diff options
author | Arnd Bergmann <arnd@arndb.de> | 2017-10-30 14:02:31 +0300 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2017-10-30 14:02:31 +0300 |
commit | 6ac5482ee67d7b959eeae081e2b514d125598113 (patch) | |
tree | a9413186a9e8f102b85719326ea270fb9a59489f /arch/arm/boot | |
parent | c0dec1ec33d74ac7b07caf32506a84495e0a062f (diff) | |
parent | b6d3b649441936621c87b79bff8dd436e2397e3c (diff) | |
download | linux-6ac5482ee67d7b959eeae081e2b514d125598113.tar.xz |
Merge tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:
* r8a77430 (RZ/G1M) SoC
- Add XHCI support to SoC DT. Boards may enable this as appropriate
* All Renesas ARM based SoCs
- Add missing clocks for ARM CPU cores
Geert Uytterhoeven says "This series improves DT hardware descriptions
for Renesas arm32 SoCs by adding missing clocks properties to the
device nodes corresponding to ARM CPU cores."
* R-Car Gen 1 and 2, and RZ/G SoCs
- Use R-Car Fallback compat strings for GPIO
Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
compat strings in peace of now deprecated non-generation specific R-Car
GPIO fallback compat string in the DT of Renesas ARM and arm64 based
SoCs.
As noted in the changelogs for the r8a777[89] changes, this introduces
an incompatibility with pre-v4.14 kernels used with new DTBs. There is
no run-time effect for other SoCs updated by this changeset."
* r7s72100 (RZ/A1H) GR-Peach board
- Add pin configuration subnode for ETHER pin group.
This avoids relying on boot-loader configuration of these pins.
- Enable ostm0 and ostm1 timers
Jacopo Mondi says these are "to be used as clock source and clockevent
source. The timers provides greater accuracy than the already enabled
mtu2 one."
- Correct leds node name indent
- Enable MTU2 timer pulse unit
Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is
not enabled for GR-Peach board. The timer is used as clock event source
to schedule wake-ups, and without this enabled all sleeps not performed
through busy waiting hang the board."
* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
- Add USB function support
* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
- Add USB2.0 Host support
* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
- Rework DT architecture and add DT for camera DB
Fabrizio Castro says "Some of the serial interfaces are exposed on the
camera daughter board. The camera daughter board can be connected to
the carrier board by means of expansion connectors 1, 2 and 3. The
carrier board may host an RZ/G1M or an RZ/G1N based SoM.
While adding support for the serial interfaces on the camera daughter
board we faced the dilemma of how to properly describe all of the
possible HW configurations and how to maximize code reuse.
The best option would be to use device tree overlays, however there is
still some work to be done on that front before actually using them,
therefore for the time being we decided to provide .dtsi files to
describe the carrier board and the camera daughter board, and provide
.dts files to describe the HW configurations we need to support."
* r8a779[0-4] R-Car Gen2 SoCs
- Use generic node name for VSP1 nodes
Geert Uytterhoeven says "This patch series replaces the specific node
names used for the VSP1 nodes by the preferred generic node names, cfr.
commit 0e1bfb72b076b07d ("v4l: vsp1: Use generic node name")."
* tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (42 commits)
ARM: dts: r8a7743: Add xhci support to SoC dtsi
ARM: dts: r7s72100: Add clock for CA9 CPU core
dt-bindings: clk: r7s72100: Add missing I and G clocks
ARM: dts: sh73a0: Add clocks for CA9 CPU cores
ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core
ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core
ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core
ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core
ARM: dts: r8a7790: Add clocks for CA7 CPU cores
ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores
ARM: dts: r8a7779: Add clocks for CA9 CPU cores
ARM: dts: r8a7778: Add clock for CA9 CPU core
ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core
ARM: dts: r8a73a4: Add clock for CA15 CPU0 core
ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string
ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string
ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string
ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string
ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string
ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string
...
