diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-03-01 07:59:34 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-03-01 07:59:34 +0400 |
| commit | f8f466c81795a3ed2b8a74c8feebc280aec3db81 (patch) | |
| tree | 5d5d7e2cc0fd46f2a865974adc8a86bbd8c2f3be /arch/arm/boot | |
| parent | 2af78448fff61e13392daf4f770cfbcf9253316a (diff) | |
| parent | 4a9226a3d192c38493106dcaf5f47f291ede9ed5 (diff) | |
| download | linux-f8f466c81795a3ed2b8a74c8feebc280aec3db81.tar.xz | |
Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC i.MX DT changes from Olof Johansson:
"This branch contains of devicetree changes for the Freescale i.MX
platform.
The base patch of the branch changes the format of the dts files to a
slightly different format that makes it easier to do derivative board
definitions, but it also introduces a lot of churn in the process
since every line of the file is touched.
On top of that are a handful of the regular changes; enabling more
boards as DT-based instead of legacy board files (mx25pdk), enabling
another driver for devicetree and thus adding bindings (onewire), etc.
I'm not happy about the churn, and will likely not take it for other
platforms in the future."
* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: dts: add dtsi for imx6q and imx6dl
ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
ARM: dts: i.MX6: Add regulator delay support
ARM: dts: Add device tree entry for onewire master on i.MX53
ARM: i.MX53: Add clocks for i.mx53 onewire master.
W1: Add device tree support to MXC onewire master.
ARM: imx: enable imx6q-cpufreq support
ARM: dts: Add apf51 basic support
ARM i.MX6: change mxs usbphy clock usage
ARM: dts: imx6q: Remove silicon version from SDMA firmware
ARM i.MX53: dts: add oftree for MBa53 baseboard
ARM i.MX53: add dts for the TQ tqma53 module
ARM: dts: imx53: pinctrl update
ARM i.MX51 babbage: Add keypad support
ARM: dts: imx: Add imx51 KPP entry
ARM: dts: imx25-karo-tx25: Put status entry in the end
ARM: mx25pdk: Add device tree support
ARM: dts: imx: use nodes label in board dts
ARM: dts: add missing imx dtb targets
ARM: boot: dts: Add an entry for imx27-pdk.dtb
...
Diffstat (limited to 'arch/arm/boot')
24 files changed, 2426 insertions, 1878 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 411ab1614a0e..e007134cc2ca 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -80,9 +80,17 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-xp-db.dtb \ armada-xp-openblocks-ax3-4.dtb -dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ +dtb-$(CONFIG_ARCH_MXC) += \ + imx25-karo-tx25.dtb \ + imx25-pdk.dtb \ + imx27-apf27.dtb \ + imx27-pdk.dtb \ + imx31-bug.dtb \ + imx51-apf51.dtb \ + imx51-babbage.dtb \ imx53-ard.dtb \ imx53-evk.dtb \ + imx53-mba53.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ imx6q-arm2.dtb \ diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index d81f8a0b9794..1a9d0491cdce 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -19,26 +19,18 @@ memory { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; +}; - soc { - aips@43f00000 { - uart1: serial@43f90000 { - status = "okay"; - }; - }; +&uart1 { + status = "okay"; +}; - spba@50000000 { - fec: ethernet@50038000 { - status = "okay"; - phy-mode = "rmii"; - }; - }; +&fec { + phy-mode = "rmii"; + status = "okay"; +}; - emi@80000000 { - nand@bb000000 { - nand-on-flash-bbt; - status = "okay"; - }; - }; - }; +&nfc { + nand-on-flash-bbt; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts new file mode 100644 index 000000000000..a02a860afd18 --- /dev/null +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -0,0 +1,36 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx25.dtsi" + +/ { + model = "Freescale i.MX25 Product Development Kit"; + compatible = "fsl,imx25-pdk", "fsl,imx25"; + + memory { + reg = <0x80000000 0x4000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&fec { + phy-mode = "rmii"; + status = "okay"; +}; + +&nfc { + nand-on-flash-bbt; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index e1b13ebc96d6..94f33059158a 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -499,7 +499,7 @@ reg = <0x80000000 0x3b002000>; ranges; - nand@bb000000 { + nfc: nand@bb000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index c0327c054de2..b464c807d8d9 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -32,58 +32,54 @@ clock-frequency = <0>; }; }; +}; - soc { - aipi@10000000 { - serial@1000a000 { - status = "okay"; - }; +&uart1 { + status = "okay"; +}; - ethernet@1002b000 { - status = "okay"; - }; - }; +&fec { + status = "okay"; +}; - nand@d8000000 { - status = "okay"; - nand-bus-width = <16>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; +&nfc { + status = "okay"; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; - partition@0 { - label = "u-boot"; - reg = <0x0 0x100000>; - }; + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; - partition@100000 { - label = "env"; - reg = <0x100000 0x80000>; - }; + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; - partition@180000 { - label = "env2"; - reg = <0x180000 0x80000>; - }; + partition@180000 { + label = "env2"; + reg = <0x180000 0x80000>; + }; - partition@200000 { - label = "firmware"; - reg = <0x200000 0x80000>; - }; + partition@200000 { + label = "firmware"; + reg = <0x200000 0x80000>; + }; - partition@280000 { - label = "dtb"; - reg = <0x280000 0x80000>; - }; + partition@280000 { + label = "dtb"; + reg = <0x280000 0x80000>; + }; - partition@300000 { - label = "kernel"; - reg = <0x300000 0x500000>; - }; + partition@300000 { + label = "kernel"; + reg = <0x300000 0x500000>; + }; - partition@800000 { - label = "rootfs"; - reg = <0x800000 0xf800000>; - }; - }; + partition@800000 { + label = "rootfs"; + reg = <0x800000 0xf800000>; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-pdk.dts index fa04c7b18bcb..41cd1105608e 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -13,25 +13,19 @@ /include/ "imx27.dtsi" / { - model = "mx27_3ds"; - compatible = "freescale,imx27-3ds", "fsl,imx27"; + model = "Freescale i.MX27 Product Development Kit"; + compatible = "fsl,imx27-pdk", "fsl,imx27"; memory { reg = <0x0 0x0>; }; +}; - soc { - aipi@10000000 { /* aipi1 */ - uart1: serial@1000a000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - }; +&uart1 { + fsl,uart-has-rtscts; + status = "okay"; +}; - aipi@10020000 { /* aipi2 */ - ethernet@1002b000 { - status = "okay"; - }; - }; - }; +&fec { + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 7f67402328d3..9ac6f6ba1d64 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -19,13 +19,9 @@ memory { reg = <0x80000000 0x8000000>; /* 128M */ }; +}; - soc { - aips@43f00000 { /* AIPS1 */ - uart5: serial@43fb4000 { - fsl,uart-has-rtscts; - status = "okay"; - }; - }; - }; +&uart5 { + fsl,uart-has-rtscts; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts new file mode 100644 index 000000000000..92d3a66a69e2 --- /dev/null +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * Copyright 2012 Laurent Cans <laurent.cans@gmail.com> + * + * Based on mx51-babbage.dts + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx51.dtsi" + +/ { + model = "Armadeus Systems APF51 module"; + compatible = "armadeus,imx51-apf51", "fsl,imx51"; + + memory { + reg = <0x90000000 0x20000000>; + }; + + clocks { + ckih1 { + clock-frequency = <0>; + }; + + osc { + clock-frequency = <33554432>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_2>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio3 0 0>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 567e7ee72f91..aab6e43219af 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -21,239 +21,20 @@ reg = <0x90000000 0x20000000>; }; - soc { - display@di0 { - compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1_1>; - }; - - display@di1 { - compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 1>; - interface-pix-fmt = "rgb565"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp2_1>; - }; - - aips@70000000 { /* aips-1 */ - spba@70000000 { - esdhc@70004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; - }; - - esdhc@70008000 { /* ESDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; - cd-gpios = <&gpio1 6 0>; - wp-gpios = <&gpio1 5 0>; - status = "okay"; - }; - - uart3: serial@7000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - ecspi@70010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; - status = "okay"; - - pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mc13892"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <8 0x4>; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1375000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - vpll_reg: vpll { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vdig_reg: vdig { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - }; - - vsd_reg: vsd { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3150000>; - }; - - vusb2_reg: vusb2 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; - }; - - vvideo_reg: vvideo { - regulator-min-microvolt = <2775000>; - regulator-max-microvolt = <2775000>; - }; - - vaudio_reg: vaudio { - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <3000000>; - }; - - vcam_reg: vcam { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3000000>; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - }; - }; - - flash: at45db321d@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - ssi2: ssi@70014000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - }; - - iomuxc@73fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ - 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ - 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ - 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ - 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ - 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ - 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ - >; - }; - }; - }; - - uart1: serial@73fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - uart2: serial@73fc0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; - }; - }; - - aips@80000000 { /* aips-2 */ - i2c@83fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clock-frequency = <26000000>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; - }; - }; - - audmux@83fd0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; - }; + display@di0 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1_1>; + }; - ethernet@83fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "mii"; - status = "okay"; - }; - }; + display@di1 { + compatible = "fsl,imx-parallel-display"; + crtcs = <&ipu 1>; + interface-pix-fmt = "rgb565"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp2_1>; }; gpio-keys { @@ -281,3 +62,236 @@ mux-ext-port = <3>; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 0>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; + status = "okay"; + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 0x4>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + }; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ + 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ + 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ + 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ + 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ + 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ + 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clock-frequency = <26000000>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "mii"; + status = "okay"; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp_1>; + linux,keymap = <0x00000067 /* KEY_UP */ + 0x0001006c /* KEY_DOWN */ + 0x00020072 /* KEY_VOLUMEDOWN */ + 0x00030066 /* KEY_HOME */ + 0x0100006a /* KEY_RIGHT */ + 0x01010069 /* KEY_LEFT */ + 0x0102001c /* KEY_ENTER */ + 0x01030073 /* KEY_VOLUMEUP */ + 0x02000040 /* KEY_F6 */ + 0x02010042 /* KEY_F8 */ + 0x02020043 /* KEY_F9 */ + 0x02030044 /* KEY_F10 */ + 0x0300003b /* KEY_F1 */ + 0x0301003c /* KEY_F2 */ + 0x0302003d /* KEY_F3 */ + 0x03030074>; /* KEY_POWER */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 1f5d45eff45e..fcf035bf7c5a 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -221,6 +221,14 @@ #interrupt-cells = <2>; }; + kpp: kpp@73f94000 { + compatible = "fsl,imx51-kpp", "fsl,imx21-kpp"; + reg = <0x73f94000 0x4000>; + interrupts = <60>; + clocks = <&clks 0>; + status = "disabled"; + }; + wdog1: wdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; @@ -273,6 +281,29 @@ 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ >; }; + + pinctrl_fec_2: fecgrp-2 { + fsl,pins = < + 589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */ + 592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */ + 594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */ + 596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */ + 598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */ + 602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */ + 604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */ + 609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */ + 618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */ + 623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */ + 628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */ + 634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */ + 639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */ + 644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */ + 649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */ + 653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */ + 657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */ + 662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */ + >; + }; }; ecspi1 { @@ -409,6 +440,28 @@ 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ >; }; + + pinctrl_uart3_2: uart3grp-2 { + fsl,pins = < + 434 0x1c5 /* MX51_PAD_UART3_RXD__UART3_RXD */ + 430 0x1c5 /* MX51_PAD_UART3_TXD__UART3_TXD */ + >; + }; + }; + + kpp { + pinctrl_kpp_1: kppgrp-1 { + fsl,pins = < + 438 0xe0 /* MX51_PAD_KEY_ROW0__KEY_ROW0 */ + 439 0xe0 /* MX51_PAD_KEY_ROW1__KEY_ROW1 */ + 440 0xe0 /* MX51_PAD_KEY_ROW2__KEY_ROW2 */ + 441 0xe0 /* MX51_PAD_KEY_ROW3__KEY_ROW3 */ + 442 0xe8 /* MX51_PAD_KEY_COL0__KEY_COL0 */ + 444 0xe8 /* MX51_PAD_KEY_COL1__KEY_COL1 */ + 446 0xe8 /* MX51_PAD_KEY_COL2__KEY_COL2 */ + 448 0xe8 /* MX51_PAD_KEY_COL3__KEY_COL3 */ + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 4be76f223526..e049fd0319e8 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -21,72 +21,6 @@ reg = <0x70000000 0x40000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_2>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ - 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ - 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ - 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ - 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ - 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ - 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ - 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ - 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ - 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ - 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ - 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ - 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ - 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ - 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ - 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ - 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ - 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ - 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ - 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ - 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ - 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ - 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ - 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ - 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ - 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ - 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ - 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ - 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ - 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ - 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ - 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ - 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ - 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ - >; - }; - }; - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; - }; - }; - }; - eim-cs1@f4000000 { #address-cells = <1>; #size-cells = <1>; @@ -162,3 +96,63 @@ }; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; + cd-gpios = <&gpio1 1 0>; + wp-gpios = <&gpio1 9 0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ + 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ + 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ + 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ + 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ + 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ + 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ + 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ + 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ + 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ + 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ + 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ + 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ + 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ + 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ + 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ + 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ + 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ + 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ + 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ + 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ + 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ + 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ + 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ + 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ + 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ + 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ + 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ + 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ + 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ + 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ + 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ + 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ + 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index a124d1e25258..85a89b52f9b8 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -21,107 +21,6 @@ reg = <0x70000000 0x80000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio3 14 0>; - status = "okay"; - }; - - ecspi@50010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; - status = "okay"; - - flash: at45db321d@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - esdhc@50020000 { /* ESDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc3_1>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ - >; - }; - }; - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - }; - - aips@60000000 { /* AIPS2 */ - i2c@63fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - pmic: mc13892@08 { - compatible = "fsl,mc13892", "fsl,mc13xxx"; - reg = <0x08>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - }; - }; - - ethernet@63fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; - status = "okay"; - }; - }; - }; - leds { compatible = "gpio-leds"; @@ -132,3 +31,96 @@ }; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio3 14 0>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + status = "okay"; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + pmic: mc13892@08 { + compatible = "fsl,mc13892", "fsl,mc13xxx"; + reg = <0x08>; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts new file mode 100644 index 000000000000..e54fffd48369 --- /dev/null +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -0,0 +1,130 @@ +/* + * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx53-tqma53.dtsi" + +/ { + model = "TQ MBa53 starter kit"; + compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; +}; + +&iomuxc { + lvds1 { + pinctrl_lvds1_1: lvds1-grp1 { + fsl,pins = <730 0x10000 /* LVDS0_TX3 */ + 732 0x10000 /* LVDS0_CLK */ + 734 0x10000 /* LVDS0_TX2 */ + 736 0x10000 /* LVDS0_TX1 */ + 738 0x10000>; /* LVDS0_TX0 */ + }; + + pinctrl_lvds1_2: lvds1-grp2 { + fsl,pins = <720 0x10000 /* LVDS1_TX3 */ + 722 0x10000 /* LVDS1_TX2 */ + 724 0x10000 /* LVDS1_CLK */ + 726 0x10000 /* LVDS1_TX1 */ + 728 0x10000>; /* LVDS1_TX0 */ + }; + }; + + disp1 { + pinctrl_disp1_1: disp1-grp1 { + fsl,pins = <689 0x10000 /* DISP1_DRDY */ + 482 0x10000 /* DISP1_HSYNC */ + 489 0x10000 /* DISP1_VSYNC */ + 684 0x10000 /* DISP1_DAT_0 */ + 515 0x10000 /* DISP1_DAT_22 */ + 523 0x10000 /* DISP1_DAT_23 */ + 543 0x10000 /* DISP1_DAT_21 */ + 553 0x10000 /* DISP1_DAT_20 */ + 558 0x10000 /* DISP1_DAT_19 */ + 564 0x10000 /* DISP1_DAT_18 */ + 570 0x10000 /* DISP1_DAT_17 */ + 575 0x10000 /* DISP1_DAT_16 */ + 580 0x10000 /* DISP1_DAT_15 */ + 585 0x10000 /* DISP1_DAT_14 */ + 590 0x10000 /* DISP1_DAT_13 */ + 595 0x10000 /* DISP1_DAT_12 */ + 628 0x10000 /* DISP1_DAT_11 */ + 634 0x10000 /* DISP1_DAT_10 */ + 639 0x10000 /* DISP1_DAT_9 */ + 644 0x10000 /* DISP1_DAT_8 */ + 649 0x10000 /* DISP1_DAT_7 */ + 654 0x10000 /* DISP1_DAT_6 */ + 659 0x10000 /* DISP1_DAT_5 */ + 664 0x10000 /* DISP1_DAT_4 */ + 669 0x10000 /* DISP1_DAT_3 */ + 674 0x10000 /* DISP1_DAT_2 */ + 679 0x10000 /* DISP1_DAT_1 */ + 684 0x10000>; /* DISP1_DAT_0 */ + }; + }; +}; + +&cspi { + status = "okay"; +}; + +&i2c2 { + codec: sgtl5000@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + expander: pca9554@20 { + compatible = "pca9554"; + reg = <0x20>; + interrupts = <109>; + }; + + sensor2: lm75@49 { + compatible = "lm75"; + reg = <0x49>; + }; +}; + +&fec { + status = "okay"; +}; + +&esdhc2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index b0075537195b..05cc5620436b 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -21,200 +21,6 @@ reg = <0x70000000 0x40000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; - status = "okay"; - }; - - ssi2: ssi@50014000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - - esdhc@50020000 { /* ESDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc3_1>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ - 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ - 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ - >; - }; - - led_pin_gpio7_7: led_gpio7_7@0 { - fsl,pins = < - 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ - >; - }; - }; - - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - }; - - aips@60000000 { /* AIPS2 */ - i2c@63fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - VDDA-supply = <®_3p2v>; - VDDIO-supply = <®_3p2v>; - }; - }; - - i2c@63fc8000 { /* I2C1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; - }; - - pmic: dialog@48 { - compatible = "dlg,da9053-aa", "dlg,da9052"; - reg = <0x48>; - interrupt-parent = <&gpio7>; - interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ - - regulators { - buck1_reg: buck1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - regulator-always-on; - }; - - buck2_reg: buck2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - regulator-always-on; - }; - - buck3_reg: buck3 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - buck4_reg: buck4 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - ldo1_reg: ldo1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: ldo4 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo6_reg: ldo6 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo7_reg: ldo7 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo8_reg: ldo8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-always-on; - }; - - ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; - regulator-always-on; - }; - }; - }; - }; - - audmux@63fd0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; - }; - - ethernet@63fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -276,3 +82,189 @@ mux-ext-port = <5>; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio3 13 0>; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ + 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + >; + }; + + led_pin_gpio7_7: led_gpio7_7@0 { + fsl,pins = < + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; + +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + pmic: dialog@48 { + compatible = "dlg,da9053-aa", "dlg,da9052"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ + + regulators { + buck1_reg: buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + buck4_reg: buck4 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo10_reg: ldo10 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + regulator-always-on; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 06c68580c842..995554c324b8 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -21,157 +21,6 @@ reg = <0x70000000 0x40000000>; }; - soc { - aips@50000000 { /* AIPS1 */ - spba@50000000 { - esdhc@50004000 { /* ESDHC1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1_1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; - status = "okay"; - }; - - esdhc@50008000 { /* ESDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2_1>; - non-removable; - status = "okay"; - }; - - uart3: serial@5000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - fsl,uart-has-rtscts; - status = "okay"; - }; - - ecspi@50010000 { /* ECSPI1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; - status = "okay"; - - zigbee: mc1323@0 { - compatible = "fsl,mc1323"; - spi-max-frequency = <8000000>; - reg = <0>; - }; - - flash: m25p32@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p32", "st,m25p"; - spi-max-frequency = <20000000>; - reg = <1>; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0x3c0000>; - }; - }; - }; - - esdhc@50020000 { /* ESDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc3_1>; - non-removable; - status = "okay"; - }; - }; - - iomuxc@53fa8000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ - 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ - 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ - 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ - 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ - 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ - 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ - >; - }; - }; - }; - - uart1: serial@53fbc000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - - uart2: serial@53fc0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; - }; - }; - - aips@60000000 { /* AIPS2 */ - i2c@63fc4000 { /* I2C2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - }; - - magnetometer: mag3110@0e { - compatible = "fsl,mag3110"; - reg = <0x0e>; - }; - - touchkey: mpr121@5a { - compatible = "fsl,mpr121"; - reg = <0x5a>; - }; - }; - - i2c@63fc8000 { /* I2C1 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; - }; - - camera: ov5642@3c { - compatible = "ovti,ov5642"; - reg = <0x3c>; - }; - - pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; - reg = <0x48>; - }; - }; - - ethernet@63fec000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec_1>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -188,3 +37,146 @@ }; }; }; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio4 11 0>; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + non-removable; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; + status = "okay"; + + zigbee: mc1323@0 { + compatible = "fsl,mc1323"; + spi-max-frequency = <8000000>; + reg = <0>; + }; + + flash: m25p32@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32", "st,m25p"; + spi-max-frequency = <20000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + magnetometer: mag3110@0e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + }; + + touchkey: mpr121@5a { + compatible = "fsl,mpr121"; + reg = <0x5a>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + camera: ov5642@3c { + compatible = "ovti,ov5642"; + reg = <0x3c>; + }; + + pmic: dialog@48 { + compatible = "dialog,da9053", "dialog,da9052"; + reg = <0x48>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi new file mode 100644 index 000000000000..8278ec5ec222 --- /dev/null +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -0,0 +1,172 @@ +/* + * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "imx53.dtsi" + +/ { + model = "TQ TQMa53"; + compatible = "tq,tqma53", "fsl,imx53"; + + memory { + reg = <0x70000000 0x40000000>; /* Up to 1GiB */ + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; + wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 0>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2>; + status = "disabled"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + fsl,spi-num-chipselects = <4>; + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, + <&gpio3 24 0>, <&gpio3 25 0>; + status = "disabled"; +}; + +&esdhc3 { /* EMMC */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; + vmmc-supply = <®_3p3v>; + non-removable; + bus-width = <8>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + i2s { + pinctrl_i2s_1: i2s-grp1 { + fsl,pins = < + 1 0x10000 /* I2S_MCLK */ + 10 0x10000 /* I2S_SCLK */ + 17 0x10000 /* I2S_DOUT */ + 23 0x10000 /* I2S_LRCLK*/ + 30 0x10000 /* I2S_DIN */ + >; + }; + }; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 610 0x10000 /* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/ + 711 0x10000 /* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/ + 873 0x10000 /* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/ + 878 0x10000 /* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/ + 922 0x10000 /* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/ + 928 0x10000 /* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/ + 982 0x10000 /* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/ + 989 0x10000 /* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/ + 1069 0x10000 /* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/ + 1093 0x10000 /* MX53_PAD_GPIO_3__GPIO1_3 */ + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_2>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_1>; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_1>; + status = "disabled"; +}; + +&cspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cspi_1>; + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, + <&gpio1 21 0>; + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; + status = "okay"; + + pmic: mc34708@8 { + compatible = "fsl,mc34708"; + reg = <0x8>; + fsl,mc13xxx-uses-rtc; + interrupt-parent = <&gpio2>; + interrupts = <6 8>; /* PDATA_DATA6, low active */ + }; + + sensor1: lm75@48 { + compatible = "lm75"; + reg = <0x48>; + }; + + eeprom: 24c64@50 { + compatible = "at,24c64"; + pagesize = <32>; + reg = <0x50>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; + phy-mode = "rmii"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index edc3f1eb6699..d05aa215c7f9 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -274,6 +274,44 @@ }; }; + csi { + pinctrl_csi_1: csigrp-1 { + fsl,pins = < + 286 0x1d5 /* MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN */ + 291 0x1d5 /* MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC */ + 280 0x1d5 /* MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC */ + 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ + 409 0x1d5 /* MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 */ + 402 0x1d5 /* MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 */ + 395 0x1d5 /* MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 */ + 388 0x1d5 /* MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 */ + 381 0x1d5 /* MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 */ + 374 0x1d5 /* MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 */ + 367 0x1d5 /* MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 */ + 360 0x1d5 /* MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 */ + 352 0x1d5 /* MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 */ + 344 0x1d5 /* MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 */ + 336 0x1d5 /* MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 */ + 328 0x1d5 /* MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 */ + 320 0x1d5 /* MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 */ + 312 0x1d5 /* MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 */ + 304 0x1d5 /* MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 */ + 296 0x1d5 /* MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 */ + 276 0x1d5 /* MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK */ + >; + }; + }; + + cspi { + pinctrl_cspi_1: cspigrp-1 { + fsl,pins = < + 998 0x1d5 /* MX53_PAD_SD1_DATA0__CSPI_MISO */ + 1008 0x1d5 /* MX53_PAD_SD1_CMD__CSPI_MOSI */ + 1022 0x1d5 /* MX53_PAD_SD1_CLK__CSPI_SCLK */ + >; + }; + }; + ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { fsl,pins = < @@ -349,6 +387,13 @@ 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ >; }; + + pinctrl_can1_2: can1grp-2 { + fsl,pins = < + 37 0x80000000 /* MX53_PAD_KEY_COL2__CAN1_TXCAN */ + 44 0x80000000 /* MX53_PAD_KEY_ROW2__CAN1_RXCAN */ + >; + }; }; can2 { @@ -387,6 +432,14 @@ }; }; + owire { + pinctrl_owire_1: owiregrp-1 { + fsl,pins = < + 1166 0x80000000 /* MX53_PAD_GPIO_18__OWIRE_LINE */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -421,6 +474,14 @@ 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ >; }; + + pinctrl_uart3_2: uart3grp-2 { + fsl,pins = < + 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ + 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + >; + }; + }; uart4 { @@ -570,6 +631,13 @@ status = "disabled"; }; + owire: owire@63fa4000 { + compatible = "fsl,imx53-owire", "fsl,imx21-owire"; + reg = <0x63fa4000 0x4000>; + clocks = <&clks 159>; + status = "disabled"; + }; + ecspi2: ecspi@63fac000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi new file mode 100644 index 000000000000..63fafe2a606c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/include/ "imx6qdl.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + soc { + aips1: aips-bus@02000000 { + pxp: pxp@020f0000 { + reg = <0x020f0000 0x4000>; + interrupts = <0 98 0x04>; + }; + + epdc: epdc@020f4000 { + reg = <0x020f4000 0x4000>; + interrupts = <0 97 0x04>; + }; + + lcdif: lcdif@020f8000 { + reg = <0x020f8000 0x4000>; + interrupts = <0 39 0x04>; + }; + }; + + aips2: aips-bus@02100000 { + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = <0 35 0x04>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 5bfa02a3f85c..53eb241fa5ad 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -21,71 +21,6 @@ reg = <0x10000000 0x80000000>; }; - soc { - gpmi-nand@00112000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_1>; - status = "disabled"; /* gpmi nand conflicts with SD */ - }; - - aips-bus@02000000 { /* AIPS1 */ - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ - >; - }; - }; - - arm2 { - pinctrl_usdhc3_arm2: usdhc3grp-arm2 { - fsl,pins = < - 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ - 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ - >; - }; - }; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_2>; - phy-mode = "rgmii"; - status = "okay"; - }; - - usdhc@02198000 { /* uSDHC3 */ - cd-gpios = <&gpio6 11 0>; - wp-gpios = <&gpio6 14 0>; - vmmc-supply = <®_3p3v>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1 - &pinctrl_usdhc3_arm2>; - status = "okay"; - }; - - usdhc@0219c000 { /* uSDHC4 */ - non-removable; - vmmc-supply = <®_3p3v>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4_1>; - status = "okay"; - }; - - uart4: serial@021f0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4_1>; - status = "okay"; - }; - }; - }; - regulators { compatible = "simple-bus"; @@ -108,3 +43,62 @@ }; }; }; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "disabled"; /* gpmi nand conflicts with SD */ +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < + 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ + 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&usdhc3 { + cd-gpios = <&gpio6 11 0>; + wp-gpios = <&gpio6 14 0>; + vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; + status = "okay"; +}; + +&usdhc4 { + non-removable; + vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts index 826e4ad1477e..656d489122fe 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -20,45 +20,39 @@ memory { reg = <0x10000000 0x80000000>; }; +}; - soc { - aips-bus@02000000 { /* AIPS1 */ - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ - 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ - >; - }; - }; - }; + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ + 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + >; }; + }; +}; - aips-bus@02100000 { /* AIPS2 */ - uart4: serial@021f0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4_1>; - status = "okay"; - }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_2>; - phy-mode = "rgmii"; - status = "okay"; - }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; +}; - usdhc@02198000 { /* uSDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; - status = "okay"; - }; - }; - }; +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d152328285a1..2ce355cd05e5 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -21,118 +21,6 @@ reg = <0x10000000 0x40000000>; }; - soc { - aips-bus@02000000 { /* AIPS1 */ - spba-bus@02000000 { - ecspi@02008000 { /* eCSPI1 */ - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - status = "okay"; - - flash: m25p80@0 { - compatible = "sst,sst25vf016b"; - spi-max-frequency = <20000000>; - reg = <0>; - }; - }; - - ssi1: ssi@02028000 { - fsl,mode = "i2s-slave"; - status = "okay"; - }; - }; - - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ - 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ - 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ - 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ - >; - }; - }; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - usb@02184000 { /* USB OTG */ - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; - }; - - usb@02184200 { /* USB1 */ - status = "okay"; - }; - - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; - status = "okay"; - }; - - usdhc@02198000 { /* uSDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - usdhc@0219c000 { /* uSDHC4 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4_2>; - cd-gpios = <&gpio2 6 0>; - wp-gpios = <&gpio2 7 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - audmux@021d8000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - }; - - uart2: serial@021e8000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - }; - - i2c@021a0000 { /* I2C1 */ - status = "okay"; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; @@ -176,3 +64,107 @@ mux-ext-port = <4>; }; }; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "sst,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ + 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ + 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ + 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + >; + }; + }; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_2>; + cd-gpios = <&gpio2 6 0>; + wp-gpios = <&gpio2 7 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&audmux { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 169>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index a42402562b7b..2dea304a7980 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -21,61 +21,6 @@ reg = <0x10000000 0x40000000>; }; - soc { - aips-bus@02000000 { /* AIPS1 */ - spba-bus@02000000 { - uart1: serial@02020000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; - }; - }; - - iomuxc@020e0000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ - 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ - 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ - 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ - 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ - 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ - >; - }; - }; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - ethernet@02188000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - status = "okay"; - }; - - usdhc@02194000 { /* uSDHC2 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_1>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; - status = "okay"; - }; - - usdhc@02198000 { /* uSDHC3 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -92,3 +37,50 @@ }; }; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ + 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ + 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ + 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ + 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ + 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index ff1205ea5719..cba021eb035e 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -1,33 +1,16 @@ + /* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. + * Copyright 2013 Freescale Semiconductor, Inc. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +/include/ "imx6qdl.dtsi" / { - aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - gpio5 = &gpio6; - gpio6 = &gpio7; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -38,12 +21,19 @@ next-level-cache = <&L2>; operating-points = < /* kHz uV */ - 792000 1100000 + 1200000 1275000 + 996000 1250000 + 792000 1150000 396000 950000 - 198000 850000 >; clock-latency = <61036>; /* two CLK32 periods */ - cpu0-supply = <®_cpu>; + clocks = <&clks 104>, <&clks 6>, <&clks 16>, + <&clks 17>, <&clks 170>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; cpu@1 { @@ -65,142 +55,9 @@ }; }; - intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - ckil { - compatible = "fsl,imx-ckil", "fixed-clock"; - clock-frequency = <32768>; - }; - - ckih1 { - compatible = "fsl,imx-ckih1", "fixed-clock"; - clock-frequency = <0>; - }; - - osc { - compatible = "fsl,imx-osc", "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - dma-apbh@00110000 { - compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; - reg = <0x00110000 0x2000>; - clocks = <&clks 106>; - }; - - nfc: gpmi-nand@00112000 { - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x00112000 0x2000>, <0x00114000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <0 13 0x04>, <0 15 0x04>; - interrupt-names = "gpmi-dma", "bch"; - clocks = <&clks 152>, <&clks 153>, <&clks 151>, - <&clks 150>, <&clks 149>; - clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", - "gpmi_bch_apb", "per1_bch"; - fsl,gpmi-dma-channel = <0>; - status = "disabled"; - }; - - timer@00a00600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x00a00600 0x20>; - interrupts = <1 13 0xf01>; - }; - - L2: l2-cache@00a02000 { - compatible = "arm,pl310-cache"; - reg = <0x00a02000 0x1000>; - interrupts = <0 92 0x04>; - cache-unified; - cache-level = <2>; - }; - aips-bus@02000000 { /* AIPS1 */ - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x100000>; - ranges; - spba-bus@02000000 { - compatible = "fsl,spba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x40000>; - ranges; - - spdif: spdif@02004000 { - reg = <0x02004000 0x4000>; - interrupts = <0 52 0x04>; - }; - - ecspi1: ecspi@02008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x02008000 0x4000>; - interrupts = <0 31 0x04>; - clocks = <&clks 112>, <&clks 112>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ecspi2: ecspi@0200c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x0200c000 0x4000>; - interrupts = <0 32 0x04>; - clocks = <&clks 113>, <&clks 113>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ecspi3: ecspi@02010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x02010000 0x4000>; - interrupts = <0 33 0x04>; - clocks = <&clks 114>, <&clks 114>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ecspi4: ecspi@02014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; - reg = <0x02014000 0x4000>; - interrupts = <0 34 0x04>; - clocks = <&clks 115>, <&clks 115>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - ecspi5: ecspi@02018000 { #address-cells = <1>; #size-cells = <0>; @@ -211,361 +68,6 @@ clock-names = "ipg", "per"; status = "disabled"; }; - - uart1: serial@02020000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <0 26 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - esai: esai@02024000 { - reg = <0x02024000 0x4000>; - interrupts = <0 51 0x04>; - }; - - ssi1: ssi@02028000 { - compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; - reg = <0x02028000 0x4000>; - interrupts = <0 46 0x04>; - clocks = <&clks 178>; - fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <38 37>; - status = "disabled"; - }; - - ssi2: ssi@0202c000 { - compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; - reg = <0x0202c000 0x4000>; - interrupts = <0 47 0x04>; - clocks = <&clks 179>; - fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <42 41>; - status = "disabled"; - }; - - ssi3: ssi@02030000 { - compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; - reg = <0x02030000 0x4000>; - interrupts = <0 48 0x04>; - clocks = <&clks 180>; - fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <46 45>; - status = "disabled"; - }; - - asrc: asrc@02034000 { - reg = <0x02034000 0x4000>; - interrupts = <0 50 0x04>; - }; - - spba@0203c000 { - reg = <0x0203c000 0x4000>; - }; - }; - - vpu: vpu@02040000 { - reg = <0x02040000 0x3c000>; - interrupts = <0 3 0x04 0 12 0x04>; - }; - - aipstz@0207c000 { /* AIPSTZ1 */ - reg = <0x0207c000 0x4000>; - }; - - pwm1: pwm@02080000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x02080000 0x4000>; - interrupts = <0 83 0x04>; - clocks = <&clks 62>, <&clks 145>; - clock-names = "ipg", "per"; - }; - - pwm2: pwm@02084000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x02084000 0x4000>; - interrupts = <0 84 0x04>; - clocks = <&clks 62>, <&clks 146>; - clock-names = "ipg", "per"; - }; - - pwm3: pwm@02088000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x02088000 0x4000>; - interrupts = <0 85 0x04>; - clocks = <&clks 62>, <&clks 147>; - clock-names = "ipg", "per"; - }; - - pwm4: pwm@0208c000 { - #pwm-cells = <2>; - compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; - reg = <0x0208c000 0x4000>; - interrupts = <0 86 0x04>; - clocks = <&clks 62>, <&clks 148>; - clock-names = "ipg", "per"; - }; - - can1: flexcan@02090000 { - reg = <0x02090000 0x4000>; - interrupts = <0 110 0x04>; - }; - - can2: flexcan@02094000 { - reg = <0x02094000 0x4000>; - interrupts = <0 111 0x04>; - }; - - gpt: gpt@02098000 { - compatible = "fsl,imx6q-gpt"; - reg = <0x02098000 0x4000>; - interrupts = <0 55 0x04>; - }; - - gpio1: gpio@0209c000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x0209c000 0x4000>; - interrupts = <0 66 0x04 0 67 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@020a0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020a0000 0x4000>; - interrupts = <0 68 0x04 0 69 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@020a4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020a4000 0x4000>; - interrupts = <0 70 0x04 0 71 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@020a8000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020a8000 0x4000>; - interrupts = <0 72 0x04 0 73 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@020ac000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020ac000 0x4000>; - interrupts = <0 74 0x04 0 75 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@020b0000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020b0000 0x4000>; - interrupts = <0 76 0x04 0 77 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@020b4000 { - compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; - reg = <0x020b4000 0x4000>; - interrupts = <0 78 0x04 0 79 0x04>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - kpp: kpp@020b8000 { - reg = <0x020b8000 0x4000>; - interrupts = <0 82 0x04>; - }; - - wdog1: wdog@020bc000 { - compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; - reg = <0x020bc000 0x4000>; - interrupts = <0 80 0x04>; - clocks = <&clks 0>; - }; - - wdog2: wdog@020c0000 { - compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; - reg = <0x020c0000 0x4000>; - interrupts = <0 81 0x04>; - clocks = <&clks 0>; - status = "disabled"; - }; - - clks: ccm@020c4000 { - compatible = "fsl,imx6q-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <0 87 0x04 0 88 0x04>; - #clock-cells = <1>; - }; - - anatop: anatop@020c8000 { - compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; - reg = <0x020c8000 0x1000>; - interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; - - regulator-1p1@110 