diff options
author | Olof Johansson <olof@lixom.net> | 2020-01-26 00:28:41 +0300 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2020-01-26 00:28:52 +0300 |
commit | 19d52e94e08391cd05cee227bcc1360a8fb29369 (patch) | |
tree | 0a043c77e48869733785c23dbe240ba9356fd4ec /arch/arm/boot/dts | |
parent | 955d8f3ecb9d5d50f9729dd0dfd6164cd726d4bb (diff) | |
parent | 2256e6f68c9e02524182640ba9584d978d490145 (diff) | |
download | linux-19d52e94e08391cd05cee227bcc1360a8fb29369.tar.xz |
Merge tag 'omap-for-v5.6/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late
Late omap dts changes for v5.6 merge window
This series of changes mostly configures the cameras for dra7 and
am437x that have been pending for few months now because of waiting
for clock dependencies to clear. So these changes are based on earlier
dts changes with with Tero Kristo's for-5.6-ti-clk branch merged in.
Then there's a series of changes to configure powervr sgx target module
for am335x, am437x and dra7 that have been waiting to have the rstctrl
reset driver dependencies to clear.
Also included are few minor patches to configure 1-wire and coulomb
counter calibration interrupt for droid4.
* tag 'omap-for-v5.6/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
ARM: dts: Configure interconnect target module for am437x sgx
ARM: dts: Configure sgx for dra7
ARM: dts: Configure rstctrl reset for am335x SGX
ARM: dts: dra7: Add ti-sysc node for VPE
ARM: dts: dra7: add vpe clkctrl node
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43xx: add support for clkout1 clock
arm: dts: dra76-evm: Add CAL and OV5640 nodes
arm: dtsi: dra76x: Add CAL dtsi node
arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
ARM: dts: DRA72: Add CAL dtsi node
ARM: dts: dra7-l4: Add ti-sysc node for CAM
ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
ARM: dts: dra7: add cam clkctrl node
ARM: dts: Add omap3-echo
ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725
ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0
...
Link: https://lore.kernel.org/r/pull-1579896427-50330@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm/boot/dts')
24 files changed, 1084 insertions, 69 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 08011dc8c7a6..3f2668f0f712 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -691,6 +691,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-devkit8000.dtb \ omap3-devkit8000-lcd43.dtb \ omap3-devkit8000-lcd70.dtb \ + omap3-echo.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-gta04a3.dtb \ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 6f0a6be93098..68252dab32c3 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -113,7 +113,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -121,35 +121,15 @@ }; panel { - compatible = "ti,tilcdc,panel"; - status = "okay"; + compatible = "tfc,s9700rtwv43tr-01b"; + pinctrl-names = "default"; pinctrl-0 = <&lcd_pins_s0>; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; + backlight = <&backlight>; - display-timings { - 800x480p62 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <39>; - hback-porch = <39>; - hsync-len = <47>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <2>; - hsync-active = <1>; - vsync-active = <1>; + port { + panel_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; }; }; }; @@ -500,6 +480,12 @@ status = "okay"; blue-and-red-wiring = "crossed"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&panel_0>; + }; + }; }; &elm { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index a97f9df460c1..32f515a295ee 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -183,36 +183,16 @@ }; panel { - compatible = "ti,tilcdc,panel"; + compatible = "newhaven,nhd-4.3-480272ef-atxl"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&lcd_pins_default>; pinctrl-1 = <&lcd_pins_sleep>; backlight = <&lcd_bl>; - status = "okay"; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - display-timings { - 480x272 { - hactive = <480>; - vactive = <272>; - hback-porch = <43>; - hfront-porch = <8>; - hsync-len = <4>; - vback-porch = <12>; - vfront-porch = <4>; - vsync-len = <10>; - clock-frequency = <9000000>; - hsync-active = <0>; - vsync-active = <0>; + + port { + panel_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; }; }; }; @@ -725,6 +705,12 @@ status = "okay"; blue-and-red-wiring = "crossed"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&panel_0>; + }; + }; }; &rtc { diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 204bccfcc110..021eb57261fe 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -287,6 +287,19 @@ gpio-controller; #gpio-cells = <2>; }; + + /* osd9616p0899-10 */ + display@3c { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + solomon,height = <16>; + solomon,width = <96>; + solomon,com-seq; + solomon,com-invdir; + solomon,page-offset = <0>; + solomon,prechargep1 = <2>; + solomon,prechargep2 = <13>; + }; }; &spi0 { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index e403fb765e70..41dcfb37155a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -496,6 +496,31 @@ dma-names = "tx", "rx"; }; }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_gfx 0>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x1000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; }; }; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 125379ecab2f..e0b5a00e2078 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -74,7 +74,7 @@ clock-names = "ick"; }; - davinci_mdio: ethernet@5c030000 { + davinci_mdio: mdio@5c030000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; status = "disabled"; diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi new file mode 100644 index 000000000000..2b994ae790c9 --- /dev/null +++ b/arch/arm/boot/dts/am3703.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de> + */ + +#include "omap36xx.dtsi" + +&iva { + status = "disabled"; +}; + +&sgx_module { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi new file mode 100644 index 000000000000..ab328e8c0bd8 --- /dev/null +++ b/arch/arm/boot/dts/am3715.