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/iwg20d-q7-common.dtsi | 152 | ||||
-rw-r--r-- | arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 43 | ||||
-rw-r--r-- | arch/arm/boot/dts/r7s72100-gr-peach.dts | 53 | ||||
-rw-r--r-- | arch/arm/boot/dts/r7s72100.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a73a4.dtsi | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 19 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 139 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7743.dtsi | 82 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 15 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7745.dtsi | 92 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7778.dtsi | 11 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7779.dtsi | 18 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7790.dtsi | 35 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7791.dtsi | 23 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7792.dtsi | 31 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7793.dtsi | 17 | ||||
-rw-r--r-- | arch/arm/boot/dts/r8a7794.dtsi | 19 | ||||
-rw-r--r-- | arch/arm/boot/dts/sh73a0.dtsi | 2 |
19 files changed, 543 insertions, 211 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b53d1a5104d3..cffb7f686996 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -727,6 +727,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-iwg20d-q7.dtb \ + r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ r8a7745-iwg22d-sodimm.dtb \ r8a7745-sk-rzg1e.dtb \ diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi new file mode 100644 index 000000000000..efd8af9242d1 --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -0,0 +1,152 @@ +/* + * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data_d"; + function = "scif0"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi new file mode 100644 index 000000000000..31fab5f183a9 --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -0,0 +1,43 @@ +/* + * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial1 = &scif1; + serial4 = &hscif1; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&pfc { + hscif1_pins: hscif1 { + groups = "hscif1_data_c", "hscif1_ctrl_c"; + function = "hscif1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_d"; + function = "scif1"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index 13d745bb56a5..779f724b4531 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -53,7 +53,7 @@ }; }; -leds { + leds { status = "okay"; compatible = "gpio-leds"; @@ -68,6 +68,28 @@ leds { /* P6_2 as RxD2; P6_3 as TxD2 */ pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>; }; + + ether_pins: ether { + /* Ethernet on Ports 1,3,5,10 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */ + <RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */ + <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */ + <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */ + <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */ + <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */ + <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */ + <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */ + <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */ + <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */ + <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */ + <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */ + }; }; &extal_clk { @@ -78,9 +100,38 @@ leds { clock-frequency = <48000000>; }; +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { pinctrl-names = "default"; pinctrl-0 = <&scif2_pins>; status = "okay"; }; + +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + + status = "okay"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + + phy0: ethernet-phy@0 { + reg = <0>; + + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <5>; + }; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 4ed12a4d9d51..ab9645a42eca 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -203,6 +203,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <400000000>; + clocks = <&cpg_clocks R7S72100_CLK_I>; next-level-cache = <&L2>; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 310222634570..dd4d09712a2a 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -27,6 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; clock-frequency = <1500000000>; power-domains = <&pd_a2sl>; next-level-cache = <&L2_CA15>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 000000000000..d90eb8464222 --- /dev/null +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,19 @@ +/* + * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 0136864bc595..6aa6b7467704 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the iWave-RZG1M Qseven carrier board + * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. * @@ -10,144 +10,9 @@ /dts-v1/; #include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" / { model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; - - aliases { - serial0 = &scif0; - ethernet0 = &avb; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; -}; - -&pfc { - i2c2_pins: i2c2 { - groups = "i2c2"; - function = "i2c2"; - }; - - scif0_pins: scif0 { - groups = "scif0_data_d"; - function = "scif0"; - }; - - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - micrel,led-mode = <1>; - }; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - status = "okay"; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - rtc@68 { - compatible = "ti,bq32000"; - reg = <0x68>; - }; -}; - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&usbphy { - status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index d541fd9ffafb..7bbba4a36f31 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -63,6 +63,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -108,7 +109,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -123,7 +124,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -138,7 +139,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -153,7 +154,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -168,7 +169,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -183,7 +184,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -198,7 +199,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -213,7 +214,7 @@ gpio7: gpio@e6055800 { compatible = "renesas,gpio-r8a7743", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -355,6 +356,34 @@ dma-channels = <15>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + /* The memory map in the User's Manual maps the cores to bus * numbers */ @@ -903,6 +932,26 @@ status = "disabled"; }; + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7743", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7743"; reg = <0 0xee100000 0 0x328>; @@ -945,6 +994,23 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7743", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy: usb-phy@e6590100 { compatible = "renesas,usb-phy-r8a7743", "renesas,rcar-gen2-usb-phy"; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 8772c561e3a8..52153ec3638c 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -55,6 +55,11 @@ function = "sdhi0"; power-source = <3300>; }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; }; &scif4 { @@ -92,3 +97,13 @@ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 6ba3b8b04edb..3a50f703601c 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -845,6 +845,98 @@ resets = <&cpg 311>; status = "disabled"; }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7745", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; }; /* External root clock */ diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 8f3156c0e575..a39472aab867 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -33,6 +33,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <800000000>; + clocks = <&z_clk>; }; }; @@ -88,7 +89,7 @@ }; gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -99,7 +100,7 @@ }; gpio1: gpio@ffc41000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc41000 0x2c>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -110,7 +111,7 @@ }; gpio2: gpio@ffc42000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc42000 0x2c>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -121,7 +122,7 @@ }; gpio3: gpio@ffc43000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc43000 0x2c>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -132,7 +133,7 @@ }; gpio4: gpio@ffc44000 { - compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio"; reg = <0xffc44000 