Merge tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.

* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rk3288-based Tinker board S
  ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
  ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
  ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
  ARM: dts: rockchip: add rk3188 lcd controller nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 622 insertions, 497 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 058a09e08a56..b0e966d625b9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -870,6 +870,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-r89.dtb \
 	rk3288-rock2-square.dtb \
 	rk3288-tinker.dtb \
+	rk3288-tinker-s.dtb \
 	rk3288-veyron-brain.dtb \
 	rk3288-veyron-jaq.dtb \
 	rk3288-veyron-jerry.dtb \
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 67f57200d9a0..d560fc4051c5 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -733,7 +733,7 @@
 			/* no rts / cts for uart2 */
 		};
 
-		spi {
+		spi-pins {
 			spi_txd:spi-txd {
 				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 			};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 45fd2b302dda..4a2890618f6f 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -93,6 +93,8 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
 		startup-delay-us = <100000>;
 		vin-supply = <&vcc_io>;
 	};
@@ -315,6 +317,12 @@
 		};
 	};
 
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index aa123f93f181..b6f790973736 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -56,6 +56,11 @@
 		};
 	};
 
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop0_out>, <&vop1_out>;
+	};
+
 	sram: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x8000>;
@@ -69,6 +74,38 @@
 		};
 	};
 
+	vop0: vop@1010c000 {
+		compatible = "rockchip,rk3188-vop";
+		reg = <0x1010c000 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop0_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	vop1: vop@1010e000 {
+		compatible = "rockchip,rk3188-vop";
+		reg = <0x1010e000 0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop1_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	timer3: timer@2000e000 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
@@ -309,6 +346,51 @@
 			};
 		};
 
+		lcdc1 {
+			lcdc1_dclk: lcdc1-dclk {
+				rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_den: lcdc1-den {
+				rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_hsync: lcdc1-hsync {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_vsync: lcdc1-vsync {
+				rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			lcdc1_rgb24: ldcd1-rgb24 {
+				rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
+						<2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		pwm0 {
 			pwm0_out: pwm0-out {
 				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
new file mode 100644
index 000000000000..37093922b482
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Asus Tinker Board S";
+	compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	max-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index ceade5962899..1e43527aa196 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -5,503 +5,9 @@
 
 /dts-v1/;
 
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
 
 / {
-	model = "Rockchip RK3288 Tinker Board";
+	model = "Rockchip RK3288 Asus Tinker Board";
 	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	memory {
-		reg = <0x0 0x0 0x0 0x80000000>;
-		device_type = "memory";
-	};
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		button@0 {
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			wakeup-source;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		act-led {
-			gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger="mmc0";
-		};
-
-		heartbeat-led {
-			gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger="heartbeat";
-		};
-
-		pwr-led {
-			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,name = "rockchip,tinker-codec";
-		simple-audio-card,mclk-fs = <512>;
-
-		simple-audio-card,codec {
-			sound-dai = <&hdmi>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s>;
-		};
-	};
-
-	vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	clock_in_out = "input";
-	phy-mode = "rgmii";
-	phy-supply = <&vcc33_lan>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio4 7 0>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "ok";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c5>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
-				<&gpio0 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc_sys>;
-		vcc8-supply = <&vcc_io>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc11-supply = <&vcc_sys>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vcc_io>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "vdd_arm";
-				regulator-ramp-delay = <6000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-				regulator-ramp-delay = <6000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc18_ldo1: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_ldo1";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc33_mipi: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc33_mipi";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc18_codec: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_codec";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc18_lcd: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc33_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc33_sd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc33_lan: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc33_lan";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2s {
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
-	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
-		drive-strength = <8>;
-	};
-
-	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
-		bias-pull-up;
-		drive-strength = <8>;
-	};
-
-	backlight {
-		bl_en: bl-en {
-			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	eth_phy {
-		eth_phy_pwr: eth-phy-pwr {
-			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int: pmic-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
-					&pcfg_pull_up>;
-		};
-
-		dvs_1: dvs-1 {
-			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
-					&pcfg_pull_down>;
-		};
-
-		dvs_2: dvs-2 {
-			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
-					&pcfg_pull_down>;
-		};
-	};
-
-	sdmmc {
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <6 20 RK_FUNC_1 \
-					&pcfg_pull_none_drv_8ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
-		};
-
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pwr_3g: pwr-3g {
-			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcc18_ldo1>;
-	status ="okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	disable-wp;			/* wp not hooked up */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	status = "okay";
-	vmmc-supply = <&vcc33_sd>;
-	vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host1 {
-	status = "okay";
-};
-
-&usb_otg {
-	status= "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
new file mode 100644
index 000000000000..aa107ee41b8b
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		act-led {
+			gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="mmc0";
+		};
+
+		heartbeat-led {
+			gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="heartbeat";
+		};
+
+		pwr-led {
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,tinker-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc33_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+				<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc18_ldo1: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_ldo1";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_mipi: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_codec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc33_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+					&pcfg_pull_up>;
+		};
+
+		dvs_1: dvs-1 {
+			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+					&pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+					&pcfg_pull_down>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 \
+					&pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pwr_3g: pwr-3g {
+			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc18_ldo1>;
+	status ="okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status= "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};