Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

1 files changed, 363 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
new file mode 100644
index 000000000000..635a16a64cb4
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/berlin2q.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
+	compatible = "marvell,berlin2q", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <3>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+		interrupt-parent = <&gic>;
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-level = <2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			clocks = <&chip CLKID_TWD>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				interrupts = <8>;
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio4: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			gpio5: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2q-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			uart0: uart@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: uart@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sysctrl: pin-controller@d000 {
+				compatible = "marvell,berlin2q-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM12";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM14";
+					function = "uart1";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};