Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

1 files changed, 166 insertions, 11 deletions

diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 26de31578701..bbfcbaca0b36 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -42,6 +42,8 @@
 
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32h7-clks.h>
+#include <dt-bindings/mfd/stm32h7-rcc.h>
 
 / {
 	clocks {
@@ -51,10 +53,16 @@
 			clock-frequency = <0>;
 		};
 
-		timer_clk: timer-clk {
+		clk_lse: clk-lse {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <125000000>;
+			clock-frequency = <32768>;
+		};
+
+		clk_i2s: i2s_ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
 		};
 	};
 
@@ -63,7 +71,33 @@
 			compatible = "st,stm32-timer";
 			reg = <0x40000c00 0x400>;
 			interrupts = <50>;
-			clocks = <&timer_clk>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+		lptimer1: timer@40002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40002400 0x400>;
+			clocks = <&rcc LPTIM1_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
 		};
 
 		usart2: serial@40004400 {
@@ -71,13 +105,13 @@
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
 			status = "disabled";
-			clocks = <&timer_clk>;
+			clocks = <&rcc USART2_CK>;
 		};
 
 		dac: dac@40007400 {
 			compatible = "st,stm32h7-dac-core";
 			reg = <0x40007400 0x400>;
-			clocks = <&timer_clk>;
+			clocks = <&rcc DAC12_CK>;
 			clock-names = "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -103,8 +137,7 @@
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
 			status = "disabled";
-			clocks = <&timer_clk>;
-
+			clocks = <&rcc USART1_CK>;
 		};
 
 		dma1: dma@40020000 {
@@ -118,9 +151,10 @@
 				     <16>,
 				     <17>,
 				     <47>;
-			clocks = <&timer_clk>;
+			clocks = <&rcc DMA1_CK>;
 			#dma-cells = <4>;
 			st,mem2mem;
+			dma-requests = <8>;
 			status = "disabled";
 		};
 
@@ -135,17 +169,28 @@
 				     <68>,
 				     <69>,
 				     <70>;
-			clocks = <&timer_clk>;
+			clocks = <&rcc DMA2_CK>;
 			#dma-cells = <4>;
 			st,mem2mem;
+			dma-requests = <8>;
 			status = "disabled";
 		};
 
+		dmamux1: dma-router@40020800 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x40020800 0x1c>;
+			#dma-cells = <3>;
+			dma-channels = <16>;
+			dma-requests = <128>;
+			dma-masters = <&dma1 &dma2>;
+			clocks = <&rcc DMA1_CK>;
+		};
+
 		adc_12: adc@40022000 {
 			compatible = "st,stm32h7-adc-core";
 			reg = <0x40022000 0x400>;
 			interrupts = <18>;
-			clocks = <&timer_clk>;
+			clocks = <&rcc ADC12_CK>;
 			clock-names = "bus";
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -172,11 +217,121 @@
 			};
 		};
 
+		mdma1: dma@52000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x52000000 0x1000>;
+			interrupts = <122>;
+			clocks = <&rcc MDMA_CK>;
+			#dma-cells = <5>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+		};
+
+		lptimer2: timer@58002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002400 0x400>;
+			clocks = <&rcc LPTIM2_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				status = "disabled";
+			};
+
+			trigger@1 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		lptimer3: timer@58002800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002800 0x400>;
+			clocks = <&rcc LPTIM3_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				status = "disabled";
+			};
+
+			trigger@2 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		lptimer4: timer@58002c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002c00 0x400>;
+			clocks = <&rcc LPTIM4_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@58003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58003000 0x400>;
+			clocks = <&rcc LPTIM5_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				status = "disabled";
+			};
+		};
+
+		vrefbuf: regulator@58003C00 {
+			compatible = "st,stm32-vrefbuf";
+			reg = <0x58003C00 0x8>;
+			clocks = <&rcc VREF_CK>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <2500000>;
+			status = "disabled";
+		};
+
+		rcc: reset-clock-controller@58024400 {
+			compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+			reg = <0x58024400 0x400>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+			st,syscfg = <&pwrcfg>;
+		};
+
+		pwrcfg: power-config@58024800 {
+			compatible = "syscon";
+			reg = <0x58024800 0x400>;
+		};
+
 		adc_3: adc@58026000 {
 			compatible = "st,stm32h7-adc-core";
 			reg = <0x58026000 0x400>;
 			interrupts = <127>;
-			clocks = <&timer_clk>;
+			clocks = <&rcc ADC3_CK>;
 			clock-names = "bus";
 			interrupt-controller;
 			#interrupt-cells = <1>;