raumfeld-speaker-one.dtb \ pxa300-raumfeld-speaker-s.dtb -dtb-$(CONFIG_ARCH_OXNAS) += \ - ox810se-wd-mbwe.dtb \ - ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ @@ -1397,6 +1411,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ + sun8i-t113s-mangopi-mq-r-t113.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb \ @@ -1406,7 +1421,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ - suniv-f1c100s-licheepi-nano.dtb + suniv-f1c100s-licheepi-nano.dtb \ + suniv-f1c200s-lctech-pi.dtb \ + suniv-f1c200s-popstick-v1.1.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ tegra20-asus-tf101.dtb \ diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 947497413977..67c7fcc52ce6 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -29,25 +29,23 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; default-state = "on"; }; user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "gpio"; default-state = "on"; }; }; - user_buttons: user_buttons { + user_buttons: user-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; @@ -70,14 +68,14 @@ }; &am33xx_pinmux { - user_buttons_pins: pinmux_user_buttons { + user_buttons_pins: pinmux-user-buttons { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ @@ -87,7 +85,7 @@ /* CAN */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ @@ -144,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cb_gpio_pins>; - cb_gpio_pins: pinmux_cb_gpio { + cb_gpio_pins: pinmux-cb-gpio { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ @@ -154,7 +152,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -178,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -194,14 +192,14 @@ >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; - uart3_pins: pinmux_uart3 { + uart3_pins: pinmux-uart3 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index e2cec1ffaa4c..034dc5181679 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -14,6 +14,7 @@ aliases { rtc0 = &i2c_rtc; rtc1 = &rtc; + rtc2 = &tps; }; cpus { @@ -48,7 +49,7 @@ /* EMMC */ &am33xx_pinmux { - emmc_pins: pinmux_emmc_pins { + emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -124,7 +125,7 @@ /* I2C Busses */ &am33xx_pinmux { - i2c0_pins: pinmux_i2c0 { + i2c0_pins: pinmux-i2c0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) @@ -164,7 +165,7 @@ /* NAND memory */ &am33xx_pinmux { - nandflash_pins: pinmux_nandflash { + nandflash_pins: pinmux-nandflash { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -202,7 +203,6 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -316,7 +316,7 @@ /* SPI Busses */ &am33xx_pinmux { - spi0_pins: pinmux_spi0 { + spi0_pins: pinmux-spi0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 7b3966ee51b9..3894f14a914c 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -18,7 +18,7 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; @@ -39,7 +39,7 @@ /* User Leds */ &am33xx_pinmux { - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ @@ -49,7 +49,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -65,7 +65,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&user_gpios_pins>; - user_gpios_pins: pinmux_user_gpios { + user_gpios_pins: pinmux-user-gpios { pinctrl-single,pins = < /* DIGIN 1-4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ @@ -126,7 +126,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -155,14 +155,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ @@ -184,7 +184,7 @@ /* RS485 - UART1 */ &am33xx_pinmux { - uart1_rs485_pins: pinmux_uart1_rs485_pins { + uart1_rs485_pins: pinmux-uart1-rs485-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index f957fea8208e..6a103f17585b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -8,8 +8,34 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - sound: sound_iface { - compatible = "ti,da830-evm-audio"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-wega"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_iface_main>; + simple-audio-card,frame-master = <&sound_iface_main>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + sound_iface_main: simple-audio-card,codec { + sound-dai = <&tlv320aic3007>; + clocks = <&mcasp0_fck>; + }; + }; vcc3v3: fixedregulator1 { @@ -23,7 +49,7 @@ /* Audio */ &am33xx_pinmux { - mcasp0_pins: pinmux_mcasp0 { + mcasp0_pins: pinmux-mcasp0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -36,6 +62,7 @@ &i2c0 { tlv320aic3007: tlv320aic3007@18 { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3007"; reg = <0x18>; AVDD-supply = <&vcc3v3>; @@ -47,6 +74,7 @@ }; &mcasp0 { + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcasp0_pins>; op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ @@ -59,23 +87,10 @@ status = "okay"; }; -&sound { - ti,model = "AM335x-Wega"; - ti,audio-codec = <&tlv320aic3007>; - ti,mcasp-controller = <&mcasp0>; - ti,audio-routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; - clocks = <&mcasp0_fck>; - clock-names = "mclk"; - status = "okay"; -}; /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -91,7 +106,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -131,7 +146,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -161,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso new file mode 100644 index 000000000000..c051ee6c1130 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso new file mode 100644 index 000000000000..573e932b1239 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso new file mode 100644 index 000000000000..12385a31061e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-evm.dtso @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DT overlay for AM57xx GP EVM boards + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +&{/} { + compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + model = "TI AM5728 EVM"; + + aliases { + display0 = "/display"; + display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be + // resolved here correcly based on + // information in the base dtb symbol + // table with a fix in dtc + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + label = "USER1"; + linux,code = <BTN_1>; + }; + + button-user2 { + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + label = "USER2"; + linux,code = <BTN_2>; + }; + + button-user3 { + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + label = "USER3"; + linux,code = <BTN_3>; + }; + + button-user4 { + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + label = "USER4"; + linux,code = <BTN_4>; + }; + + button-user5 { + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + label = "USER5"; + linux,code = <BTN_5>; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; + backlight = <&lcd_bl>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + label = "lcd"; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 243 245 247 249 251 252 253 255>; + default-brightness-level = <8>; + pwms = <&ehrpwm1 0 50000 0>; + }; +}; + +&ehrpwm1 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reg = <0x5c>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&dss { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + data-lines = <24>; + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso new file mode 100644 index 000000000000..25d74e9f3c9e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2045-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso new file mode 100644 index 000000000000..8cea7ba32487 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2587-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index be005c9f42ef..2fce8e794265 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -171,8 +171,8 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; + phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 095df5567c93..f4c4b213ef4e 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -148,7 +148,7 @@ port@0 { ethernet = <ð0>; - label = "cpu"; + phy-mode = "rgmii"; reg = <0>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts index c9ac630e5874..1990f7d0cc79 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts @@ -68,8 +68,13 @@ port@10 { reg = <10>; - label = "cpu"; + phy-mode = "2500base-x"; + ethernet = <ð1>; + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts index fa653b379490..b795ad573891 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts @@ -48,8 +48,13 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "2500base-x"; ethernet = <ð1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 85e8d966f6c1..fc8216fd9f60 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -195,7 +195,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "sgmii"; ethernet = <ð2>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 0c1f238e4c30..2d8d319bec83 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -479,7 +479,6 @@ ports@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -491,7 +490,6 @@ ports@6 { reg = <6>; - label = "cpu"; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2bcec5419b66..45cc784659fd 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -62,7 +62,7 @@ }; usb@58000 { - status = "ok"; + status = "okay"; }; ethernet@70000 { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index dbe8dfe236fb..7a0614fd0c93 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,7 +302,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 4b91600eaf62..1e0e88465254 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -251,6 +251,14 @@ pinctrl-0 = <&pinctrl_rgmii1_default>; }; +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &fmc { status = "okay"; flash@0 { @@ -439,6 +447,26 @@ status = "okay"; }; +&i2c8 { + status = "okay"; + + gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + gpio-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + + bmc-ocp0-en-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-high; + line-name = "bmc-ocp0-en-n"; + }; + }; +}; + &i2c9 { status = "okay"; }; @@ -530,13 +558,20 @@ /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", "host0-reboot-ack-n","host0-ready","host0-shd-req-n", "host0-shd-ack-n","s0-overtemp-n", - /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","", "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", "s1-overtemp-n","s1-spi-auth-fail-n", /*Y0-Y7*/ "","","","","","","","host0-special-boot", /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts index 9b4cf5ebe6d5..c4b2efbfdf56 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -63,7 +63,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout.dtsi" }; }; @@ -202,3 +202,7 @@ status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; + +&peci0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts index ff4c07c69af1..4554abf0c7cd 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts @@ -31,7 +31,7 @@ }; system-fault { - gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; panic-indicator; }; }; @@ -51,7 +51,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout-64.dtsi" }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts index 8c05bd56ce1e..7a53f54833a0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts @@ -156,6 +156,7 @@ &i2c8 { status = "okay"; + mctp-controller; temperature-sensor@1f { compatible = "ti,tmp421"; reg = <0x1f>; @@ -165,6 +166,10 @@ compatible = "st,24c32"; reg = <0x50>; }; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; }; &i2c9 { @@ -238,4 +243,52 @@ &gpio0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>; + + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "power-bmc-nic","presence-ocp-debug", + "power-bmc-slot1","power-bmc-slot2", + "power-bmc-slot3","power-bmc-slot4","","", + /*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary", + "reset-cause-nic-secondary","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button", + "slot3-bmc-reset-button","slot4-bmc-reset-button", + "","","","presence-emmc", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","", + "presence-mb-slot1","presence-mb-slot2", + "presence-mb-slot3","presence-mb-slot4", + /*I0-I7*/ "","","","","","","bb-bmc-button","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","", + /*N0-N7*/ "","","","","bmc-ready","","","", + /*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable", + /*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable", + "reset-cause-pcie-slot1","reset-cause-pcie-slot2", + "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","GND", + /*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button", + "bmc-slot3-ac-button","bmc-slot4-ac-button", + "","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","reset-cause-emmc","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","","","","", + /*18C0-18C7*/ "","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","","","","",""; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts index a5be0ee048ec..81902cbe662c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts @@ -552,14 +552,14 @@ &i2c3 { status = "okay"; - power-supply@58 { - compatible = "ibm,cffps"; - reg = <0x58>; + power-supply@5a { + compatible = "acbel,fsg032"; + reg = <0x5a>; }; - power-supply@59 { - compatible = "ibm,cffps"; - reg = <0x59>; + power-supply@5b { + compatible = "acbel,fsg032"; + reg = <0x5b>; }; }; @@ -686,7 +686,7 @@ }; eeprom@50 { - compatible = "atmel,24c64"; + compatible = "atmel,24c128"; reg = <0x50>; }; @@ -884,16 +884,6 @@ use-ncsi; }; -&mac3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii4_default>; - clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, - <&syscon ASPEED_CLK_MAC4RCLK>; - clock-names = "MACCLK", "RCLK"; - use-ncsi; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index c3b0cd61ac85..c6f8f20914d1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -162,6 +162,11 @@ #size-cells = <1>; ranges; + event_log: tcg_event_log@b3d00000 { + no-map; + reg = <0xb3d00000 0x100000>; + }; + ramoops@b3e00000 { compatible = "ramoops"; reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ @@ -1887,6 +1892,7 @@ tpm@2e { compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; reg = <0x2e>; + memory-region = <&event_log>; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 8246a60de0d0..172dd748d807 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -863,6 +863,15 @@ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; status = "disabled"; }; + + udma: dma-controller@1e79e000 { + compatible = "aspeed,ast2600-udma"; + reg = <0x1e79e000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <28>; + #dma-cells = <1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 180e4b1aa2f6..5cd593028aff 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -578,7 +578,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 8aa9e8dea337..95ecb7d040a8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -43,7 +43,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 83bcf9fe0152..4617805c7748 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -220,7 +220,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 1346b8f2b259..999adeca6f33 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -669,7 +669,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index f4b2db9bc4ab..cd25ed2757b7 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index b774a8d63813..93281c47c9ba 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,6 +66,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; /* ARM bus */ @@ -203,6 +209,18 @@ status = "disabled"; }; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi index 7cd55d64de71..ba7f265db121 100644 --- a/arch/arm/boot/dts/bcm63148.dtsi +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -60,6 +60,12 @@ #clock-cells = <0>; clock-frequency = <50000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 043e699cbc27..d8268a1e889b 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -71,6 +71,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -78,6 +79,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +116,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi index 5c72219bc194..49ecc1f0c18c 100644 --- a/arch/arm/boot/dts/bcm6756.dtsi +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index 81513a793815..fbc7d3a5dc5f 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -61,6 +61,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi index 5fa5feac0e29..5e0fe26530f1 100644 --- a/arch/arm/boot/dts/bcm6855.dtsi +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -78,6 +78,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +115,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index 4ec836ac4baf..96529d3d4dc2 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -61,6 +61,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -68,6 +69,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -100,6 +107,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts index 6f083724ab8e..93b8ce22678d 100644 --- a/arch/arm/boot/dts/bcm947622.dts +++ b/arch/arm/boot/dts/bcm947622.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts index d28c4f130ca2..1b405c249213 100644 --- a/arch/arm/boot/dts/bcm963138.dts +++ b/arch/arm/boot/dts/bcm963138.dts @@ -25,3 +25,7 @@ &serial0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 15bec75be74c..b5af61853a07 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -50,3 +50,7 @@ &sata_phy { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts index 98f6a6d09f50..1f5d6d783f09 100644 --- a/arch/arm/boot/dts/bcm963148.dts +++ b/arch/arm/boot/dts/bcm963148.