Merge tag 'wireless-drivers-next-2020-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.7

First set of patches for v5.7. Lots of mt76 patches as they missed the
v5.6 deadline and hence they were postponed to the next version.
Otherwise nothing special standing out.

mt76

Major changes:

* dual-band concurrent support for MT7615

* fixes for rx path race conditions

* coverage class support for MT7615

* beacon fixes for USB devices

* MT7615 LED support

* set_antenna support for MT7615

* tracing improvements

* preparation for supporting new USB devices

* tx power fixes

brcmfmac

* support BRCM 4364 found in MacBook Pro 15,2
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 28 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
index 7e675dafc256..3a76d8faaaed 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
@@ -4,17 +4,27 @@ This node provides properties for configuring the MediaTek mt76xx wireless
 device. The node is expected to be specified as a child node of the PCI
 controller to which the wireless chip is connected.
 
-Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC.
-For SoC, use the compatible string "mediatek,mt7628-wmac" and the following
-properties:
+Alternatively, it can specify the wireless part of the MT7628/MT7688 or
+MT7622 SoC. For SoC, use the following compatible strings:
+
+compatible:
+- "mediatek,mt7628-wmac" for MT7628/MT7688
+- "mediatek,mt7622-wmac" for MT7622
 
+properties:
 - reg: Address and length of the register set for the device.
 - interrupts: Main device interrupt
 
+MT7622 specific properties:
+- power-domains: phandle to the power domain that the WMAC is part of
+- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node
+
 Optional properties:
 
 - ieee80211-freq-limit: See ieee80211.txt
 - mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data
+- big-endian: if the radio eeprom partition is written in big-endian, specify
+  this property
 
 The MAC address can as well be set with corresponding optional properties
 defined in net/ethernet.txt.
@@ -31,6 +41,7 @@ Optional nodes:
 			reg = <0x0000 0 0 0 0>;
 			ieee80211-freq-limit = <5000000 6000000>;
 			mediatek,mtd-eeprom = <&factory 0x8000>;
+			big-endian;
 
 			led {
 				led-sources = <2>;
@@ -50,3 +61,15 @@ wmac: wmac@10300000 {
 
 	mediatek,mtd-eeprom = <&factory 0x0000>;
 };
+
+MT7622 example:
+
+wmac: wmac@18000000 {
+	compatible = "mediatek,mt7622-wmac";
+	reg = <0 0x18000000 0 0x100000>;
+	interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+	mediatek,infracfg = <&infracfg>;
+
+	power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index f38950560982..88fd28d15eac 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -9,11 +9,12 @@ Required properties:
 - spi-max-frequency : Maximum SPI clocking speed of device in Hz
 - interrupts :        Should contain interrupt line
 - vio-supply :        phandle to regulator providing VIO
-- ti,power-gpio :     GPIO connected to chip's PMEN pin
 
 Optional properties:
 - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
                          provides configuration data (calibration, MAC, ...)
+- ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
+			 SPI mode
 - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
   for optional SPI connection related properties,