diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2019-11-26 15:31:16 +0300 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2019-12-09 16:45:01 +0300 |
| commit | 27e7c033d3b4101bc3b9a344265de5ae89e09b42 (patch) | |
| tree | 0fd21cf5e56b9a2653e586f941c8f09a91f370e6 /arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | |
| parent | b2ee5877508b491ce7d18fc50b2c7b670aef1b79 (diff) | |
| download | linux-27e7c033d3b4101bc3b9a344265de5ae89e09b42.tar.xz | |
ARM: dts: ux500: Drop pulls on I2C buses
The I2C block in the Ux500 uses internal pull-ups on the
SoC, in fact it has to: in HS mode, the I2C block will need
to autonomously take control over the pull-up line to do
its job. This can be clearly seen from the SoC manual which
states that the silicon has a line named "en_cspu_hs" which
enables current source pull-up for high speed mode. Another
hint is that the vendor code tree never enabled the pull
up on these lines, despite being deployed on boards that
lack external pull-up resistors.
Tested on the Ux500 reference designs without any problems.
Cc: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191126123116.56244-1-linus.walleij@linaro.org
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi index e85a08ad2ea7..7bf7a2d34cbc 100644 --- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi @@ -130,7 +130,7 @@ }; default_cfg1 { pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&in_pu>; + ste,config = <&in_nopull>; }; }; @@ -150,7 +150,7 @@ }; default_cfg1 { pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&in_pu>; + ste,config = <&in_nopull>; }; }; @@ -170,7 +170,7 @@ }; default_cfg1 { pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&in_pu>; + ste,config = <&in_nopull>; }; }; @@ -190,7 +190,7 @@ }; default_cfg1 { pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&in_pu>; + ste,config = <&in_nopull>; }; }; @@ -214,7 +214,7 @@ }; default_cfg1 { pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&in_pu>; + ste,config = <&in_nopull>; }; }; |