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts index fa096e9cde23..d036e99dd8d1 100644 --- a/arch/arm/boot/dts/bcm963178.dts +++ b/arch/arm/boot/dts/bcm963178.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts index 9a4a87ba9c8a..8b104f3fb14a 100644 --- a/arch/arm/boot/dts/bcm96756.dts +++ b/arch/arm/boot/dts/bcm96756.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts index c70ebccabc19..55852c229608 100644 --- a/arch/arm/boot/dts/bcm96846.dts +++ b/arch/arm/boot/dts/bcm96846.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts index 4438152561ac..2ad880af2104 100644 --- a/arch/arm/boot/dts/bcm96855.dts +++ b/arch/arm/boot/dts/bcm96855.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts index 8fbc175cb452..b7af8ade7a9d 100644 --- a/arch/arm/boot/dts/bcm96878.dts +++ b/arch/arm/boot/dts/bcm96878.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1fdd9a249165..0ca849885d1f 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -415,7 +415,7 @@ &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; - status = "ok"; + status = "okay"; cs3 { #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 85408d4c6f2e..062c86361640 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -422,7 +422,7 @@ clocks = <&gate_clk 3>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@b0000 { diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index a1e22f630638..660cc7fac4db 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -16,6 +16,10 @@ model = "Samsung ARTIK5 evaluation board"; compatible = "samsung,artik5-eval", "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + mmc0 = &mshc_2; + }; }; &mshc_2 { diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 0ac3f284fbb8..3fdd922e635c 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -17,6 +17,11 @@ / { compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + aliases { + mmc0 = &mshc_0; + mmc1 = &mshc_1; + }; + chosen { stdout-path = &serial_2; }; @@ -321,6 +326,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 80d90fe7fad1..2de877d4ccc5 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -22,6 +22,7 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; }; memory@40000000 { @@ -443,6 +444,7 @@ vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f9cba0607e1..88fb3e68ff02 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -23,6 +23,8 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; + mmc1 = &mshc_1; }; chosen { @@ -624,6 +626,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 28bb2ce8ccf7..bd37f1b587f0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -28,9 +28,6 @@ aliases { pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -346,7 +343,7 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos3250-pmu", "syscon"; + compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; @@ -354,12 +351,11 @@ clock-names = "clkout8"; clocks = <&cmu CLK_FIN_PLL>; #clock-cells = <1>; - }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; pd_cam: power-domain@10023c00 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 44dcb1377475..8dd6976ab0a7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -105,12 +105,6 @@ reg = <0x12570000 0x14>; }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023c40 0x20>; @@ -181,11 +175,16 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4210-pmu", "syscon"; + compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; dsi_0: dsi@11c80000 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index bba85011ecc9..37cd4dde53e4 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -25,6 +25,12 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1103e7f92b57..f1927ca15e08 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,6 +30,11 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 181c99eca675..b566f878ed84 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -25,6 +25,10 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index b8e9dd23fc51..ff6ee4b2c31b 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,6 +26,12 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 62bf335d5bed..8fe0d5d2be2d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,6 +24,12 @@ 0x50000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; stdout-path = "serial2:115200n8"; @@ -516,7 +522,7 @@ }; &mct { - compatible = "none"; + status = "disabled"; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index b596e997e451..ded232b04e0d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -20,6 +20,10 @@ model = "TOPEET iTop 4412 Elite board based on Exynos4412"; compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; stdout-path = "serial2:115200n8"; @@ -182,7 +186,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index e42e39dc0e40..7bc6968af9c3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -23,6 +23,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + }; + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203f000 0x1000>; @@ -476,6 +480,7 @@ vmmc-supply = <&buck9_reg>; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 525f945c4b91..e6b949c1a00f 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -25,6 +25,9 @@ aliases { i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; }; chosen { @@ -497,8 +500,7 @@ pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; - - }; +}; &fimc_lite_0 { status = "okay"; @@ -592,7 +594,6 @@ /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; - samsung,camclk-out = <1>; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { @@ -979,6 +980,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 7c2780d3e37c..45ef7b7ba7e0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,11 @@ #include "exynos-mfc-reserved-memory.dtsi" / { + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + }; + chosen { stdout-path = &serial_1; }; @@ -533,6 +538,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ea9fd284386d..23b151645d66 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,6 +25,11 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + mmc1 = &sdhci_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -498,6 +503,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 3e05a49f29ff..0b89d5682f85 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -26,6 +26,12 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; + }; + chosen { stdout-path = &serial_2; }; @@ -188,14 +194,12 @@ pinctrl-names = "default"; interrupt-parent = <&gpx0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - irq-trigger = <0x1>; st,adc-freq = <3>; st,mod-12b = <1>; st,ref-sel = <0>; st,sample-time = <3>; - stmpe_adc { + adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; st,norequest-mask = <0x2f>; @@ -695,6 +699,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a40ff394977c..715dfcba1417 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -22,6 +22,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index e0b6162d2e2a..5a2dcdc5c28b 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -17,6 +17,10 @@ model = "FriendlyARM TINY4412 board based on Exynos4412"; compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc0 = &sdhci_2; + }; + chosen { stdout-path = &serial_0; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 11f9dd94b6b3..82a36fb5ee8b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -28,7 +28,6 @@ pinctrl3 = &pinctrl_3; fimc-lite0 = &fimc_lite_0; fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; }; bus_acp: bus-acp { @@ -798,7 +797,7 @@ }; &pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; + compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon"; clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 2e3da5670bc2..d586189966da 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -192,12 +197,15 @@ vddio-supply = <&vcc_1v8_reg>; vddlvds-supply = <&vcc_3v3_reg>; reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - bridge_out_ep: endpoint { - remote-endpoint = <&panel_ep>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; }; }; }; @@ -586,6 +594,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 831b3494bd46..bb623726ef1e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,6 +17,8 @@ compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5"; aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -350,6 +352,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 3d84b9c6dea3..59b2cc35c37b 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -15,6 +15,9 @@ / { aliases { i2c104 = &i2c_104; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_3; /* WiFi */ }; memory@40000000 { @@ -549,6 +552,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* uSD card */ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 5eca10ecd550..c12bb17631b7 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_1; + }; + chosen { bootargs = "console=tty1"; stdout-path = "serial3:115200n8"; @@ -431,6 +436,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 60a623e3a200..1a4c6c028d03 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -30,10 +30,6 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; - mshc3 = &mmc_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -290,7 +286,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; + compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -298,6 +294,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; watchdog@101d0000 { @@ -810,18 +816,6 @@ status = "disabled"; }; - dp_phy: video-phy-0 { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: video-phy-1 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - dsi_0: dsi@14500000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x14500000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 387b8494f18f..d072a7398866 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -18,6 +18,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -89,6 +94,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 6ddd1dd2fb0b..882fc77c4bc4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -21,6 +21,8 @@ aliases { ethernet = ðernet; + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -513,6 +515,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index b8f953c41c73..bb29b76f6f6a 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -18,6 +18,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -61,6 +66,7 @@ cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 55b7759682a9..809ddda02e53 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -23,6 +23,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial3:115200n8"; }; @@ -778,6 +783,7 @@ status = "okay"; non-removable; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi index 63675fe189cd..f525b2f5e4e0 100644 --- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi +++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi @@ -28,6 +28,11 @@ * for more details. */ + aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -604,6 +609,7 @@ bus-width = <8>; cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9e2123470cad..7a48f2b32819 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -31,6 +31,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* uSD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -722,6 +725,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4d7b6d9008a7..e299344e427a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,6 +21,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { bootargs = "init=/linuxrc"; stdout-path = "serial2:115200n8"; @@ -355,6 +360,7 @@ status = "okay"; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 13d7be236a23..dd291f1199f2 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -19,9 +19,6 @@ compatible = "samsung,exynos5420", "samsung,exynos5"; aliases { - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -696,18 +693,6 @@ status = "disabled"; }; - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,exynos5420-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - dsi: dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; @@ -933,7 +918,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; + compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -941,6 +926,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,exynos5420-mipi-video-phy"; + #phy-cells = <1>; + }; }; tmu_cpu0: tmu@10060000 { diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 30fc677d8bac..2f5b8602e020 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -19,6 +19,10 @@ reg = <0x40000000 0x7ea00000>; }; + aliases { + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e6e7e2ff2a26..b4a851aa8881 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,6 +13,10 @@ #include "exynos5422-odroid-core.dtsi" / { + aliases { + mmc0 = &mmc_0; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +476,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; max-frequency = <200000000>; diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts index df41723d56d4..c35261a338ff 100644 --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts @@ -19,6 +19,10 @@ chassis-type = "handset"; + aliases { + mmc0 = &mmc_0; + }; + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x80000000>; /* 2 GiB */ @@ -597,6 +601,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ebcb66c6319..1f544f12da6c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -29,6 +29,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -703,6 +706,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index ce356c469e1e..d7f5daecc9dc 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -24,42 +24,42 @@ amba-bus { dual_timer0: dual_timer@800000 { - status = "ok"; + status = "okay"; }; uart0: serial@b00000 { /* console */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; - status = "ok"; + status = "okay"; }; uart1: serial@b01000 { /* modem */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; - status = "ok"; + status = "okay"; }; uart2: serial@b02000 { /* audience */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; - status = "ok"; + status = "okay"; }; uart3: serial@b03000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; - status = "ok"; + status = "okay"; }; uart4: serial@b04000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; - status = "ok"; + status = "okay"; }; pmx0: pinmux@803000 { diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index f5691dbc26d2..0210064bf6a5 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -23,7 +23,7 @@ soc { uart0: serial@4007000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 14a92fe59770..98672932e41b 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -14,67 +14,59 @@ device_type = "memory"; reg = <0x40000000 0x08000000>; }; +}; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x300000>; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - partition@300000 { - label = "env"; - reg = <0x300000 0x80000>; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; - partition@380000 { - label = "env2"; - reg = <0x380000 0x80000>; - }; + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; - partition@400000 { - label = "dtb"; - reg = <0x400000 0x80000>; - }; + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; - partition@480000 { - label = "splash"; - reg = <0x480000 0x80000>; - }; + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; - partition@500000 { - label = "kernel"; - reg = <0x500000 0x800000>; - }; + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; - partition@d00000 { - label = "rootfs"; - reg = <0xd00000 0xf300000>; - }; - }; - }; + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - status = "okay"; - }; + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; }; }; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1b253b47006c..4704b6141836 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -10,166 +10,6 @@ model = "Armadeus Systems APF28Dev docking/development board"; compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_apf28dev>; - - hog_pins_apf28dev: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D16__GPIO_1_16 - MX28_PAD_LCD_D17__GPIO_1_17 - MX28_PAD_LCD_D18__GPIO_1_18 - MX28_PAD_LCD_D19__GPIO_1_19 - MX28_PAD_LCD_D20__GPIO_1_20 - MX28_PAD_LCD_D21__GPIO_1_21 - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apf28dev: lcdif-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_apf28dev: otg-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_16bit_pins_a - &lcdif_pins_apf28dev>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can0_vcc>; - status = "okay"; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev - &usb0_id_pins_b>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -223,3 +63,155 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D16__GPIO_1_16 + MX28_PAD_LCD_D17__GPIO_1_17 + MX28_PAD_LCD_D18__GPIO_1_18 + MX28_PAD_LCD_D19__GPIO_1_19 + MX28_PAD_LCD_D20__GPIO_1_20 + MX28_PAD_LCD_D21__GPIO_1_21 + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_apf28dev: otg-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b86be320496b..f9bf40d96568 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -11,200 +11,6 @@ reg = <0x40000000 0x04000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; - bus-width = <4>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_RDY1__GPIO_0_21 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_JTAG_RTCK__GPIO_4_20 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apx4: lcdif-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA4__SSP2_D0 - MX28_PAD_SSP0_DATA5__SSP2_D3 - MX28_PAD_SSP0_DATA6__SSP2_CMD - MX28_PAD_SSP0_DATA7__SSP2_SCK - MX28_PAD_SSP2_SS1__SSP2_D1 - MX28_PAD_SSP2_SS2__SSP2_D2 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__SSP2_SCK - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_apx4>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - vback-porch = <32>; - vfront-porch = <13>; - hsync-len = <48>; - vsync-len = <3>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - pcf8563: rtc@51 { - compatible = "phg,pcf8563"; - reg = <0x51>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_2pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -238,3 +44,189 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 85aa1cc3ff66..d004b1cbb4ae 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -16,107 +16,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - ssd1306_cfa10036: ssd1306-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_cfa10036: leds-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_cfa10036: otg-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDY0__USB0_ID - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x31c3 /* - MX28_PAD_PWM3__GPIO_3_28 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - vmmc-supply = <®_vddio_sd0>; - bus-width = <4>; - status = "okay"; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_b>; - clock-frequency = <400000>; - status = "okay"; - - ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&ssd1306_cfa10036>; - reg = <0x3c>; - reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - solomon,height = <32>; - solomon,width = <128>; - solomon,page-offset = <0>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - }; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_cfa10036>; - dr_mode = "peripheral"; - phy_type = "utmi"; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -138,3 +37,95 @@ gpio = <&gpio3 28 0>; }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; + reg = <0x3c>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + }; +}; + +&pinctrl { + ssd1306_cfa10036: ssd1306-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__USB0_ID + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + dr_mode = "peripheral"; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 9ef0d567ea48..94d6614c1983 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -78,226 +78,6 @@ }; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10049: usb-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - i2cmux_pins_cfa10049: i2cmux-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_pins_cfa10049: mac0-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS2__GPIO_2_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - pca_pins_cfa10049: pca-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_pins_cfa10049: rotary-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_btn_pins_cfa10049: rotary-btn-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF1_SDATA0__GPIO_3_26 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi2_pins_cfa10049: spi2-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi3_pins_cfa10049: spi3-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDN__GPIO_0_24 - MX28_PAD_GPMI_RESETN__GPIO_0_28 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_ALE__GPIO_0_26 - MX28_PAD_GPMI_CLE__GPIO_0_27 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - w1_gpio_pins: w1-gpio@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D21__GPIO_1_21 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10049 - &lcdif_pins_cfa10049 - &lcdif_pins_cfa10049_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -315,18 +95,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a - &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -426,3 +194,225 @@ gpios = <&gpio1 21 0>; }; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10049 + &lcdif_pins_cfa10049 + &lcdif_pins_cfa10049_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10049>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10049: usb-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + i2cmux_pins_cfa10049: i2cmux-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_pins_cfa10049: mac0-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS2__GPIO_2_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + pca_pins_cfa10049: pca-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_pins_cfa10049: rotary-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_btn_pins_cfa10049: rotary-btn-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__GPIO_3_26 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_RESETN__GPIO_0_28 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_ALE__GPIO_0_26 + MX28_PAD_GPMI_CLE__GPIO_0_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D21__GPIO_1_21 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index fac5bbda7a93..42ba7da48beb 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -14,121 +14,6 @@ model = "Crystalfontz CFA-10055 Board"; compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10055: spi2-cfa10055@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055 - &lcdif_pins_cfa10055_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -159,3 +44,112 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10055 + &lcdif_pins_cfa10055 + &lcdif_pins_cfa10055_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&pinctrl { + spi2_pins_cfa10055: spi2-cfa10055@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c5f3337e8b39..0e15bdfd7281 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,81 +13,6 @@ model = "Crystalfontz CFA-10056 Board"; compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10056: spi2-cfa10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_pins_cfa10056: lcdif-10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10056 - &lcdif_pins_cfa10056_pullup >; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <32000000>; - hactive = <480>; - vactive = <800>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <5>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -111,3 +36,74 @@ }; }; }; + +&pinctrl { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 2f7e479dbc74..27602c01f162 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -14,126 +14,6 @@ model = "Crystalfontz CFA-10057 Board"; compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10057: usb-10057@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10057: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10057 - &lcdif_pins_cfa10057>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <12>; - hback-porch = <2>; - vfront-porch = <5>; - vback-porch = <3>; - hsync-len = <2>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -151,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -169,3 +38,124 @@ default-brightness-level = <7>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10057: usb-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 4465fd86785a..931c4d089b26 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -14,93 +14,6 @@ model = "Crystalfontz CFA-10058 Board"; compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10058: usb-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10058: lcdif-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10058>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <13>; - vfront-porch = <29>; - hsync-len = <8>; - vsync-len = <8>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -118,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -136,3 +38,91 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index d451fa018d83..b73020ff1053 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -5,172 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 485"; compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - rs485-red { label = "duckbill:red:rs485"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -182,3 +23,16 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 73f521c46c1e..473d99b9b42f 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -5,184 +5,14 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 EnOcean"; compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_AUART0_CTS__GPIO_3_2 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - enocean_button: enocean-button@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - enocean-blue { label = "duckbill:blue:enocean"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -211,3 +41,29 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; + +&pinctrl { + enocean_button: enocean-button@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 0e8be5975709..859d97a5a775 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -5,9 +5,7 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 SPI"; @@ -16,179 +14,50 @@ aliases { ethernet1 = &qca7000; }; +}; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - qca7000: ethernet@0 { - reg = <0>; - compatible = "qca,qca7000"; - pinctrl-names = "default"; - pinctrl-0 = <&qca7000_pins>; - interrupt-parent = <&gpio3>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - spi-cpha; - spi-cpol; - spi-max-frequency = <8000000>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: led@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - qca7000_pins: qca7000@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ - MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ - MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ - MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ - MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ - MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; +&auart0 { + status = "disabled"; +}; - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; +&i2c0 { + status = "disabled"; +}; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; +&pinctrl { + qca7000_pins: qca7000@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ + MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ + MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ + MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ + MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + /delete-property/ bus-width; + /delete-property/ vmmc-supply; + status = "okay"; + + qca7000: ethernet@0 { + reg = <0>; + compatible = "qca,qca7000"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; + pinctrl-0 = <&qca7000_pins>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <8000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 23fd3036404d..4e28212e9626 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -18,138 +18,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -176,3 +44,127 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index c666afb12445..13ffd533fdea 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -17,108 +17,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - status = "okay"; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -145,3 +43,97 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1053b7c584d8..783abb82b2a8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -95,266 +95,258 @@ }; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg - &gpmi_pins_evk>; - status = "okay"; - }; + sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio2 12 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; - ssp1: spi@80012000 { - compatible = "fsl,imx28-mmc"; - bus-width = <8>; - wp-gpios = <&gpio0 28 0>; - }; + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "sst,sst25vf016b", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; + backlight_display: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP1_CMD__GPIO_2_13 - MX28_PAD_SSP1_DATA3__GPIO_2_15 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - MX28_PAD_SSP1_SCK__GPIO_2_12 - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_AUART2_TX__GPIO_3_9 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pin_gpio3_5: led_gpio3_5@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - gpmi_pins_evk: gpmi-nand-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPMI_CE1N - MX28_PAD_GPMI_RDY1__GPMI_READY1 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_evk: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_evk>; - status = "okay"; - - port { - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; +}; - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; - }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; +}; - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + status = "okay"; - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - at24@51 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x51>; - }; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; +&lradc { + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + status = "okay"; +}; - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; + at24@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + }; +}; - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; - status = "okay"; - }; +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; - usbphy0: usbphy@8007c000 { - status = "okay"; - }; +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pins_a>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - sound { - compatible = "fsl,imx28-evk-sgtl5000", - "fsl,mxs-audio-sgtl5000"; - model = "imx28-evk-sgtl5000"; - saif-controllers = <&saif0 &saif1>; - audio-codec = <&sgtl5000>; + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio3_5>; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; - user { - label = "Heartbeat"; - gpios = <&gpio3 5 0>; - linux,default-trigger = "heartbeat"; - }; - }; +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; - backlight_display: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 2 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp1 { + compatible = "fsl,imx28-mmc"; + bus-width = <8>; + wp-gpios = <&gpio0 28 0>; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + spi-max-frequency = <40000000>; }; }; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 2bdb4c093545..c08b14ad7cd5 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -14,31 +14,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@68 { - compatible = "st,m41t62"; - reg = <0x68>; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -54,3 +29,22 @@ }; }; }; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 865ac3d573c7..6b01de9efd02 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -15,187 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "gpmi-nfc-0-boot"; - reg = <0x00000000 0x01400000>; - read-only; - }; - - partition@1 { - label = "gpmi-nfc-general-use"; - reg = <0x01400000 0x0ec00000>; - }; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_a - &mmc2_cd_cfg - &mmc2_sck_cfg_a>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd1>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - MX28_PAD_PWM4__GPIO_3_29 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_VSYNC__LCD_VSYNC - MX28_PAD_LCD_HSYNC__LCD_HSYNC - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_RESET__LCD_RESET - MX28_PAD_LCD_CS__LCD_ENABLE - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_gpio: leds-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP3_MISO__GPIO_2_26 - MX28_PAD_SSP3_SCK__GPIO_2_24 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - ocotp@8002c000 { - status = "okay"; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <6410256>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hfront-porch = <20>; - vback-porch = <15>; - vfront-porch = <5>; - hsync-len = <30>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - disable-over-current; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -264,3 +83,176 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "gpmi-nfc-0-boot"; + reg = <0x00000000 0x01400000>; + read-only; + }; + + partition@1 { + label = "gpmi-nfc-general-use"; + reg = <0x01400000 0x0ec00000>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <6410256>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hfront-porch = <20>; + vback-porch = <15>; + vfront-porch = <5>; + hsync-len = <30>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&ocotp { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + MX28_PAD_PWM4__GPIO_3_29 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_RESET__LCD_RESET + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_gpio: leds-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SCK__GPIO_2_24 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a + &mmc2_cd_cfg + &mmc2_sck_cfg_a>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd1>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 