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; - regulator-always-on; - anatop-reg-offset = <0x110>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <4>; - anatop-min-voltage = <800000>; - anatop-max-voltage = <1375000>; - }; - - regulator-3p0@120 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd3p0"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - anatop-reg-offset = <0x120>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <0>; - anatop-min-voltage = <2625000>; - anatop-max-voltage = <3400000>; - }; - - regulator-2p5@130 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd2p5"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2750000>; - regulator-always-on; - anatop-reg-offset = <0x130>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <0>; - anatop-min-voltage = <2000000>; - anatop-max-voltage = <2750000>; - }; - - reg_cpu: regulator-vddcore@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "cpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <0>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - regulator-vddpu@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <9>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - regulator-vddsoc@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddsoc"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <18>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - }; - - usbphy1: usbphy@020c9000 { - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; - reg = <0x020c9000 0x1000>; - interrupts = <0 44 0x04>; - clocks = <&clks 182>; - }; - - usbphy2: usbphy@020ca000 { - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; - reg = <0x020ca000 0x1000>; - interrupts = <0 45 0x04>; - clocks = <&clks 183>; - }; - - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; - - snvs-rtc-lp@34 { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; - interrupts = <0 19 0x04 0 20 0x04>; - }; - }; - - epit1: epit@020d0000 { /* EPIT1 */ - reg = <0x020d0000 0x4000>; - interrupts = <0 56 0x04>; - }; - - epit2: epit@020d4000 { /* EPIT2 */ - reg = <0x020d4000 0x4000>; - interrupts = <0 57 0x04>; - }; - - src: src@020d8000 { - compatible = "fsl,imx6q-src"; - reg = <0x020d8000 0x4000>; - interrupts = <0 91 0x04 0 96 0x04>; - }; - - gpc: gpc@020dc000 { - compatible = "fsl,imx6q-gpc"; - reg = <0x020dc000 0x4000>; - interrupts = <0 89 0x04 0 90 0x04>; - }; - - gpr: iomuxc-gpr@020e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; }; iomuxc: iomuxc@020e0000 { @@ -780,272 +282,6 @@ }; }; }; - - dcic1: dcic@020e4000 { - reg = <0x020e4000 0x4000>; - interrupts = <0 124 0x04>; - }; - - dcic2: dcic@020e8000 { - reg = <0x020e8000 0x4000>; - interrupts = <0 125 0x04>; - }; - - sdma: sdma@020ec000 { - compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; - reg = <0x020ec000 0x4000>; - interrupts = <0 2 0x04>; - clocks = <&clks 155>, <&clks 155>; - clock-names = "ipg", "ahb"; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin"; - }; - }; - - aips-bus@02100000 { /* AIPS2 */ - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02100000 0x100000>; - ranges; - - caam@02100000 { - reg = <0x02100000 0x40000>; - interrupts = <0 105 0x04 0 106 0x04>; - }; - - aipstz@0217c000 { /* AIPSTZ2 */ - reg = <0x0217c000 0x4000>; - }; - - usbotg: usb@02184000 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184000 0x200>; - interrupts = <0 43 0x04>; - clocks = <&clks 162>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - status = "disabled"; - }; - - usbh1: usb@02184200 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184200 0x200>; - interrupts = <0 40 0x04>; - clocks = <&clks 162>; - fsl,usbphy = <&usbphy2>; - fsl,usbmisc = <&usbmisc 1>; - status = "disabled"; - }; - - usbh2: usb@02184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184400 0x200>; - interrupts = <0 41 0x04>; - clocks = <&clks 162>; - fsl,usbmisc = <&usbmisc 2>; - status = "disabled"; - }; - - usbh3: usb@02184600 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184600 0x200>; - interrupts = <0 42 0x04>; - clocks = <&clks 162>; - fsl,usbmisc = <&usbmisc 3>; - status = "disabled"; - }; - - usbmisc: usbmisc: usbmisc@02184800 { - #index-cells = <1>; - compatible = "fsl,imx6q-usbmisc"; - reg = <0x02184800 0x200>; - clocks = <&clks 162>; - }; - - fec: ethernet@02188000 { - compatible = "fsl,imx6q-fec"; - reg = <0x02188000 0x4000>; - interrupts = <0 118 0x04 0 119 0x04>; - clocks = <&clks 117>, <&clks 117>, <&clks 190>; - clock-names = "ipg", "ahb", "ptp"; - status = "disabled"; - }; - - mlb@0218c000 { - reg = <0x0218c000 0x4000>; - interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; - }; - - usdhc1: usdhc@02190000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x02190000 0x4000>; - interrupts = <0 22 0x04>; - clocks = <&clks 163>, <&clks 163>, <&clks 163>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - usdhc2: usdhc@02194000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x02194000 0x4000>; - interrupts = <0 23 0x04>; - clocks = <&clks 164>, <&clks 164>, <&clks 164>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - usdhc3: usdhc@02198000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x02198000 0x4000>; - interrupts = <0 24 0x04>; - clocks = <&clks 165>, <&clks 165>, <&clks 165>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - usdhc4: usdhc@0219c000 { - compatible = "fsl,imx6q-usdhc"; - reg = <0x0219c000 0x4000>; - interrupts = <0 25 0x04>; - clocks = <&clks 166>, <&clks 166>, <&clks 166>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; - - i2c1: i2c@021a0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; - reg = <0x021a0000 0x4000>; - interrupts = <0 36 0x04>; - clocks = <&clks 125>; - status = "disabled"; - }; - - i2c2: i2c@021a4000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; - reg = <0x021a4000 0x4000>; - interrupts = <0 37 0x04>; - clocks = <&clks 126>; - status = "disabled"; - }; - - i2c3: i2c@021a8000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; - reg = <0x021a8000 0x4000>; - interrupts = <0 38 0x04>; - clocks = <&clks 127>; - status = "disabled"; - }; - - romcp@021ac000 { - reg = <0x021ac000 0x4000>; - }; - - mmdc0: mmdc@021b0000 { /* MMDC0 */ - compatible = "fsl,imx6q-mmdc"; - reg = <0x021b0000 0x4000>; - }; - - mmdc1: mmdc@021b4000 { /* MMDC1 */ - reg = <0x021b4000 0x4000>; - }; - - weim@021b8000 { - reg = <0x021b8000 0x4000>; - interrupts = <0 14 0x04>; - }; - - ocotp@021bc000 { - reg = <0x021bc000 0x4000>; - }; - - ocotp@021c0000 { - reg = <0x021c0000 0x4000>; - interrupts = <0 21 0x04>; - }; - - tzasc@021d0000 { /* TZASC1 */ - reg = <0x021d0000 0x4000>; - interrupts = <0 108 0x04>; - }; - - tzasc@021d4000 { /* TZASC2 */ - reg = <0x021d4000 0x4000>; - interrupts = <0 109 0x04>; - }; - - audmux: audmux@021d8000 { - compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; - reg = <0x021d8000 0x4000>; - status = "disabled"; - }; - - mipi@021dc000 { /* MIPI-CSI */ - reg = <0x021dc000 0x4000>; - }; - - mipi@021e0000 { /* MIPI-DSI */ - reg = <0x021e0000 0x4000>; - }; - - vdoa@021e4000 { - reg = <0x021e4000 0x4000>; - interrupts = <0 18 0x04>; - }; - - uart2: serial@021e8000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021e8000 0x4000>; - interrupts = <0 27 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@021ec000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021ec000 0x4000>; - interrupts = <0 28 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart4: serial@021f0000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021f0000 0x4000>; - interrupts = <0 29 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart5: serial@021f4000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021f4000 0x4000>; - interrupts = <0 30 0x04>; - clocks = <&clks 160>, <&clks 161>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - }; - - ipu1: ipu@02400000 { - #crtc-cells = <1>; - compatible = "fsl,imx6q-ipu"; - reg = <0x02400000 0x400000>; - interrupts = <0 6 0x4 0 5 0x4>; - clocks = <&clks 130>, <&clks 131>, <&clks 132>; - clock-names = "bus", "di0", "di1"; }; ipu2: ipu@02800000 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi new file mode 