Merge tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Second set of devicetree changes for omaps for v4.12 merge window
to configure various devices:

- Enable DCAN on am57xx-idk

- Enable CPSW ethernet0 and 1 on am335x-icev2

- Non-critical fix for droid 4 PMIC interrupt triggering

- Stop disabling SRAM and GPMC on droid 4

- Configure CPCAP PMIC related devices on droid 4 for ADC, charger
  and USB PHY. The charger and USB PHY drivers are still being
  discussed, but the binding for them has been acked by Rob and
  Sebastian so they should be safe to merge together with the ADC
  driver in Linux next that they depend on

* tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
  ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration
  ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration
  ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC
  ARM: dts: omap4-droid4: Fix interrupt triggering for cpcap
  ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1
  ARM: dts: am57xx-idk: Add DCAN support

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 196 insertions, 13 deletions

diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 1e643dcf63ec..f2005ecca74f 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -201,6 +201,69 @@
 			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
 		>;
 	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1, RMII mode */
+			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0))	/* rmii1_refclk.rmii1_refclk */
+			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txen.rmii1_txen */
+			/* Slave 2, RMII mode */
+			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wait0.rmii2_crs_dv */
+			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_col.rmii2_refclk */
+			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a11.rmii2_rxd0 */
+			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a10.rmii2_rxd1 */
+			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wpn.rmii2_rxerr */
+			AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a5.rmii2_txd0 */
+			AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a4.rmii2_txd1 */
+			AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a0.rmii2_txen */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+
+			/* Slave 2 reset value */
+			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0))	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0))			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+			AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
+		>;
+	};
 };
 
 &i2c0 {
@@ -383,3 +446,61 @@
 	pinctrl-0 = <&uart3_pins_default>;
 	status = "okay";
 };
+
+&gpio3 {
+	p4 {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PR1_MII_CTRL";
+	};
+
+	p10 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+		output-high;
+		line-name = "MUX_MII_CTL1";
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	dual_emac;
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 0d341c545b01..22cdaabc4a86 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -101,6 +101,22 @@
 	};
 };
 
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
+		>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -391,6 +407,14 @@
 	max-frequency = <96000000>;
 };
 
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
 &qspi {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 49b76aa16e5f..f5aeb3959afd 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -11,7 +11,7 @@
 		compatible = "motorola,cpcap", "st,6556002";
 		reg = <0>;	/* cs0 */
 		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		#address-cells = <1>;
@@ -19,6 +19,32 @@
 		spi-max-frequency = <3000000>;
 		spi-cs-high;
 
+		cpcap_adc: adc {
+			compatible = "motorola,mapphone-cpcap-adc";
+			interrupts-extended = <&cpcap 8 0>;
+			interrupt-names = "adcdone";
+			#io-channel-cells = <1>;
+		};
+
+		cpcap_charger: charger {
+			compatible = "motorola,mapphone-cpcap-charger";
+			interrupts-extended = <
+				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+				&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+			>;
+			interrupt-names =
+				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+				"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+				      &gpio3 23 GPIO_ACTIVE_LOW>;
+			io-channels = <&cpcap_adc 0 &cpcap_adc 1
+				       &cpcap_adc 2 &cpcap_adc 5
+				       &cpcap_adc 6>;
+			io-channel-names = "battdetb", "battp",
+					   "vbus", "chg_isense",
+					   "batti";
+		};
+
 		cpcap_regulator: regulator {
 			compatible = "motorola,mapphone-cpcap-regulator";
 
@@ -39,6 +65,29 @@
 			interrupts = <23 IRQ_TYPE_NONE>;
 		};
 
+		cpcap_usb2_phy: phy {
+			compatible = "motorola,mapphone-cpcap-usb-phy";
+			pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+			pinctrl-1 = <&usb_ulpi_pins>;
+			pinctrl-2 = <&usb_utmi_pins>;
+			pinctrl-3 = <&uart3_pins>;
+			pinctrl-names = "default", "ulpi", "utmi", "uart";
+			#phy-cells = <0>;
+			interrupts-extended = <
+				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+				&cpcap 48 1
+			>;
+			interrupt-names =
+				"id_ground", "id_float", "se0conn", "vbusvld",
+				"sessvld", "sessend", "se1", "dm", "dp";
+			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+				      &gpio1 0 GPIO_ACTIVE_HIGH>;
+			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+			io-channel-names = "vbus", "id";
+			vusb-supply = <&vusb>;
+		};
+
 		led_red: led-red {
 			compatible = "motorola,cpcap-led-red";
 			vdd-supply = <&sw5>;
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index f27966e3cbc0..89eb607f4a9e 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -24,8 +24,7 @@
 
 	/*
 	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
-	 * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
-	 * below about SRAM and L3_ICLK2 being unused by default,
+	 * then 1023 - 1024 seems to contain mbm.
 	 */
 	memory {
 		device_type = "memory";
@@ -176,11 +175,6 @@
 	};
 };
 
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&gpmc {
-	status = "disabled";
-};
-
 &hdmi {
 	status = "okay";
 	pinctrl-0 = <&dss_hdmi_pins>;
@@ -356,11 +350,6 @@
 	};
 };
 
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&ocmcram {
-	status = "disabled";
-};
-
 &omap4_pmx_core {
 
 	/* hdmi_hpd.gpio_63 */