13acdc7916b9..e350d57a4cec 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -11,220 +11,6 @@ model = "Aries/DENX M28EVK"; compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio3 10 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_AUART2_CTS__GPIO_3_10 - MX28_PAD_AUART2_RTS__GPIO_3_11 - MX28_PAD_AUART3_RX__GPIO_3_12 - MX28_PAD_AUART3_TX__GPIO_3_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_ENABLE__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <0>; - hfront-porch = <256>; - vback-porch = <0>; - vfront-porch = <45>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - status = "okay"; - }; - - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - status = "okay"; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - eeprom: eeprom@51 { - compatible = "atmel,24c128"; - reg = <0x51>; - pagesize = <32>; - }; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_a>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -269,3 +55,209 @@ audio-codec = <&sgtl5000>; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_AUART3_RX__GPIO_3_12 + MX28_PAD_AUART3_TX__GPIO_3_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 90928db0df70..5d74a68c56ff 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -15,111 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog-gpios@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D00__GPIO_0_0 - MX28_PAD_GPMI_D03__GPIO_0_3 - MX28_PAD_GPMI_D06__GPIO_0_6 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256", "mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - eeprom: eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - pagesize = <32>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_b>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -164,3 +59,99 @@ }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 0d58da1c0cc5..ae6ed5c41be3 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -18,50 +18,6 @@ reg = <0x40000000 0x10000000>; /* 256MB */ }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_sck_cfg - &en_sd_pwr>; - broken-cd; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - pinctrl@80018000 { - - en_sd_pwr: en-sd-pwr@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; - }; - reg_vddio_sd0: regulator-vddio-sd0 { compatible = "regulator-fixed"; regulator-name = "vddio-sd0"; @@ -72,3 +28,39 @@ }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&pinctrl { + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 096f246032c6..ffe58c7093e1 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2012 Shawn Guo <shawn.guo@linaro.org> * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e8325fd680d9..e6a4e2770640 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -22,6 +22,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; i2c2-mux { @@ -191,6 +192,13 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -208,10 +216,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index 864dc5018451..33825b5a8f26 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -28,6 +28,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { @@ -64,6 +65,13 @@ status = "okay"; }; +&clks { + clocks = <&rmii_clk>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&rmii_clk>; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -297,11 +305,6 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&rmii_clk>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts index 6b6e6fcdea9c..fa823988312d 100644 --- a/arch/arm/boot/dts/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -21,6 +21,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; backlight: backlight { @@ -109,14 +110,17 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index c52e6caf3996..e98046eea7a4 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -75,6 +75,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_5v0: regulator-5v0 { @@ -99,6 +100,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -116,10 +124,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index 522660c912a0..e3c10483f33b 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -84,6 +84,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -173,6 +174,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -254,10 +262,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index 1f8cddd83ccb..5f4fa796ca18 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -193,6 +193,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_1v8: regulator-1v8 { @@ -293,8 +294,10 @@ }; &clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; }; &ecspi1 { @@ -314,10 +317,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 72df1dba83be..23274be08e61 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -54,6 +54,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; rotary-encoder { @@ -134,6 +135,13 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -182,10 +190,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index aacbf317feea..3be38a3c4bb1 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -98,7 +98,6 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; - status = "okay"; }; }; @@ -106,8 +105,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -131,6 +128,7 @@ switch@10 { compatible = "qca,qca8334"; reg = <10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -270,9 +268,9 @@ compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/ 8 <1>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; led@0 { chan-name = "R"; @@ -303,7 +301,6 @@ compatible = "atmel,24c128"; reg = <0x57>; pagesize = <64>; - status = "okay"; }; touchscreen: touchscreen@5c { @@ -313,7 +310,7 @@ interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <480>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts new file mode 100644 index 000000000000..5c2cd517589b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Lynx i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts new file mode 100644 index 000000000000..e0292f11d03e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Phoenix i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&aliases { + /delete-property/ ethernet1; +}; + +&gpio_keys { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi new file mode 100644 index 000000000000..52a0f6ee426f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + button { + label = "Factory RESET"; + linux,code = <BTN_0>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + backlight = <&backlight>; + enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-supply = <&sw2_reg>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + eth2: port@1 { + reg = <1>; + label = "eth2"; + phy-handle = <&phy_port1>; + }; + + eth1: port@2 { + reg = <2>; + label = "eth1"; + phy-handle = <&phy_port2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: switchphy@11 { + reg = <0x11>; + }; + + phy_port2: switchphy@12 { + reg = <0x12>; + }; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + led@0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; + + rtc: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,col-offset = <4>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchkeys>; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_touchkeys: touchkeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts index 349959d38020..54a57a4548e2 100644 --- a/arch/arm/boot/dts/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -22,6 +22,13 @@ reg = <0x80000000 0x20000000>; }; + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; + }; + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -49,13 +56,17 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>; - clock-names = "ipg", "ahb"; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts new file mode 100644 index 000000000000..ec6651ba4ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus i.MX6Quad board"; + compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi index 3def1b621c8e..2731faede1cb 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi @@ -105,6 +105,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -232,13 +233,16 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-mode = "rmii"; phy-supply = <®_3v3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 41e08fa23cce..b72ec745f6d1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1049,8 +1049,8 @@ clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; + <&clks IMX6QDL_CLK_ENET_REF_SEL>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; fsl,stop-mode = <&gpr 0x34 27>; nvmem-cells = <&fec_mac_addr>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts new file mode 100644 index 000000000000..4a961a33bf2d --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board"; + compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts new file mode 100644 index 000000000000..2694fe18a91b --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-vision.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Tolino Vison ebook reader + * + * Name on mainboard is: 37NB-E60Q30+4A3 + * Serials start with: 6032 + * + * Copyright 2023 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "Tolino Vision"; + compatible = "kobo,tolino-vision", "fsl,imx6sl"; + + aliases { + mmc0 = &usdhc4; + mmc1 = &usdhc2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_power>; + regulator-name = "backlight"; + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-cover { + /* magnetic sensor in the corner next to the uSD slot */ + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + key-fl { + label = "Frontlight"; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BRIGHTNESS_CYCLE>; + }; + + key-power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + /* LED on home button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* LED on power button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + touchscreen@15 { + compatible = "elan,ektf2132"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>; + }; + + accelerometer@1d { + compatible = "fsl,mma8652"; + reg = <0x1d>; + }; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + ec: embedded-controller@43 { + compatible = "netronix,ntxec"; + reg = <0x43>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec>; + interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + }; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + /* J4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + /* J9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* removable uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* CyberTan WC121 (BCM43362) SDIO WiFi */ +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc4>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + pinctrl-3 = <&pinctrl_usdhc4_sleep>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; + + /* internal eMMC */ +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight_power: backlight-powergrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 + >; + }; + + pinctrl_ec: ecgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x17000 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x110B0 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x110B0 + MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x11030 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059 + MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x17059 + MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x17059 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x110B0 + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x1B0B1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x1b0b1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x17059 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x13059 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x17059 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x17059 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x17059 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x17059 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x17059 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x17059 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x17059 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x17059 + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170b9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130b9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170b9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170b9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170b9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170b9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170b9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170b9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170b9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170f9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130f9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170f9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170f9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170f9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170f9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170f9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170f9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170f9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4_sleep: usdhc4-sleepgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x100c1 + MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x100c1 + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x100c1 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x100c1 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x100c1 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x100c1 + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x100c1 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x100c1 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x100c1 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts index c18390f238e1..b7c96fbe7a91 100644 --- a/arch/arm/boot/dts/imx6ul-prti6g.dts +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -26,6 +26,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet1_ref_pad"; }; leds { @@ -60,6 +61,13 @@ status = "okay"; }; +&clks { + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad"; + assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081_out>; +}; + &ecspi1 { cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -85,12 +93,6 @@ pinctrl-0 = <&pinctrl_eth1>; phy-mode = "rmii"; phy-handle = <&rmii_phy>; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clock_ksz8081_out>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f0a9139748b8..3d9d0f823568 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -531,10 +531,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET2_REF_125M>, - <&clks IMX6UL_CLK_ENET2_REF_125M>; + <&clks IMX6UL_CLK_ENET2_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; @@ -879,10 +878,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET_REF>, - <&clks IMX6UL_CLK_ENET_REF>; + <&clks IMX6UL_CLK_ENET1_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi new file mode 100644 index 000000000000..3fdece5bd31f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6ull.