100644 index 000000000000..06ec460b4581 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -0,0 +1,800 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + clock-frequency = <0>; + }; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + dma-apbh@00110000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x00110000 0x2000>; + clocks = <&clks 106>; + }; + + gpmi: gpmi-nand@00112000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 152>, <&clks 153>, <&clks 151>, + <&clks 150>, <&clks 149>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; + }; + + timer@00a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <0 92 0x04>; + cache-unified; + cache-level = <2>; + }; + + aips-bus@02000000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <0 31 0x04>; + clocks = <&clks 112>, <&clks 112>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <0 32 0x04>; + clocks = <&clks 113>, <&clks 113>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <0 33 0x04>; + clocks = <&clks 114>, <&clks 114>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <0 34 0x04>; + clocks = <&clks 115>, <&clks 115>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + esai: esai@02024000 { + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <0 46 0x04>; + clocks = <&clks 178>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <38 37>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <0 47 0x04>; + clocks = <&clks 179>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <42 41>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <0 48 0x04>; + clocks = <&clks 180>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <46 45>; + status = "disabled"; + }; + + asrc: asrc@02034000 { + reg = <0x02034000 0x4000>; + interrupts = <0 50 0x04>; + }; + + spba@0203c000 { + reg = <0x0203c000 0x4000>; + }; + }; + + vpu: vpu@02040000 { + reg = <0x02040000 0x3c000>; + interrupts = <0 3 0x04 0 12 0x04>; + }; + + aipstz@0207c000 { /* AIPSTZ1 */ + reg = <0x0207c000 0x4000>; + }; + + pwm1: pwm@02080000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <0 83 0x04>; + clocks = <&clks 62>, <&clks 145>; + clock-names = "ipg", "per"; + }; + + pwm2: pwm@02084000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <0 84 0x04>; + clocks = <&clks 62>, <&clks 146>; + clock-names = "ipg", "per"; + }; + + pwm3: pwm@02088000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <0 85 0x04>; + clocks = <&clks 62>, <&clks 147>; + clock-names = "ipg", "per"; + }; + + pwm4: pwm@0208c000 { + #pwm-cells = <2>; + compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <0 86 0x04>; + clocks = <&clks 62>, <&clks 148>; + clock-names = "ipg", "per"; + }; + + can1: flexcan@02090000 { + reg = <0x02090000 0x4000>; + interrupts = <0 110 0x04>; + }; + + can2: flexcan@02094000 { + reg = <0x02094000 0x4000>; + interrupts = <0 111 0x04>; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6q-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <0 55 0x04>; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <0 66 0x04 0 67 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <0 68 0x04 0 69 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <0 70 0x04 0 71 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <0 72 0x04 0 73 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <0 74 0x04 0 75 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <0 76 0x04 0 77 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@020b4000 { + compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = <0 78 0x04 0 79 0x04>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + reg = <0x020b8000 0x4000>; + interrupts = <0 82 0x04>; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <0 80 0x04>; + clocks = <&clks 0>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <0 81 0x04>; + clocks = <&clks 0>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2000000>; + anatop-max-voltage = <2750000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pu: regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; + clocks = <&clks 182>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <0 45 0x04>; + clocks = <&clks 183>; + }; + + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; + }; + + epit1: epit@020d0000 { /* EPIT1 */ + reg = <0x020d0000 0x4000>; + interrupts = <0 56 0x04>; + }; + + epit2: epit@020d4000 { /* EPIT2 */ + reg = <0x020d4000 0x4000>; + interrupts = <0 57 0x04>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6q-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 0x04 0 96 0x04>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 0x04 0 90 0x04>; + }; + + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + + dcic1: dcic@020e4000 { + reg = <0x020e4000 0x4000>; + interrupts = <0 124 0x04>; + }; + + dcic2: dcic@020e8000 { + reg = <0x020e8000 0x4000>; + interrupts = <0 125 0x04>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <0 2 0x04>; + clocks = <&clks 155>, <&clks 155>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + caam@02100000 { + reg = <0x02100000 0x40000>; + interrupts = <0 105 0x04 0 106 0x04>; + }; + + aipstz@0217c000 { /* AIPSTZ2 */ + reg = <0x0217c000 0x4000>; + }; + + usbotg: usb@02184000 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + clocks = <&clks 162>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbh1: usb@02184200 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + clocks = <&clks 162>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh2: usb@02184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 2>; + status = "disabled"; + }; + + usbh3: usb@02184600 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184600 0x200>; + interrupts = <0 42 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 3>; + status = "disabled"; + }; + + usbmisc: usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks 162>; + }; + + fec: ethernet@02188000 { + compatible = "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <0 118 0x04 0 119 0x04>; + clocks = <&clks 117>, <&clks 117>, <&clks 190>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + mlb@0218c000 { + reg = <0x0218c000 0x4000>; + interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <0 22 0x04>; + clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <0 23 0x04>; + clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <0 24 0x04>; + clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6q-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <0 25 0x04>; + clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <0 36 0x04>; + clocks = <&clks 125>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <0 37 0x04>; + clocks = <&clks 126>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <0 38 0x04>; + clocks = <&clks 127>; + status = "disabled"; + }; + + romcp@021ac000 { + reg = <0x021ac000 0x4000>; + }; + + mmdc0: mmdc@021b0000 { /* MMDC0 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + mmdc1: mmdc@021b4000 { /* MMDC1 */ + reg = <0x021b4000 0x4000>; + }; + + weim@021b8000 { + reg = <0x021b8000 0x4000>; + interrupts = <0 14 0x04>; + }; + + ocotp@021bc000 { + compatible = "fsl,imx6q-ocotp"; + reg = <0x021bc000 0x4000>; + }; + + ocotp@021c0000 { + reg = <0x021c0000 0x4000>; + interrupts = <0 21 0x04>; + }; + + tzasc@021d0000 { /* TZASC1 */ + reg = <0x021d0000 0x4000>; + interrupts = <0 108 0x04>; + }; + + tzasc@021d4000 { /* TZASC2 */ + reg = <0x021d4000 0x4000>; + interrupts = <0 109 0x04>; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + mipi@021dc000 { /* MIPI-CSI */ + reg = <0x021dc000 0x4000>; + }; + + mipi@021e0000 { /* MIPI-DSI */ + reg = <0x021e0000 0x4000>; + }; + + vdoa@021e4000 { + reg = <0x021e4000 0x4000>; + interrupts = <0 18 0x04>; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <0 27 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <0 29 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <0 30 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + ipu1: ipu@02400000 { + #crtc-cells = <1>; + compatible = "fsl,imx6q-ipu"; + reg = <0x02400000 0x400000>; + interrupts = <0 6 0x4 0 5 0x4>; + clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clock-names = "bus", "di0", "di1"; + }; + }; +}; |