Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Olof Johansson:
 "We were expecting to sit on this branch through most of the merge
  window since the contents was merged into our tree late, but we ended
  up sitting on all of our contents so it can go in with the rest.

  The contents here is:

   - a large branch of cleanups of the CM/PRM blocks on OMAP.

   - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.

   - a branch with DT updates for Freescale i.MX.  including some
     shuffling from .dts to .dtsi (include) files that causes a little
     churn"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
  ARM: OMAP4+: control: add support for initializing control module via DT
  ARM: dts: dra7: add minimal l4 bus layout with control module support
  ARM: dts: omap5: add minimal l4 bus layout with control module support
  ARM: OMAP4+: control: remove support for legacy pad read/write
  ARM: OMAP4: display: convert display to use syscon for dsi muxing
  ARM: dts: omap4: add minimal l4 bus layout with control module support
  ARM: dts: am4372: add minimal l4 bus layout with control module support
  ARM: dts: am43xx-epos-evm: fix pinmux node layout
  ARM: dts: am33xx: add minimal l4 bus layout with control module support
  ARM: dts: omap3: add minimal l4 bus layout with control module support
  ARM: dts: omap24xx: add minimal l4 bus layout with control module support
  ARM: OMAP2+: control: add syscon support for register accesses
  ARM: OMAP2+: id: cache omap_type value
  ARM: OMAP2+: control: remove API for getting control module base address
  ARM: OMAP2+: clock: add low-level support for regmap
  ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
  ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
  ARM: OMAP2+: CM: move SoC specific init calls within a generic API
  ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
  ...

1 files changed, 49 insertions, 36 deletions

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1b7bda8c14b1..c80a3e233792 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -66,22 +66,6 @@
 		cache-level = <2>;
 	};
 
-	am43xx_control_module: control_module@4a002000 {
-		compatible = "syscon";
-		reg = <0x44e10000 0x7f4>;
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		compatible = "ti,am437-padconf", "pinctrl-single";
-		reg = <0x44e10800 0x31c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
 	ocp {
 		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
@@ -93,29 +77,58 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
-		prcm: prcm@44df0000 {
-			compatible = "ti,am4-prcm";
-			reg = <0x44df0000 0x11000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
+		l4_wkup: l4_wkup@44c00000 {
+			compatible = "ti,am4-l4-wkup", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44c00000 0x287000>;
 
-			prcm_clockdomains: clockdomains {
-			};
-		};
+			prcm: prcm@1f0000 {
+				compatible = "ti,am4-prcm";
+				reg = <0x1f0000 0x11000>;
 
-		scrm: scrm@44e10000 {
-			compatible = "ti,am4-scrm";
-			reg = <0x44e10000 0x2000>;
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
+				prcm_clockdomains: clockdomains {
+				};
 			};
 
-			scrm_clockdomains: clockdomains {
+			scm: scm@210000 {
+				compatible = "ti,am4-scm", "simple-bus";
+				reg = <0x210000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x210000 0x4000>;
+
+				am43xx_pinmux: pinmux@800 {
+					compatible = "ti,am437-padconf",
+						     "pinctrl-single";
+					reg = <0x800 0x31c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0xffffffff>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
 			};
 		};
 
@@ -942,7 +955,7 @@
 			clocks = <&dcan0_fck>;
 			clock-names = "fck";
 			reg = <0x481cc000 0x2000>;
-			syscon-raminit = <&am43xx_control_module 0x644 0>;
+			syscon-raminit = <&scm_conf 0x644 0>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -953,7 +966,7 @@
 			clocks = <&dcan1_fck>;
 			clock-names = "fck";
 			reg = <0x481d0000 0x2000>;
-			syscon-raminit = <&am43xx_control_module 0x644 1>;
+			syscon-raminit = <&scm_conf 0x644 1>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};