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; /* eMMC */ + }; + + chosen { + stdout-path = &uart4; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&pinctrl_emmc_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + }; + + reg_dcdc_3v3: regulator-dcdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "dcdc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "ldo-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_status_leds>; + + led-1 { + function = LED_FUNCTION_BOOT; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + led-2 { + function = LED_FUNCTION_PROGRAMMING; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_motor + &pinctrl_adc_cp + &pinctrl_adc_pp>; + vref-supply = <&vgen1_reg>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <3>; + cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH + &gpio3 2 GPIO_ACTIVE_HIGH + &gpio3 4 GPIO_ACTIVE_HIGH>; +}; + +&ecspi4 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-cs = <1>; + cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 + &pinctrl_enet1_phy_rst + &pinctrl_enet_mdio>; + phy-supply = <®_dcdc_3v3>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy_int>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + max-speed = <100>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "CP_INVERT", + "", + "", /* 15 */ + "", + "", + "", + "MOTOR_1_FAULT_N", + "", /* 20 */ + "", + "ROTARY_SWITCH_1_2_N", + "ROTARY_SWITCH_1_4_N", + "ROTARY_SWITCH_1_8_N", + "MOTOR_2_FAULT_N"; /* 25 */ +}; + +&gpio3 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "EXT_GPIO", + "MOTOR_1_DRIVER_IN1_N", + "MOTOR_1_DRIVER_IN2", + "MOTOR_2_DRIVER_IN1", + "STM32_BOOT0", /* 10 */ + "STM32_RST_N", + "RELAY_1_ENABLE", + "RELAY_2_ENABLE", + "", + "", /* 15 */ + "QCA700X_MAINS_BOOTLOADER_N", + "QCA700X_CP_RST_N", + "QCA700X_CP_BOOTLOADER_N", + "", + "DIGITAL_OUT_1", /* 20 */ + "DIGITAL_OUT_2", + "DIGITAL_OUT_3", + "DIGITAL_OUT_4", + "DIGITAL_OUT_5", + "DIGITAL_OUT_6", /* 25 */ + "ROTARY_SWITCH_2_8_N", + "ROTARY_SWITCH_2_4_N", + "ROTARY_SWITCH_2_2_N"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "BOARD_VARIANT_1", + "BOARD_VARIANT_2", + "BOARD_VARIANT_0", /* 15 */ + "BOARD_VARIANT_3", + "", + "ROTARY_SWITCH_2_1_N", + "", + "DIGITAL_IN_5", /* 20 */ + "", + "", + "DIGITAL_IN_6", + "", + "DIGITAL_IN_1", /* 25 */ + "DIGITAL_IN_2", + "DIGITAL_IN_4", + "DIGITAL_IN_3"; + + pmic-int-hog { + gpio-hog; + gpios = <19 0>; + input; + }; +}; + +&gpio5 { + gpio-line-names = "ROTARY_SWITCH_1_1_N", /* 0 */ + "", + "RELAY_2_SENSE", + "RELAY_1_SENSE", + "", + "", /* 5 */ + "", + "QCA700X_MAINS_RST_N", + "MOTOR_2_DRIVER_IN2", + "", + "CP_POSITIVE_PEAK_RST", /* 10 */ + "CP_NEGATIVE_PEAK_RST"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3001: pmic@8 { + compatible = "fsl,pfuze3001"; + reg = <0x08>; + + regulators { + sw1_reg: sw1 { + regulator-name = "SW1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-name = "SW2"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-name = "SW3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-name = "VSNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-name = "VLDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-name = "VLDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-name = "VCCSD"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-name = "V33"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-name = "VLDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-name = "VLDO4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + + accelerometer@19 { + compatible = "st,iis328dq", "st,h3lis331dl-accel"; + reg = <0x19>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>; + vdd-supply = <®_dcdc_3v3>; + vddio-supply = <®_dcdc_3v3>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_var + &pinctrl_digital_input + &pinctrl_digital_output + &pinctrl_gpio_motor + &pinctrl_hog_pins + &pinctrl_rotary_switch1 + &pinctrl_rotary_switch2>; + + pinctrl_adc_cp: adc-cpgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_adc_motor: adc-motorgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_adc_pp: adc-ppgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0xb0 + >; + }; + + pinctrl_board_var: board-vargrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__GPIO4_IO15 0xb0 + MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0xb0 + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0xb0 + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0 + >; + }; + + pinctrl_digital_input: digital-inputgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0xb0 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0xb0 + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0xb0 + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0xb0 + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0xb0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0xb0 + >; + }; + + pinctrl_digital_output: digital-outputgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x400000b0 + MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x400000b0 + MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x400000b0 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x400000b0 + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x400000b0 + MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x400000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0xb0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xb0 + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x10b0 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x10b0 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x10b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x10b0 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x10b0 + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x10b0 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x10b0 + >; + }; + + pinctrl_emmc_rst: emmc-rstgrp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x400010b0 + >; + }; + + pinctrl_enet_mdio: enet-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10b0 + >; + }; + + pinctrl_enet1_phy_int: enet1-phy-intgrp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x100b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x100b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0xb0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0xb0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0xb0 + >; + }; + + pinctrl_ext_uart: ext-uartgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0xb0 + MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0xb0 + >; + }; + + pinctrl_fan_enable: fan-enablegrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x400000b0 + >; + }; + + pinctrl_gpio_motor: gpio-motorgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x400000b0 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x400000b0 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x400000b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0xb0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0xb0 + >; + }; + + pinctrl_hog_pins: hog-pinsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x400000b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x400000b0 + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x400070a0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x400000b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x400000b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x400008b0 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x400008b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x70b1 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0xb0 + >; + }; + + pinctrl_pwm_cp: pinctrl-pwm-cpgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x60a0 + >; + }; + + pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0xb0 + >; + }; + + pinctrl_pwm_fan: pwm-fangrp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x60a0 + >; + }; + + pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x400000b0 + >; + }; + + pinctrl_qca700x_cp_int: qca700x-cp-intgrp { + fsl,pins = < + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x10b0 + >; + }; + + pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x400000b0 + >; + }; + + pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x400000b0 + >; + }; + + pinctrl_rotary_switch1: rotary-switch1grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0xb0 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0xb0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0xb0 + >; + }; + + pinctrl_rotary_switch2: rotary-switch2grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0xb0 + MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0xb0 + MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0xb0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0xb0 + >; + }; + + pinctrl_rs485_1: rs485-1grp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0xb0 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0xb0 + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0xb0 + >; + }; + + pinctrl_rs485_2: rs485-2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x10b0 + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x10b0 + >; + }; + + pinctrl_status_leds: status-ledsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0xb0 + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0xb0 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0xb0 + >; + }; + + pinctrl_stm32: stm32grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x10b0 + MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0xb0 + MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0xb0 + >; + }; + + pinctrl_usb: usbgrp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x70b0 + MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x70b0 + >; + }; + + pinctrl_usb_pwr: usb-pwrgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0xb0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x7071 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x7071 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x7071 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x7071 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x7071 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x7071 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x7071 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x7071 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x7071 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x7071 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70b1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70b1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70b1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70b1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70b1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70b1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70b1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70b1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70b1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70b1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70f1 + >; + }; + + pinctrl_wdog2: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x10b0 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default_snvs"; + pinctrl-0 = <&pinctrl_cp_peak_snvs + &pinctrl_gpio_motor_snvs + &pinctrl_relay_sense_snvs + &pinctrl_rotary_switch1_snvs>; + + pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x130a0 + >; + }; + + pinctrl_cp_peak_snvs: cp-peak-snvsgrp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x130a0 + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 + >; + }; + + pinctrl_enet1_phy_rst: enet1-phy-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x100a0 + >; + }; + + pinctrl_fan_sense_snvs: fan-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x100a0 + >; + }; + + pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 + >; + }; + + pinctrl_qca700x_mains_int: qca700x-mains-intgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x130a0 + >; + }; + + pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400100a0 + >; + }; + + pinctrl_relay_sense_snvs: relay-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x100a0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x100a0 + >; + }; + + pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x110a0 + >; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_digital_input_ref>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_cp>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,dte-mode; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_2>; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stm32>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_uart>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb + &pinctrl_usb_pwr>; + dr_mode = "host"; + power-active-high; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usbphy2 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <&sw2_reg>; + vqmmc-supply = <®_1v8>; + mmc-pwrseq = <&emmc_pwrseq>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog2>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts new file mode 100644 index 000000000000..67007ce383e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Master"; + compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&ecspi4 { + status = "okay"; + + qca700x_mains: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_mains_int + &pinctrl_qca700x_mains_rst + &pinctrl_qca700x_mains_btld>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts new file mode 100644 index 000000000000..e471c2005bee --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Micro"; + compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts new file mode 100644 index 000000000000..cee223b5f8e1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Slave"; + compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull"; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts new file mode 100644 index 000000000000..7fd53b7a4372 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon SlaveXT"; + compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 427f8d04ec89..92cb45dacda6 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { model = "reMarkable 2.0"; @@ -69,6 +70,17 @@ startup-delay-us = <100000>; /* 100 ms */ }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -79,6 +91,10 @@ }; }; +&cpu0 { + cpu-supply = <&buck1>; +}; + &clks { assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, <&clks IMX7D_CLKO2_ROOT_DIV>; @@ -106,6 +122,193 @@ }; }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + bd71815: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bd71815>; + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */ + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>; + clock-output-names = "bd71815-32k-out"; + #clock-cells = <0>; + #gpio-cells = <2>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-boot-on; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + reg = <0>; + linux,keycodes = <KEY_HOMEPAGE>; + }; + + button@1 { + reg = <1>; + linux,keycodes = <KEY_MENU>; + }; + + button@2 { + reg = <2>; + linux,keycodes = <KEY_BACK>; + }; + + button@3 { + reg = <3>; + linux,keycodes = <KEY_SEARCH>; + }; + + button@4 { + reg = <4>; + linux,keycodes = <KEY_VOLUMEDOWN>; + }; + + button@5 { + reg = <5>; + linux,keycodes = <KEY_VOLUMEUP>; + }; + + button@6 { + reg = <6>; + linux,keycodes = <KEY_CAMERA>; + }; + + button@7 { + reg = <7>; + linux,keycodes = <KEY_POWER>; + }; + }; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "sleep"; @@ -216,6 +419,12 @@ }; &iomuxc { + pinctrl_bd71815: bd71815grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59 + >; + }; + pinctrl_brcm_reg: brcmreggrp { fsl,pins = < /* WIFI_PWR_EN */ @@ -230,6 +439,15 @@ >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -237,6 +455,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f @@ -244,6 +476,13 @@ >; }; + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7ceb7c09f7ad..4b94b8afb55d 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -165,6 +165,15 @@ reg = <0x306d0000 0x10000>; status = "disabled"; }; + + pxp: pxp@30700000 { + compatible = "fsl,imx7d-pxp"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PXP_CLK>; + clock-names = "axi"; + }; }; &aips3 { diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index bd4230d7dac9..765ab36e6f0c 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -56,7 +56,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Coyote PCI boardfile. @@ -80,7 +80,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -102,7 +102,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 92b987bc3f99..6f5b4e4eb1cc 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -112,7 +112,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Vulcan PCI boardfile. @@ -137,7 +137,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -159,7 +159,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 5ab09fb10dae..b9d46eb06507 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -122,7 +122,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c) diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index b740403b05a9..5a5e16cc7335 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -159,7 +159,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Written based on the FSG-3 PCI boardfile. @@ -187,7 +187,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -209,7 +209,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts index b7cbc90e1c18..4d70f6afd13a 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts @@ -53,7 +53,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c) @@ -74,7 +74,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -91,7 +91,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a5943f51e8c2..97e3f25bb210 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -108,7 +108,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Avila PCI boardfile. @@ -142,7 +142,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -164,7 +164,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts index f80388b17a9e..9ec0169bacf8 100644 --- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts @@ -82,7 +82,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * The device has 4 slots (IDSEL) with one dedicated IRQ per slot. @@ -148,7 +148,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 32>; phy-mode = "rgmii"; @@ -170,7 +170,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 33>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index cbc87b344f6a..8da6823e1dbe 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -109,7 +109,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NAS 100D PCI boardfile (nas100d-pci.c) @@ -129,7 +129,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts index beaadda4685f..194945748dc3 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts @@ -40,7 +40,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -62,7 +62,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index f17cab12a64b..7011fea6205b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -61,7 +61,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDPG425 PCI boardfile. @@ -95,7 +95,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -117,7 +117,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 0edc5928e00b..da1e93212b86 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -116,7 +116,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant @@ -143,7 +143,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 5e7e31b74b04..4aba9e0214a0 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -117,7 +117,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. @@ -141,7 +141,7 @@ * Do we need a new binding and property for this? */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -165,7 +165,7 @@ /* EthC - connected to KS8995 switch port 5 */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts index df2ca6d95ee5..19d56e9aec9d 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts @@ -54,7 +54,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) @@ -77,7 +77,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts index b444003c10e1..c550c421b659 100644 --- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts +++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts @@ -79,7 +79,7 @@ /* LAN port */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index cf4010d60187..1db849515f9e 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -121,7 +121,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * In the boardfile for the Cambria from OpenWRT the interrupts @@ -167,7 +167,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -188,7 +188,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts index 3d7cfa1a5ed4..4703a8b24765 100644 --- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts +++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts @@ -36,7 +36,7 @@ /* CHECKME: ethernet set-up taken from Gateworks Cambria */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -57,7 +57,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index 146352ba848b..31c0a69771c4 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -99,7 +99,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDP425 PCI boardfile. diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 5d6d074011df..abd5aef8b87d 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 88be868cf71e..3a87b7943c70 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -534,7 +534,7 @@ &dss { pinctrl-names = "default"; pinctrl-0 = <&vout_pins>; - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 4352397b4f52..1f762af6f502 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 1c880cf8fa91..3a69f65de81e 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index f9f4b0143ba8..0c0851cd9bec 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -232,7 +232,7 @@ port@6 { reg = <6>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -251,6 +251,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts index 60c1e94f5dd3..9fd3581bb24b 100644 --- a/arch/arm/boot/dts/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -254,7 +254,6 @@ port@6 { reg = <6>; - label = "cpu"; phy-mode = "rgmii-id"; ethernet = <ð1port>; fixed-link { @@ -330,6 +329,7 @@ ethernet1-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 2f9660f3b457..27fd6e2337d5 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -198,7 +198,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -221,6 +221,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index ced576acfb95..5a77286136c7 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -149,7 +149,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -166,6 +166,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index e21aa674945d..9d62f910cddf 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -105,7 +105,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 21eb59041a7d..4f22ab451aae 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -506,6 +506,15 @@ }; }; + sdxc_a_pins: sdxc-a { + mux { + groups = "sdxc_d0_a", "sdxc_d13_a", + "sdxc_clk_a", "sdxc_cmd_a"; + function = "sdxc_a"; + bias-pull-up; + }; + }; + sdxc_b_pins: sdxc-b { mux { groups = "sdxc_d0_b", "sdxc_d13_b", @@ -568,6 +577,14 @@ bias-disable; }; }; + + xtal_32k_out_pins: xtal-32k-out { + mux { + groups = "xtal_32k_out"; + function = "xtal"; + bias-disable; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d5a3fe21e8e7..5979209fe91e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -580,8 +580,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson8b-gpio-intc"; + compatible = "amlogic,meson8b-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index fa6d55f1cfb9..aa4d4bf70629 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -19,7 +19,6 @@ ethernet0 = ðmac; i2c0 = &i2c_AO; serial0 = &uart_AO; - serial1 = &uart_A; mmc0 = &sd_card_slot; }; @@ -45,12 +44,32 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + + pinctrl-0 = <&xtal_32k_out_pins>; + pinctrl-names = "default"; + + reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, + <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; + + clocks = <&xtal_32k_out>; + clock-names = "ext_clock"; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + xtal_32k_out: xtal-32k-out-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k_out"; + }; }; &cpu0 { @@ -192,6 +211,27 @@ vref-supply = <&vddio_ao1v8>; }; +/* SDIO wifi */ +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_a_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + max-frequency = <50000000>; + + disable-wp; + non-removable; + cap-mmc-highspeed; + cap-sd-highspeed; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + &sdio { status = "okay"; @@ -222,6 +262,12 @@ pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm20702a1"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; }; &uart_AO { diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 0a0fe8c5a405..ce6a4015fed5 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -359,7 +359,7 @@ mediatek,apmixedsys = <&apmixedsys>; }; - nandc: nfi@1100d000 { + nandc: nand-controller@1100d000 { compatible = "mediatek,mt2701-nfc"; reg = <0 0x1100d000 0 0x1000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 5008115d2494..ece61a6a7a89 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -322,6 +322,12 @@ vqmmc-supply = <®_3p3v>; }; +&mt6323keys { + home { + status = "disabled"; + }; +}; + &mt6323_leds { status = "okay"; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 1e96c865d41d..8adc0ef01f6c 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -14,7 +14,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - uart@3,0 { + serial@3,0 { compatible = "ns16550a"; reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ bank-width = <2>; @@ -50,7 +50,7 @@ gpmc,wr-data-mux-bus-ns = <45>; gpmc,wr-access-ns = <145>; }; - uart@3,1 { + serial@3,1 { compatible = "ns16550a"; reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ bank-width = <2>; @@ -61,7 +61,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,2 { + serial@3,2 { compatible = "ns16550a"; reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ bank-width = <2>; @@ -72,7 +72,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,3 { + serial@3,3 { compatible = "ns16550a"; reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ bank-width = <2>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 35eced6521ef..1a085bc01317 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 48e48b0c8190..e1b1a047f77a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 87e0ab1bbe95..4183fde46059 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,8 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; - + compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -612,6 +611,22 @@ clock-frequency = <100000>; }; +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 9dca5bfc87ab..eadb5b857f48 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index c6f863bc03ad..3f0197ceae09 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 8e9c12cf51a7..bc95a8df2e6a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 5188f96f431e..d36ceecb7328 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index ecb4ef738e07..f6bbea2be54c 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index d211bcc31174..a3cf3f443785 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b2f480022ff6..cbaf79c4e842 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 7f04dfad8203..3eb935df04dc 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index bc5a04e03336..3af8d10d7224 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index 065c31cbf0e2..813e3c9fe3b6 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index e38c1c51392c..8405bd9262de 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index e6dc23159c4d..b9558d736e79 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index 587c08ce282d..fcfc449f2abe 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index f57de6010994..6d14466c180a 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 281af6c113be..bcf20ff3f281 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index ea509956d7ac..c0252f8a798a 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index eb3893b9535e..4c36bde62491 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index b6879cdc5c13..0591af494184 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index ce58b1f208e8..ab52e8d68f76 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts index 4f4888ec9138..fb203e7d37f5 100644 --- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -137,8 +137,12 @@ port@3 { reg = <3>; - label = "cpu"; ethernet = <ðport>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; port@5 { @@ -208,6 +212,7 @@ /* Hardwired to DSA switch */ speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts deleted file mode 100644 index c59e06ff2423..000000000000 --- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox810se.dtsi" - -/ { - model = "Western Digital My Book World Edition"; - - compatible = "wd,mbwe", "oxsemi,ox810se"; - - chosen { - bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x48000000 0x8000000>; - }; - - aliases { - serial1 = &uart1; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio0 0 1>; - linux,code = <0x198>; - }; - - recovery { - label = "recovery"; - gpios = <&gpio0 4 1>; - linux,code = <0xab>; - }; - }; - - leds { - compatible = "gpio-leds"; - - a0 { - label = "activity0"; - gpios = <&gpio0 25 0>; - default-state = "keep"; - }; - - a1 { - label = "activity1"; - gpios = <&gpio0 26 0>; - default-state = "keep"; - }; - - a2 { - label = "activity2"; - gpios = <&gpio0 5 0>; - default-state = "keep"; - }; - - a3 { - label = "activity3"; - gpios = <&gpio0 6 0>; - default-state = "keep"; - }; - - a4 { - label = "activity4"; - gpios = <&gpio0 7 0>; - default-state = "keep"; - }; - - a5 { - label = "activity5"; - gpios = <&gpio1 2 0>; - default-state = "keep"; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio0 3 0 /* sda */ - &gpio0 2 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rtc0: rtc@48 { - compatible = "st,m41t00"; - reg = <0x68>; - }; - }; -}; - -ða { - status = "okay"; -}; - -&uart1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi deleted file mode 100644 index 96c0745f7b70..000000000000 --- a/arch/arm/boot/dts/ox810se.dtsi +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/clock/oxsemi,ox810se.h> -#include <dt-bindings/reset/oxsemi,ox810se.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox810se"; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - clocks = <&armclk>; - }; - }; - - memory { - device_type = "memory"; - /* Max 256MB @ 0x48000000 */ - reg = <0x48000000 0x10000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - rpsclk: rpsclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc>; - }; - - pll400: pll400 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <733333333>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&pll400>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll400>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&intc>; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox810se-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <8>; - interrupt-names = "macirq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk 6>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0a { - pins = "gpio31"; - function = "fct3"; - }; - uart0b { - pins = "gpio32"; - function = "fct3"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0c { - pins = "gpio27"; - function = "fct3"; - }; - uart0d { - pins = "gpio28"; - function = "fct3"; - }; - uart0e { - pins = "gpio29"; - function = "fct3"; - }; - uart0f { - pins = "gpio30"; - function = "fct3"; - }; - uart0g { - pins = "gpio33"; - function = "fct3"; - }; - uart0h { - pins = "gpio34"; - function = "fct3"; - }; - }; - - pinctrl_uart1: uart1 { - uart1a { - pins = "gpio20"; - function = "fct3"; - }; - uart1b { - pins = "gpio22"; - function = "fct3"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1c { - pins = "gpio8"; - function = "fct3"; - }; - uart1d { - pins = "gpio9"; - function = "fct3"; - }; - uart1e { - pins = "gpio23"; - function = "fct3"; - }; - uart1f { - pins = "gpio24"; - function = "fct3"; - }; - uart1g { - pins = "gpio25"; - function = "fct3"; - }; - uart1h { - pins = "gpio26"; - function = "fct3"; - }; - }; - - pinctrl_uart2: uart2 { - uart2a { - pins = "gpio6"; - function = "fct3"; - }; - uart2b { - pins = "gpio7"; - function = "fct3"; - }; - }; - - pinctrl_uart2_modem: uart2_modem { - uart2c { - pins = "gpio0"; - function = "fct3"; - }; - uart2d { - pins = "gpio1"; - function = "fct3"; - }; - uart2e { - pins = "gpio2"; - function = "fct3"; - }; - uart2f { - pins = "gpio3"; - function = "fct3"; - }; - uart2g { - pins = "gpio4"; - function = "fct3"; - }; - uart2h { - pins = "gpio5"; - function = "fct3"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x100000 0x100000>; - interrupts = <22>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <3>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 3>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - clocks = <&sysclk>; - interrupts = <23>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x300000 0x100000>; - clocks = <&sysclk>; - interrupts = <24>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART2>; - }; - - uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART3>; - }; - - uart3: serial@a00000 { - compatible = "ns16550a"; - reg = <0xa00000 0x100000>; - clocks = <&sysclk>; - interrupts = <30>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART4>; - }; - }; - - apb-bridge@45000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x45000000 0x1000000>; - - sys: sys-ctrl@0 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - - rps@300000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x300000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox810se-rps-timer"; - reg = <0x200 0x40>; - clocks = <&rpsclk>; - interrupts = <4 5>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts deleted file mode 100644 index c3daceccde55..000000000000 --- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Cloud Engines PogoPlug Series 3"; - - compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - leds { - compatible = "gpio-leds"; - - blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - - orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - - green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index dde4364892bf..000000000000 --- a/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/oxsemi,ox820.h> -#include <dt-bindings/reset/oxsemi,ox820.