summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/am4372.dtsi
diff options
context:
space:
mode:
authorPekon Gupta <pekon@ti.com>2014-02-05 17:28:34 +0400
committerTony Lindgren <tony@atomide.com>2014-03-02 22:15:54 +0400
commitf68e355c86cff91e5266cf937ea24fcba0641900 (patch)
tree96409ee59c365d4cf0daf600ecfd7ab67bb9dd0a /arch/arm/boot/dts/am4372.dtsi
parentc06c52701695911eb594f15a2560cf55ae97e313 (diff)
downloadlinux-f68e355c86cff91e5266cf937ea24fcba0641900.tar.xz
ARM: dts: am43xx: add support for parallel NAND flash
This patch: - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi) - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB) present on following boards: am43x-epos-evm: On this board, NAND Flash control lines are muxed with QSPI, Thus only one of the two can be used at a time. Selection is controlled by: (a) dynamically driving following GPIO pin from software GPMC_A0(GPIO) == 0 NAND is selected (default) GPMC_A0(GPIO) == 1 eMMC is selected Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/am4372.dtsi')
-rw-r--r--arch/arm/boot/dts/am4372.dtsi24
1 files changed, 24 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index eb74ab82aa94..a4555bedd713 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -701,6 +701,30 @@
<&edma 11>;
dma-names = "tx", "rx";
};
+
+ elm: elm@48080000 {
+ compatible = "ti,am3352-elm";
+ reg = <0x48080000 0x2000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "elm";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ clocks = <&l3s_gclk>;
+ clock-names = "fck";
+ reg = <0x50000000 0x2000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
};
};