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de> + */ + +#include "omap36xx.dtsi" + +&iva { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index e4072d0f871a..faa14dc0faff 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -445,6 +445,26 @@ pool; }; }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_gfx 0>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x1000000>; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 74eaa6a3b258..25222497f828 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -272,6 +272,12 @@ >; }; + clkout1_pin: pinmux_clkout1_pin { + pinctrl-single,pins = < + 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */ + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -593,6 +599,25 @@ pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&clkout1_pin>; + + clocks = <&clkout1_mux_ck>; + clock-names = "xvclk"; + assigned-clocks = <&clkout1_mux_ck>; + assigned-clock-parents = <&clkout1_osc_div_ck>; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; + edt-ft5306@38 { status = "okay"; compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; @@ -877,7 +902,7 @@ /* Camera port */ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 078cb473fa7d..2affc7c300ed 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -145,6 +145,12 @@ system-clock-frequency = <12000000>; }; }; + + audio_mstrclk: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; }; &am43xx_pinmux { @@ -696,6 +702,21 @@ IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&audio_mstrclk>; + clock-names = "xvclk"; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe1_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &i2c2 { @@ -962,7 +983,7 @@ port { vpfe1_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 091356f2a8c1..c726cd8dbdf1 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -704,6 +704,60 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; + + clkout1_osc_div_ck: clkout1-osc-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <20>; + ti,max-div = <4>; + reg = <0x4100>; + }; + + clkout1_src2_mux_ck: clkout1-src2-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>; + reg = <0x4100>; + }; + + clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4100>; + }; + + clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4100>; + }; + + clkout1_mux_ck: clkout1-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, + <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; + ti,bit-shift = <16>; + reg = <0x4100>; + }; + + clkout1_ck: clkout1-ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout1_mux_ck>; + ti,bit-shift = <23>; + reg = <0x4100>; + }; }; &prcm { diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 398721c7201c..aa5e55f98179 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -9,6 +9,7 @@ aliases { rtc0 = &tps659038_rtc; rtc1 = &rtc; + display0 = &hdmi0; }; chosen { @@ -96,6 +97,48 @@ default-state = "off"; }; }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s016", "ti,tpd12s015"; + + gpios = <0>, /* optional CT_CP_HPD */ + <0>, /* optional LS_OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &dra7_pmx_core { @@ -485,3 +528,19 @@ &cpu0 { vdd-supply = <&smps12_reg>; }; + +&hdmi { + status = "okay"; + + vdda-supply = <&ldo4_reg>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi new file mode 100644 index 000000000000..d24e906a14b1 --- /dev/null +++ b/arch/arm/boot/dts/dm3725.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de> + */ + +#include "omap36xx.dtsi" + +&sgx_module { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index c1740868042a..fc418834890d 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -4176,35 +4176,88 @@ }; target-module@170000 { /* 0x48970000, ap 21 0a.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x170010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x170000 0x10000>; + status = "disabled"; }; target-module@190000 { /* 0x48990000, ap 23 2e.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x190010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x190000 0x10000>; + status = "disabled"; }; target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1b0000 0x4>, + <0x1b0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1b0000 0x10000>; + status = "disabled"; }; - target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */ - compatible = "ti,sysc"; - status = "disabled"; + target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1d0010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1d0000 0x10000>; + + vpe: vpe@0 { + compatible = "ti,dra7-vpe"; + reg = <0x0000 0x120>, + <0x0700 0x80>, + <0x5700 0x18>, + <0xd000 0x400>; + reg-names = "vpe_top", + "sc", + "csc", + "vpdma"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 40ac514702ac..d78b684e7fca 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -673,6 +673,24 @@ status = "disabled"; }; + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9eabfd1502da..01558a86af82 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -187,6 +187,12 @@ gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &dra7_pmx_core { @@ -269,6 +275,23 @@ line-name = "vin6_sel_s0"; }; }; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; &uart1 { @@ -580,3 +603,11 @@ &pcie1_rc { status = "okay"; }; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f5762709c853..82b57a35abc0 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -17,6 +17,48 @@ }; }; +&l4_per2 { + target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + cal: cal@0 { + compatible = "ti,dra72-cal"; + reg = <0x0000 0x400>, + <0x0800 0x40>, + <0x0900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0xE94>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; +}; + &dss { reg = <0x58000000 0x80>, <0x58004054 