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox820"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "oxsemi,ox820-smp"; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <1>; - }; - }; - - memory { - device_type = "memory"; - /* Max 512MB @ 0x60000000 */ - reg = <0x60000000 0x20000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <850000000>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&gic>; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox820-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0 { - pins = "gpio30", "gpio31"; - function = "fct5"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0_modem_a { - pins = "gpio24", "gpio24", "gpio26", "gpio27"; - function = "fct4"; - }; - uart0_modem_b { - pins = "gpio28", "gpio29"; - function = "fct5"; - }; - }; - - pinctrl_uart1: uart1 { - uart1 { - pins = "gpio7", "gpio8"; - function = "fct4"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1_modem { - pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; - function = "fct4"; - }; - }; - - pinctrl_etha_mdio: etha_mdio { - etha_mdio { - pins = "gpio3", "gpio4"; - function = "fct1"; - }; - }; - - pinctrl_nand: nand { - nand { - pins = "gpio12", "gpio13", "gpio14", "gpio15", - "gpio16", "gpio17", "gpio18", "gpio19", - "gpio20", "gpio21", "gpio22", "gpio23", - "gpio24"; - function = "fct1"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x000000 0x100000>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x100000 0x100000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <18>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 18>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART2>; - }; - - rps@400000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x400000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox820-rps-timer"; - reg = <0x200 0x40>; - clocks = <&sysclk>; - interrupt-parent = <&intc>; - interrupts = <4>; - }; - }; - - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; - - reset: reset-controller { - compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - }; - - apb-bridge@47000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x47000000 0x1000000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; - reg = <0x0 0x100>; - }; - - local-timer@600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&armclk>; - }; - - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1000 0x1000>, - <0x100 0x500>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92aa2b081901..672b246afbba 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -388,21 +388,37 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; acc2: clock-controller@20a8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu2_aux"; + #clock-cells = <0>; }; acc3: clock-controller@20b8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu3_aux"; + #clock-cells = <0>; }; saw0: power-controller@2089000 { @@ -879,8 +895,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -1260,7 +1279,7 @@ gpu_opp_table: opp-table { compatible = "operating-points-v2"; - opp-320000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; }; @@ -1494,8 +1513,8 @@ num-lanes = <1>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, /* I/O */ - <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */ + <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fabd7455eb8f..b653ea40c441 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -654,25 +654,25 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi index a5a6f3ebb274..d90b4f4c63af 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -8,6 +8,14 @@ model = "ALFA Network AP120C-AC"; compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + keys { compatible = "gpio-keys"; @@ -68,7 +76,7 @@ }; }; - usb-power { + usb-power-hog { line-name = "USB-power"; gpios = <1 GPIO_ACTIVE_HIGH>; gpio-hog; @@ -162,6 +170,17 @@ label = "ART"; reg = <0x00170000 0x00010000>; read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; }; partition@180000 { @@ -178,7 +197,7 @@ }; }; - nand@1 { + flash@1 { compatible = "spi-nand"; reg = <1>; spi-max-frequency = <40000000>; @@ -225,10 +244,14 @@ &wifi0 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 02e9ea78405d..dfcfb3339c23 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -143,7 +143,6 @@ sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32000>; - clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; @@ -190,6 +189,8 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; }; prng: rng@22000 { @@ -325,22 +326,22 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { + acc0: power-manager@b088000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; }; - acc1: clock-controller@b098000 { + acc1: power-manager@b098000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; }; - acc2: clock-controller@b0a8000 { + acc2: power-manager@b0a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; }; - acc3: clock-controller@b0b8000 { + acc3: power-manager@b0b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; }; @@ -426,8 +427,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 52d77e105957..af6764770fd1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -569,16 +569,20 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; + #clock-cells = <0>; }; acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { @@ -590,6 +594,10 @@ acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw1: regulator@2099000 { @@ -1081,8 +1089,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1132,8 +1140,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1183,8 +1191,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 8e9ea61a1e48..b40c52ddf9b4 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -116,7 +116,7 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index c373081bc21b..42acb9ddb8cc 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> @@ -377,6 +378,11 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; }; mmcc: clock-controller@fd8c0000 { diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 86f76d0feff4..f601b40ebcf4 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -473,7 +473,7 @@ }; l2cc: clock-controller@2082000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon"; reg = <0x02082000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a0369b38fe07..2a668cd535cc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -182,8 +182,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -204,11 +207,19 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 834ad95515b1..8208012684d4 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -418,22 +418,22 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; @@ -1057,7 +1057,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts index d5343bb0daee..51058b065279 100644 --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts @@ -242,6 +242,23 @@ status = "okay"; }; +&pcie_phy { + vdda-phy-supply = <&vreg_l1e_bb_1p2>; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + + status = "okay"; +}; + +&pcie_rc { + perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -261,21 +278,48 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_default: pcie-default-state { + clkreq-pins { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-pins { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index ad74ecc2a196..8fadc6e70692 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -242,19 +242,22 @@ status = "okay"; }; -&pcie0_phy { - status = "okay"; - +&pcie_phy { vdda-phy-supply = <&vreg_l1e_bb_1p2>; vdda-pll-supply = <&vreg_l4e_bb_0p875>; -}; -&pcie_ep { status = "okay"; +}; +&pcie_ep { pinctrl-names = "default"; pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default &pcie_ep_wake_default>; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; }; &qpic_bam { @@ -277,8 +280,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &tlmm { @@ -305,16 +308,18 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index df7303c5c843..342c3d14001e 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -304,7 +304,135 @@ status = "disabled"; }; - pcie0_phy: phy@1c07000 { + pcie_rc: pcie@1c00000 { + compatible = "qcom,pcie-sdx55"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_PIPE_CLK>, + <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep"; + + assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x0200 0x1>, + <0x100 &apps_smmu 0x0201 0x1>, + <0x200 &apps_smmu 0x0202 0x1>, + <0x300 &apps_smmu 0x0203 0x1>, + <0x400 &apps_smmu 0x0204 0x1>; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", + "doorbell"; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c07000 { compatible = "qcom,sdx55-qmp-pcie-phy"; reg = <0x01c07000 0x1c4>; #address-cells = <1>; @@ -314,7 +442,10 @@ <&gcc GCC_PCIE_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, <&gcc GCC_PCIE_RCHNG_PHY_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; resets = <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy"; @@ -324,7 +455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06000 { + pcie_lane: lanes@1c06000 { reg = <0x01c06000 0x104>, /* tx0 */ <0x01c06200 0x328>, /* rx0 */ <0x01c07200 0x1e8>, /* pcs */ @@ -385,7 +516,7 @@ }; tcsr: syscon@1fcb000 { - compatible = "syscon"; + compatible = "qcom,sdx55-tcsr", "syscon"; reg = <0x01fc0000 0x1000>; }; @@ -401,45 +532,6 @@ status = "disabled"; }; - pcie_ep: pcie-ep@40000000 { - compatible = "qcom,sdx55-pcie-ep"; - reg = <0x01c00000 0x3000>, - <0x40000000 0xf1d>, - <0x40000f20 0xc8>, - <0x40001000 0x1000>, - <0x40200000 0x100000>, - <0x01c03000 0x3000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", - "mmio"; - - qcom,perst-regs = <&tcsr 0xb258 0xb270>; - - clocks = <&gcc GCC_PCIE_AUX_CLK>, - <&gcc GCC_PCIE_CFG_AHB_CLK>, - <&gcc GCC_PCIE_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_SLV_AXI_CLK>, - <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_SLEEP_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>; - clock-names = "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", "sleep", "ref"; - - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global", "doorbell"; - reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; - resets = <&gcc GCC_PCIE_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE_GDSC>; - phys = <&pcie0_lane>; - phy-names = "pciephy"; - max-link-speed = <3>; - num-lanes = <2>; - - status = "disabled"; - }; - remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index ed98c83c141f..57bc3b03d3aa 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -245,6 +245,11 @@ status = "okay"; }; +&ipa { + qcom,gsi-loader = "skip"; + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -265,8 +270,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &usb { @@ -278,14 +283,14 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4b_0p88>; vdda33-supply = <&vreg_l10b_3p08>; vdda18-supply = <&vreg_l5b_1p8>; + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4b_0p88>; vdda-pll-supply = <&vreg_l1b_1p2>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 192f9f94bc8b..525dd8a1f664 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/interconnect/qcom,sdx65.h> / { #address-cells = <1>; @@ -223,16 +224,15 @@ "qcom,usb-snps-hs-7nm-phy"; reg = <0xff4000 0x120>; #phy-cells = <0>; - status = "disabled"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_BCR>; + status = "disabled"; }; usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c8>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -246,6 +246,8 @@ <&gcc GCC_USB3_PHY_BCR>; reset-names = "phy", "common"; + status = "disabled"; + usb_ssphy: phy@ff6200 { reg = <0x00ff6e00 0x160>, <0x00ff7000 0x1ec>, @@ -299,6 +301,44 @@ #hwlock-cells = <1>; }; + ipa: ipa@3f40000 { + compatible = "qcom,sdx65-ipa"; + + reg = <0x03f40000 0x10000>, + <0x03f50000 0x5000>, + <0x03e04000 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>, + <&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; @@ -355,7 +395,6 @@ usb: usb@a6f8800 { compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; reg = <0x0a6f8800 0x400>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -385,6 +424,8 @@ resets = <&gcc GCC_USB30_BCR>; + status = "disabled"; + usb_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0x0a600000 0xcd00>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 0af63ddc4473..fa09295052c6 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -196,6 +196,19 @@ &i2c0 { status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + eeprom@50 { + compatible = "st,24c01", "atmel,24c01"; + reg = <0x50>; + pagesize = <16>; + }; + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -205,12 +218,6 @@ pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - - wm8978: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; }; &i2c2 { diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 5f05f2b44a48..fd40890bd77b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r8a7779.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -66,6 +67,51 @@ vdd33a-supply = <&fixedregulator3v3>; }; + keyboard-irq { + compatible = "gpio-keys"; + + pinctrl-0 = <&keyboard_irq_pins>; + pinctrl-names = "default"; + + interrupt-parent = <&gpio0>; + + key-1 { + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_1>; + label = "SW1-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_2>; + label = "SW1-2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + keyboard-gpio { + compatible = "gpio-keys-polled"; + poll-interval = <50>; + + pinctrl-0 = <&keyboard_gpio_pins>; + pinctrl-names = "default"; + + key-3 { + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW1-3"; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW1-4"; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; led2 { @@ -161,6 +207,20 @@ }; }; +&gpio0 { + keyboard-irq-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; + input; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <100000>; +}; + &irqpin0 { status = "okay"; }; @@ -223,6 +283,15 @@ groups = "hspi0"; function = "hspi0"; }; + + keyboard_irq_pins: keyboard-irq { + pins = "GP_0_17", "GP_0_18"; + bias-pull-up; + }; + keyboard_gpio_pins: keyboard-gpio { + pins = "GP_0_19", "GP_0_20"; + bias-pull-up; + }; }; &sata { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 39fc58f32df6..97b767d81d92 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -324,6 +324,69 @@ status = "disabled"; }; + pwm0: pwm@ffe50000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe50000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@ffe51000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe51000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@ffe52000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe52000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@ffe53000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe53000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@ffe54000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe54000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@ffe55000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe55000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@ffe56000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe56000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; @@ -554,7 +617,8 @@ compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; - clocks = <&cpg_clocks R8A7779_CLK_S>, + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -572,20 +636,21 @@ <&cpg_clocks R8A7779_CLK_P>; #clock-cells = <1>; clock-indices = < - R8A7779_CLK_HSPI R8A7779_CLK_TMU2 - R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 - R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 - R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 - R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 - R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 - R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 - R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + R8A7779_CLK_PWM R8A7779_CLK_HSPI + R8A7779_CLK_TMU2 R8A7779_CLK_TMU1 + R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1 + R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5 + R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3 + R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1 + R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 + R8A7779_CLK_I2C2 R8A7779_CLK_I2C1 + R8A7779_CLK_I2C0 >; clock-output-names = - "hspi", "tmu2", "tmu1", "tmu0", "hscif1", - "hscif0", "scif5", "scif4", "scif3", "scif2", - "scif1", "scif0", "i2c3", "i2c2", "i2c1", - "i2c0"; + "pwm", "hspi", "tmu2", "tmu1", "tmu0", + "hscif1", "hscif0", "scif5", "scif4", "scif3", + "scif2", "scif1", "scif0", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2f2e483a2c2a..46fb81f5062f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -376,6 +376,17 @@ reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7790", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7790-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1037,6 +1048,76 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + can0: can@e6e80000 { compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 27fb06ce907e..8b58773e592e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -5,6 +5,12 @@ * Copyright 2015 Google, Inc */ +/ { + aliases { + mmc1 = &sdmmc; + }; +}; + &io_domains { sdcard-supply = <&vccio_sd>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index e406c8c7c7e5..d838bf0d5d9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + aliases { + mmc0 = &emmc; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 511ca864c1b2..cb9cdaddffd4 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1114,7 +1114,7 @@ status = "disabled"; }; - mipi_dsi: mipi@ff960000 { + mipi_dsi: dsi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x4000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1125,18 +1125,28 @@ status = "disabled"; ports { - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + mipi_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_mipi>; }; + mipi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_mipi>; }; }; + + mipi_out: port@1 { + reg = <1>; + }; }; }; @@ -1157,7 +1167,6 @@ lvds_in: port@0 { reg = <0>; - #address-cells = <1>; #size-cells = <0>; @@ -1165,11 +1174,16 @@ reg = <0>; remote-endpoint = <&vopb_out_lvds>; }; + lvds_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_lvds>; }; }; + + lvds_out: port@1 { + reg = <1>; + }; }; }; @@ -1190,19 +1204,26 @@ ports { #address-cells = <1>; #size-cells = <0>; + edp_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; + edp_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_edp>; }; + edp_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_edp>; }; }; + + edp_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 