0x2c>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 8ee0b2ca5d39..e8eb94748b27 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -29,12 +29,14 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM1>; }; cpu@2 { @@ -42,6 +44,7 @@ compatible = "arm,cortex-a9"; reg = <2>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM2>; }; cpu@3 { @@ -49,6 +52,7 @@ compatible = "arm,cortex-a9"; reg = <3>; clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; power-domains = <&sysc R8A7779_PD_ARM3>; }; }; @@ -76,7 +80,7 @@ }; gpio0: gpio@ffc40000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc40000 0x2c>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -87,7 +91,7 @@ }; gpio1: gpio@ffc41000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc41000 0x2c>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -98,7 +102,7 @@ }; gpio2: gpio@ffc42000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc42000 0x2c>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -109,7 +113,7 @@ }; gpio3: gpio@ffc43000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc43000 0x2c>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -120,7 +124,7 @@ }; gpio4: gpio@ffc44000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc44000 0x2c>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -131,7 +135,7 @@ }; gpio5: gpio@ffc45000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc45000 0x2c>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -142,7 +146,7 @@ }; gpio6: gpio@ffc46000 { - compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; reg = <0xffc46000 0x2c>; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 081cf5cdb13b..2f017fee4009 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -56,6 +56,7 @@ clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -71,8 +72,10 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -80,8 +83,10 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu3: cpu@3 { @@ -89,8 +94,10 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; + capacity-dmips-mhz = <1024>; }; cpu4: cpu@100 { @@ -98,8 +105,10 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu5: cpu@101 { @@ -107,8 +116,10 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu6: cpu@102 { @@ -116,8 +127,10 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU2>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; cpu7: cpu@103 { @@ -125,8 +138,10 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>; power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; + capacity-dmips-mhz = <539>; }; L2_CA15: cache-controller-0 { @@ -192,7 +207,7 @@ }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -206,7 +221,7 @@ }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -220,7 +235,7 @@ }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -234,7 +249,7 @@ }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -248,7 +263,7 @@ }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -262,7 +277,7 @@ }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -1014,7 +1029,7 @@ status = "disabled"; }; - vsp1@fe920000 { + vsp@fe920000 { compatible = "renesas,vsp1"; reg = <0 0xfe920000 0 0x8000>; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; @@ -1023,7 +1038,7 @@ resets = <&cpg 130>; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; @@ -1032,7 +1047,7 @@ resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; @@ -1041,7 +1056,7 @@ resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 5a8a15847076..67831d0405f3 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -70,6 +70,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -124,7 +125,7 @@ }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -138,7 +139,7 @@ }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -152,7 +153,7 @@ }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -166,7 +167,7 @@ }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -180,7 +181,7 @@ }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -194,7 +195,7 @@ }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -208,7 +209,7 @@ }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -222,7 +223,7 @@ }; gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -1073,7 +1074,7 @@ status = "disabled"; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; @@ -1082,7 +1083,7 @@ resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; @@ -1091,7 +1092,7 @@ resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index c332f77ebb6b..131f65b0426e 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -56,6 +56,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7792_CLK_Z>; power-domains = <&sysc R8A7792_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -147,7 +148,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -162,7 +163,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -177,7 +178,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -192,7 +193,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -207,7 +208,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -222,7 +223,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -237,7 +238,7 @@ gpio6: gpio@e6055100 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055100 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -252,7 +253,7 @@ gpio7: gpio@e6055200 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055200 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -267,7 +268,7 @@ gpio8: gpio@e6055300 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055300 0 0x50>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -282,7 +283,7 @@ gpio9: gpio@e6055400 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -297,7 +298,7 @@ gpio10: gpio@e6055500 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055500 0 0x50>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -312,7 +313,7 @@ gpio11: gpio@e6055600 { compatible = "renesas,gpio-r8a7792", - "renesas,gpio-rcar"; + "renesas,rcar-gen2-gpio"; reg = <0 0xe6055600 0 0x50>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -794,7 +795,7 @@ status = "disabled"; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; @@ -803,7 +804,7 @@ resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; @@ -812,7 +813,7 @@ resets = <&cpg 128>; }; - vsp1@fe938000 { + vsp@fe938000 { compatible = "renesas,vsp1"; reg = <0 0xfe938000 0 0x8000>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index aa19b93494bf..58eae569b4e0 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -62,6 +62,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; }; @@ -115,7 +116,7 @@ }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -129,7 +130,7 @@ }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -143,7 +144,7 @@ }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -157,7 +158,7 @@ }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -171,7 +172,7 @@ }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -185,7 +186,7 @@ }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -199,7 +200,7 @@ }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -213,7 +214,7 @@ }; gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 035c33715b65..905e50c9b524 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -53,6 +53,7 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>; power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; @@ -82,7 +83,7 @@ }; gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -96,7 +97,7 @@ }; gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -110,7 +111,7 @@ }; gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -124,7 +125,7 @@ }; gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -138,7 +139,7 @@ }; gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -152,7 +153,7 @@ }; gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -166,7 +167,7 @@ }; gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -970,7 +971,7 @@ }; }; - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; @@ -979,7 +980,7 @@ resets = <&cpg 131>; }; - vsp1@fe930000 { + vsp@fe930000 { compatible = "renesas,vsp1"; reg = <0 0xfe930000 0 0x8000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 4ea5c5a16c57..88d7e5631d34 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -27,6 +27,7 @@ compatible = "arm,cortex-a9"; reg = <0>; clock-frequency = <1196000000>; + clocks = <&cpg_clocks SH73A0_CLK_Z>; power-domains = <&pd_a2sl>; next-level-cache = <&L2>; }; @@ -35,6 +36,7 @@ compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1196000000>; + clocks = <&cpg_clocks SH73A0_CLK_Z>; power-domains = <&pd_a2sl>; next-level-cache = <&L2>; }; |