ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 121 deletions

diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
deleted file mode 100644
index 551300fd7746..000000000000
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * at91-gatwick.dts - Device Tree file for the Gatwick board
- *
- *  Copyright (C) 2018 Laird
- *
- */
-/dts-v1/;
-#include "at91-wb50n.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Laird Workgroup Bridge 50N - Project Gatwick";
-	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-ethernet {
-			label = "gatwick:yellow:ethernet";
-			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-wifi {
-			label = "gatwick:green:wifi";
-			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-ble {
-			label = "gatwick:blue:ble";
-			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-lora {
-			label = "gatwick:orange:lora";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-blank {
-			label = "gatwick:green:blank";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led-user {
-			label = "gatwick:yellow:user";
-			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&pinctrl {
-	board {
-		pinctrl_key_gpio: key_gpio_0 {
-		  atmel,pins =
-			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
-	  };
-	};
-};
-
-&mmc0 {
-	status = "okay";
-};
-
-&macb1 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-/* FTDI USART */
-&usart0 {
-	status = "okay";
-};
-
-/* GPS USART */
-&usart1 {
-	pinctrl-0 = <&pinctrl_usart1>;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	spidev@0 {
-		compatible = "semtech,sx1301";
-		reg = <0>;
-		spi-max-frequency = <8000000>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-	/delete-property/atmel,oc-gpio;
-};
-
-&usb2 {
-	status = "okay";
-};