12e90a1cc6a1..1a9e4a96b2ff 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -566,7 +566,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 8142c017882c..4d741adc16cd 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -210,8 +210,8 @@ * As we're dealing with 3wire SPI, we only define SCK * and MOSI (in the spec MOSI is called "SDA"). */ - gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; num-chipselects = <1>; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index b2dce3a29f39..27e0c3826789 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -258,4 +258,133 @@ bias-disable; }; }; + + uart4_idle_pins_a: uart4-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_a: uart4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_idle_pins_a: uart8-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_sleep_pins_a: uart8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ + <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */ + }; + }; + + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */ + <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */ + bias-pull-up; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */ + <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */ + }; + }; + + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 5949473cbbfd..d163c267e34c 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -397,12 +397,42 @@ status = "disabled"; }; + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART3_K>; + resets = <&rcc USART3_R>; + wakeup-source; + dmas = <&dmamux1 45 0x400 0x5>, + <&dmamux1 46 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; resets = <&rcc UART4_R>; + wakeup-source; + dmas = <&dmamux1 63 0x400 0x5>, + <&dmamux1 64 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART5_K>; + resets = <&rcc UART5_R>; + wakeup-source; + dmas = <&dmamux1 65 0x400 0x5>, + <&dmamux1 66 0x400 0x1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -442,6 +472,32 @@ status = "disabled"; }; + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART7_K>; + resets = <&rcc UART7_R>; + wakeup-source; + dmas = <&dmamux1 79 0x400 0x5>, + <&dmamux1 80 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART8_K>; + resets = <&rcc UART8_R>; + wakeup-source; + dmas = <&dmamux1 81 0x400 0x5>, + <&dmamux1 82 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers1: timer@44000000 { #address-cells = <1>; #size-cells = <0>; @@ -524,6 +580,19 @@ }; }; + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART6_K>; + resets = <&rcc USART6_R>; + wakeup-source; + dmas = <&dmamux1 71 0x400 0x5>, + <&dmamux1 72 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s1: audio-controller@44004000 { compatible = "st,stm32h7-i2s"; reg = <0x44004000 0x400>; @@ -748,6 +817,32 @@ status = "disabled"; }; + usart1: serial@4c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c000000 0x400>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + resets = <&rcc USART1_R>; + wakeup-source; + dmas = <&dmamux1 41 0x400 0x5>, + <&dmamux1 42 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s4: audio-controller@4c002000 { compatible = "st,stm32h7-i2s"; reg = <0x4c002000 0x400>; @@ -1137,6 +1232,54 @@ dma-requests = <48>; }; + fmc: memory-controller@58002000 { + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + #address-cells = <2>; + #size-cells = <1>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + status = "disabled"; + + nand-controller@4,0 { + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>, + <&mdma 24 0x2 0x12000a08 0x0 0x0>, + <&mdma 25 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; + }; + + qspi: spi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>, + <&mdma 26 0x2 0x10100008 0x0 0x0>; + dma-names = "tx", "rx"; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + status = "disabled"; + }; + sdmmc1: mmc@58005000 { compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x20253180>; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index c40686cb2b9a..f0900ca672b5 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -19,6 +19,13 @@ aliases { serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { @@ -267,8 +274,41 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart8_pins_a>; + pinctrl-1 = <&uart8_sleep_pins_a>; + pinctrl-2 = <&uart8_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + pinctrl-2 = <&usart2_idle_pins_a>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index a9d2bec99014..e86d989dd351 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1880,6 +1880,21 @@ }; }; + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + spi2_pins_a: spi2-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ @@ -2163,7 +2178,7 @@ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins2 { pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */ @@ -2181,7 +2196,7 @@ pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ @@ -2448,19 +2463,4 @@ bias-disable; }; }; - - spi1_pins_b: spi1-1 { - pins1 { - pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 4c8be9c8eb20..0da3667ab1e0 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -17,9 +17,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 2bc92ef3aeb9..ab13e340f4ef 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -18,9 +18,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; serial3 = &usart2; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index b1eb688a278a..8beb901be506 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -16,6 +16,10 @@ model = "STMicroelectronics STM32MP157C eval daughter"; compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + aliases { + serial0 = &uart4; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -65,15 +69,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@e8000000 { - reg = <0xe8000000 0x8000000>; - no-map; - }; - }; - - aliases { - serial0 = &uart4; }; sd_switch: regulator-sd_switch { @@ -140,10 +135,6 @@ status = "okay"; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 7d11c50b9e40..b01470a9a3d5 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -68,11 +68,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@dc000000 { - reg = <0xdc000000 0x4000000>; - no-map; - }; }; led: gpio_leds { @@ -183,10 +178,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 542226cfcfdf..ba8e9d9a42fa 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -14,16 +14,15 @@ model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; - chosen { - stdout-path = "serial0:115200n8"; - }; - aliases { - serial0 = &uart4; serial1 = &usart3; ethernet0 = ðernet0; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + clocks { clk_ext_camera: clk-ext-camera { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index cb00ce7cec8b..407ed3952f75 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -73,7 +73,7 @@ }; panel: panel { - compatible = "edt,etm0700g0edh6", "simple-panel"; + compatible = "edt,etm0700g0edh6"; backlight = <&backlight>; enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi index 2d9461006810..e22871dc580c 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -62,11 +62,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -80,11 +75,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 11370ae0d868..cefeeb00fc22 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -8,6 +8,12 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -53,11 +59,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -151,10 +152,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 935b7084b5a2..a43965c86fe8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -210,8 +210,8 @@ &m4_rproc { memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 6cdadba6a3ac..5cce4918f84c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -822,7 +822,7 @@ clocks = <&ccu CLK_APB2_UART0>; resets = <&ccu RST_APB2_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -835,7 +835,7 @@ clocks = <&ccu CLK_APB2_UART1>; resets = <&ccu RST_APB2_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -848,7 +848,7 @@ clocks = <&ccu CLK_APB2_UART2>; resets = <&ccu RST_APB2_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -861,7 +861,7 @@ clocks = <&ccu CLK_APB2_UART3>; resets = <&ccu RST_APB2_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -874,7 +874,7 @@ clocks = <&ccu CLK_APB2_UART4>; resets = <&ccu RST_APB2_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -887,7 +887,7 @@ clocks = <&ccu CLK_APB2_UART5>; resets = <&ccu RST_APB2_UART5>; dmas = <&dma 22>, <&dma 22>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index f630ab55bb6a..4aa9d88c9ea3 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -490,7 +490,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -503,7 +503,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -516,7 +516,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -529,7 +529,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -542,7 +542,7 @@ clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts new file mode 100644 index 000000000000..94e24b5926dd --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; + +#include "sun8i-t113s.dtsi" +#include "sunxi-d1s-t113-mangopi-mq-r.dtsi" + +/ { + model = "MangoPi MQ-R-T113"; + compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s"; + + aliases { + ethernet0 = &rtl8189ftv; + }; +}; + +&cpu0 { + cpu-supply = <®_vcc_core>; +}; + +&cpu1 { + cpu-supply = <®_vcc_core>; +}; + +&mmc1 { + rtl8189ftv: wifi@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */ + interrupt-names = "host-wake"; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-t113s.dtsi b/arch/arm/boot/dts/sun8i-t113s.dtsi new file mode 100644 index 000000000000..804aa197a24f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <riscv/allwinner/sunxi-d1s-t113.dtsi> +#include <riscv/allwinner/sunxi-d1-t113.dtsi> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index db194c606fdc..b001251644f7 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -479,7 +479,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -492,7 +492,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -505,7 +505,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART2>; pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index 04e59b8381cb..43896723a994 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; @@ -50,8 +52,22 @@ }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 9455d27e516e..3c61d59ab5f8 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -133,6 +133,32 @@ #size-cells = <0>; }; + usb_otg: usb@1c13000 { + compatible = "allwinner,suniv-f1c100s-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <26>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -181,6 +207,12 @@ pins = "PE0", "PE1"; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA2", "PA3"; + function = "uart1"; + }; }; i2c0: i2c@1c27000 { diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts new file mode 100644 index 000000000000..2d2a3f026df3 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Arm Ltd, + * based on work: + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Lctech Pi F1C200s"; + compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", + "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pa_pins>; + status = "okay"; +}; + +/* + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected + * to Vin, which supplies the board. Host mode works (if the board is powered + * otherwise), but peripheral is probably the intention. + */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts new file mode 100644 index 000000000000..184c245041a6 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Popcorn Computer PopStick v1.1"; + compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick", + "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */ + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi new file mode 100644 index 000000000000..e9bc749488bb --- /dev/null +++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. +/* + * Common peripherals and configurations for MangoPi MQ-R boards. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */ + }; + }; + + /* board wide 5V supply directly from the USB-C socket */ + reg_vcc5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* SY8008 DC/DC regulator on the board */ + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + }; + + /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */ + reg_vcc_core: regulator-core { + compatible = "regulator-fixed"; + regulator-name = "vcc-core"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + vin-supply = <®_vcc5v>; + }; + + /* XC6206 LDO on the board */ + reg_avdd2v8: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_3v3>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ + }; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_3v3>; + vcc-pd-supply = <®_3v3>; + vcc-pe-supply = <®_avdd2v8>; + vcc-pf-supply = <®_3v3>; + vcc-pg-supply = <®_3v3>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pb_pins>; + status = "okay"; +}; + +/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 686193bd6bd9..ade1cd50e445 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -710,7 +710,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -723,7 +723,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -736,7 +736,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -749,7 +749,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts index 7b2969656ec9..c2a9c3fb5b33 100644 --- a/arch/arm/boot/dts/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts @@ -520,10 +520,10 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ - 0x00000400 /* Mic bias current detect */ + 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ >; @@ -577,9 +577,9 @@ vdd-supply = <&vdd_1v8_sys>; vddio-supply = <&vdd_1v8_sys>; - mount-matrix = "1", "0", "0", - "0", "1", "0", - "0", "0", "1"; + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; }; }; }; @@ -1184,15 +1184,16 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; + "IN2L", "Mic Jack", + "DMICDAT", "Int Mic"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,headset; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/tegra30-asus-tf201.dts index 3c2b9e93e028..0406c5a69c12 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf201.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf201.dts @@ -624,4 +624,21 @@ /delete-node/ opp-800000000-1300; /delete-node/ opp-900000000-1350; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf201", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Prime TF201 RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/tegra30-asus-tf300t.dts index 506ae3626731..970a1f08dc8c 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300t.dts @@ -128,8 +128,8 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ @@ -1023,12 +1023,10 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "IN1L", "Mic Jack", "IN2L", "Mic Jack", "DMICDAT", "Int Mic"; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,headset; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts index 573deeafb7ba..4861db8e1e59 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts @@ -1084,4 +1084,21 @@ /delete-node/ opp-800000000; /delete-node/ opp-900000000; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf300tg", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Pad TF300TG RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts index e7fe8c7a7435..efde7dad718a 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts @@ -820,4 +820,21 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf700t", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Infinity TF700T RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi index 1861b2de2dc3..bdb898ad6262 100644 --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi @@ -558,7 +558,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_cs1_n_pw2 { + hp_detect { nvidia,pins = "spi2_cs1_n_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -566,10 +566,10 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_sck_px2 { + mic_detect { nvidia,pins = "spi2_sck_px2"; nvidia,function = "spi2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1674,7 +1674,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index d100a1a8b705..a2d557155114 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -210,6 +210,20 @@ opp-suspend; }; + opp-266500000-1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp-266500000-1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + opp-333500000-1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <333500000>; @@ -424,6 +438,12 @@ opp-suspend; }; + opp-266500000 { + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <2132000>; + }; + opp-333500000 { opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x000F>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b6fcac6016e0..9cba67b54111 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1283,10 +1283,7 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&{/cpus/cpu@0}>, - <&{/cpus/cpu@1}>, - <&{/cpus/cpu@2}>, - <&{/cpus/cpu@3}>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; thermal-zones { |