Merge tag 'oxnas-arm-soc-dt-for-4.10' of https://github.com/OXNAS/linux into next/dt

Pull "ARM: OXNAS SoC DT updates for 4.10" from Neil Armstrong:

- Add DTSI for Oxford Semiconductor OX820
- Add DTS for Cloud Engines PogoPlug v3 board
- Fix MAINTAINERS Oxnas entry for dts files
from http://lkml.kernel.org/r/20161102141850.25164-1-narmstrong@baylibre.com

* tag 'oxnas-arm-soc-dt-for-4.10' of https://github.com/OXNAS/linux:
  MAINTAINERS: oxnas: Add new files definitions
  ARM: dts: Add support for OX820 and Pogoplug V3

3 files changed, 392 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5bd08e9cf2ad..befa3141fafb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -616,7 +616,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_OXNAS) += \
-	wd-mbwe.dtb
+	wd-mbwe.dtb \
+	cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-arrow-sd-600eval.dtb \
diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
new file mode 100644
index 000000000000..bfde32e37123
--- /dev/null
+++ b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
@@ -0,0 +1,94 @@
+/*
+ * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+	model = "Cloud Engines PogoPlug Series 3";
+
+	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x60000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "pogoplug:blue";
+			gpios = <&gpio0 2 0>;
+			default-state = "keep";
+		};
+
+		orange {
+			label = "pogoplug:orange";
+			gpios = <&gpio1 16 1>;
+			default-state = "keep";
+		};
+
+		green {
+			label = "pogoplug:green";
+			gpios = <&gpio1 17 1>;
+			default-state = "keep";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&nandc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "hamming";
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00e00000>;
+			read-only;
+		};
+
+		partition@e00000 {
+			label = "ubi";
+			reg = <0x00e00000 0x07200000>;
+		};
+	};
+};
+
+&etha {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_etha_mdio>;
+};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
new file mode 100644
index 000000000000..e40f282a023a
--- /dev/null
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -0,0 +1,296 @@
+/*
+ * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "oxsemi,ox820";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "oxsemi,ox820-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <1>;
+		};
+	};
+
+	memory {
+		/* Max 512MB @ 0x60000000 */
+		reg = <0x60000000 0x20000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		plla: plla {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <850000000>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&plla>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&gic>;
+
+		nandc: nand-controller@41000000 {
+			compatible = "oxsemi,ox820-nand";
+			reg = <0x41000000 0x100000>;
+			clocks = <&stdclk 11>;
+			resets = <&reset 15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		etha: ethernet@40400000 {
+			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
+			reg = <0x40400000 0x2000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			mac-address = [000000000000]; /* Filled in by U-Boot */
+			phy-mode = "rgmii";
+
+			clocks = <&stdclk 9>, <&gmacclk>;
+			clock-names = "gmac", "stmmaceth";
+			resets = <&reset 6>;
+
+			/* Regmap for sys registers */
+			oxsemi,sys-ctrl = <&sys>;
+
+			status = "disabled";
+		};
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox820-pinctrl";
+
+				/* Regmap for sys registers */
+				oxsemi,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0 {
+						pins = "gpio30", "gpio31";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0_modem_a {
+						pins = "gpio24", "gpio24", "gpio26", "gpio27";
+						function = "fct4";
+					};
+					uart0_modem_b {
+						pins = "gpio28", "gpio29";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1 {
+						pins = "gpio7", "gpio8";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1_modem {
+						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_etha_mdio: etha_mdio {
+					etha_mdio {
+						pins = "gpio3", "gpio4";
+						function = "fct1";
+					};
+				};
+
+				pinctrl_nand: nand {
+					nand {
+						pins = "gpio12", "gpio13", "gpio14", "gpio15",
+						     "gpio16", "gpio17", "gpio18", "gpio19",
+						     "gpio20", "gpio21", "gpio22", "gpio23",
+						     "gpio24";
+						function = "fct1";
+					};
+				};
+			};
+
+			gpio0: gpio@000000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				oxsemi,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <18>;
+				oxsemi,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 18>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset 17>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset 18>;
+			};
+
+			rps@400000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x400000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xFFFFFFFF>;
+					clear-mask = <0>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox820-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&sysclk>;
+					interrupt-parent = <&intc>;
+					interrupts = <4>;
+				};
+			};
+
+			sys: sys-ctrl@e00000 {
+				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0xe00000 0x200000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+		};
+
+		apb-bridge@47000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x47000000 0x1000000>;
+
+			scu: scu@0 {
+				compatible = "arm,arm11mp-scu";
+				reg = <0x0 0x100>;
+			};
+
+			local-timer@600 {
+				compatible = "arm,arm11mp-twd-timer";
+				reg = <0x600 0x20>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&armclk>;
+			};
+
+			gic: gic@1000 {
+				compatible = "arm,arm11mp-gic";
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				reg = <0x1000 0x1000>,
+				      <0x100 0x500>;
+			};
+		};
+	};
+};