0x4>, diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 1fb6f13fb5e2..e958cb3d1b31 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -13,6 +13,13 @@ model = "TI DRA762 EVM"; compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"; + aliases { + display0 = &hdmi0; + + sound0 = &sound0; + sound1 = &hdmi; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; @@ -116,6 +123,54 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>, /* gpio7_30, CT CP HPD */ + <&gpio7 31 GPIO_ACTIVE_HIGH>, /* gpio7_31, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &i2c1 { @@ -317,6 +372,27 @@ }; }; +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + &cpu0 { vdd-supply = <&buck10_reg>; }; @@ -411,6 +487,23 @@ phy-supply = <&ldo3_reg>; }; +&dss { + status = "ok"; + vdda_video-supply = <&ldo5_reg>; +}; + +&hdmi { + status = "ok"; + + vdda-supply = <&ldo1_reg>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; + &qspi { spi-max-frequency = <96000000>; m25p80@0 { @@ -447,3 +540,11 @@ max-bitrate = <5000000>; }; }; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index cdcba3f561c4..2f7539afef2b 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -41,6 +41,48 @@ }; +&l4_per3 { + target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1b0000 0x4>, + <0x1b0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b0000 0x10000>; + + cal: cal@0 { + compatible = "ti,dra76-cal"; + reg = <0x0000 0x400>, + <0x0800 0x40>, + <0x0900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0x6dc>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; +}; + /* MCAN interrupts are hard-wired to irqs 67, 68 */ &crossbar_mpu { ti,irqs-skip = <10 67 68 133 139 140>; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index ccf0fd477cf9..55cef4cac5f1 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl"; @@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core { @@ -1720,6 +1734,20 @@ }; }; + cam_cm: cam-cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x100>; + + cam_clkctrl: cam-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x2c>; + #clock-cells = <2>; + }; + }; + dss_cm: dss-cm@1100 { compatible = "ti,omap4-cm"; reg = <0x1100 0x100>; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index 936ad010c83a..e39eee628afd 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -27,11 +27,12 @@ compatible = "motorola,cpcap-battery"; interrupts-extended = < &cpcap 6 0 &cpcap 5 0 &cpcap 3 0 - &cpcap 20 0 &cpcap 54 0 + &cpcap 20 0 &cpcap 54 0 &cpcap 57 0 >; interrupt-names = "eol", "lowbph", "lowbpl", - "chrgcurr1", "battdetb"; + "chrgcurr1", "battdetb", + "cccal"; io-channels = <&cpcap_adc 0 &cpcap_adc 1 &cpcap_adc 5 &cpcap_adc 6>; io-channel-names = "battdetb", "battp", diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 71e7ea903eb5..85665506f4f8 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -249,6 +249,13 @@ }; }; +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + &i2c1 { tmp105@48 { compatible = "ti,tmp105"; @@ -440,6 +447,13 @@ >; }; + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts new file mode 100644 index 000000000000..93ffeddada1e --- /dev/null +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de> + */ +/dts-v1/; + +#include "dm3725.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Amazon Echo (first generation)"; + compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0xc600000>; /* 198 MB */ + }; + + vcc5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc1v8: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <40>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + + mute-button { + label = "mute"; + linux,code = <KEY_MUTE>; + gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */ + wakeup-source; + }; + + help-button { + label = "help"; + linux,code = <KEY_HELP>; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */ + wakeup-source; + }; + }; + + rotary: rotary-encoder { + compatible = "rotary-encoder"; + gpios = < + &gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */ + &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */ + >; + linux,axis = <REL_X>; + rotary-encoder,relative-axis; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + + lp5523A: lp5523A@32 { + compatible = "national,lp5523"; + label = "q1"; + reg = <0x32>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; + + lp5523B: lp5523B@33 { + compatible = "national,lp5523"; + label = "q3"; + reg = <0x33>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; + + lp5523C: lp5523C@34 { + compatible = "national,lp5523"; + label = "q4"; + reg = <0x34>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; + + lp5523D: lp552D@35 { + compatible = "national,lp5523"; + label = "q2"; + reg = <0x35>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; +}; + +#include "tps65910.dtsi" + +&omap3_pmx_core { + tps_pins: pinmux_tps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ + >; + }; +}; + +&omap3_pmx_core2 { + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; +}; + +&mmc1 { + status = "okay"; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc_reg>; +}; + +&mmc2 { + status = "okay"; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc_reg>; +}; + +&mmc3 { + status = "okay"; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + non-removable; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + vmmc-supply = <&vcc3v3>; + vqmmc-supply = <&vcc1v8>; +}; + +&tps { + pinctrl-names = "default"; + pinctrl-0 = <&tps_pins>; + + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + ti,en-ck32k-xtal; + ti,system-power-controller; + + vcc1-supply = <&vcc5v>; + vcc2-supply = <&vcc5v>; + vcc3-supply = <&vcc5v>; + vcc4-supply = <&vcc5v>; + vcc5-supply = <&vcc5v>; + vcc6-supply = <&vcc5v>; + vcc7-supply = <&vcc5v>; + vccio-supply = <&vcc5v>; + + regulators { + + vio_reg: regulator@1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-name = "vdd_dsp"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; +}; |