Backmerge tag 'v5.13-rc7' into drm-next

Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.

14 files changed, 66 insertions, 31 deletions

diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 7ca8df5451d4..68b21395a743 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -1458,11 +1458,22 @@ unprivileged_bpf_disabled
 =========================
 
 Writing 1 to this entry will disable unprivileged calls to ``bpf()``;
-once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return
-``-EPERM``.
+once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` or ``CAP_BPF``
+will return ``-EPERM``. Once set to 1, this can't be cleared from the
+running kernel anymore.
 
-Once set, this can't be cleared.
+Writing 2 to this entry will also disable unprivileged calls to ``bpf()``,
+however, an admin can still change this setting later on, if needed, by
+writing 0 or 1 to this entry.
 
+If ``BPF_UNPRIV_DEFAULT_OFF`` is enabled in the kernel config, then this
+entry will default to 2 instead of 0.
+
+= =============================================================
+0 Unprivileged calls to ``bpf()`` are enabled
+1 Unprivileged calls to ``bpf()`` are disabled without recovery
+2 Unprivileged calls to ``bpf()`` are disabled
+= =============================================================
 
 watchdog
 ========
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 32509b98142e..92b49bc37939 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -149,6 +149,17 @@ properties:
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
+  sink-vdos-v1:
+    description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
+      providing additional information corresponding to the product, the detailed bit
+      definitions and the order of each VDO can be found in
+      "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover
+      Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in
+      dt-bindings/usb/pd.h.
+    minItems: 3
+    maxItems: 6
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
   op-sink-microwatt:
     description: Sink required operating power in microwatt, if source can't
       offer the power, Capability Mismatch is set. Required for power sink and
@@ -207,6 +218,10 @@ properties:
       SNK_READY for non-pd link.
     type: boolean
 
+dependencies:
+  sink-vdos-v1: [ 'sink-vdos' ]
+  sink-vdos: [ 'sink-vdos-v1' ]
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
index 33ee575bb09d..926be9a29044 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
@@ -49,7 +49,7 @@ examples:
         #size-cells = <0>;
 
         adc@48 {
-            comatible = "ti,ads7828";
+            compatible = "ti,ads7828";
             reg = <0x48>;
             vref-supply = <&vref>;
             ti,differential-input;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 7b553d559c83..98c6fcf7bf26 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -46,6 +46,13 @@ properties:
     description: |
       I2C bus timeout in microseconds
 
+  fsl,i2c-erratum-a004447:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicates the presence of QorIQ erratum A-004447, which
+      says that the standard i2c recovery scheme mechanism does
+      not work and an alternate implementation is needed.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index ce505a7c006a..9cd56ff2c316 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -67,9 +67,7 @@ properties:
     maxItems: 1
 
   clock-names:
-    maxItems: 1
-    items:
-      - const: fck
+    const: fck
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 8ce5ed8a58dd..c101a1ec846e 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -10,7 +10,7 @@ allOf:
   - $ref: ethernet-controller.yaml#
 
 maintainers:
-  - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index db61f0731a20..2e35aeaa8781 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -57,7 +57,7 @@ patternProperties:
           rate
 
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandle of the CPU DAI
 
     patternProperties:
@@ -71,7 +71,7 @@ patternProperties:
 
         properties:
           sound-dai:
-            $ref: /schemas/types.yaml#/definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle-array
             description: phandle of the codec DAI
 
         required:
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index d09c6355e22d..51c7622dc20b 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -72,7 +72,7 @@ examples:
 
             mux-controls = <&mux>;
 
-            spi-flash@0 {
+            flash@0 {
                 compatible = "jedec,spi-nor";
                 reg = <0>;
                 spi-max-frequency = <40000000>;
diff --git a/Documentation/driver-api/usb/usb.rst b/Documentation/driver-api/usb/usb.rst
index 820e867af45a..2c94ff2f4385 100644
--- a/Documentation/driver-api/usb/usb.rst
+++ b/Documentation/driver-api/usb/usb.rst
@@ -123,6 +123,8 @@ are in ``drivers/usb/common/common.c``.
 In addition, some functions useful for creating debugging output are
 defined in ``drivers/usb/common/debug.c``.
 
+.. _usb_header:
+
 Host-Side Data Types and Macros
 ===============================
 
diff --git a/Documentation/riscv/vm-layout.rst b/Documentation/riscv/vm-layout.rst
index 329d32098af4..b7f98930d38d 100644
--- a/Documentation/riscv/vm-layout.rst
+++ b/Documentation/riscv/vm-layout.rst
@@ -58,6 +58,6 @@ RISC-V Linux Kernel SV39
                                                               |
   ____________________________________________________________|____________________________________________________________
                     |            |                  |         |
-   ffffffff00000000 |   -4    GB | ffffffff7fffffff |    2 GB | modules
-   ffffffff80000000 |   -2    GB | ffffffffffffffff |    2 GB | kernel, BPF
+   ffffffff00000000 |   -4    GB | ffffffff7fffffff |    2 GB | modules, BPF
+   ffffffff80000000 |   -2    GB | ffffffffffffffff |    2 GB | kernel
   __________________|____________|__________________|_________|____________________________________________________________
diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst
index bd9165241b6c..6efb41cc8072 100644
--- a/Documentation/userspace-api/seccomp_filter.rst
+++ b/Documentation/userspace-api/seccomp_filter.rst
@@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)``  (or ``poll()``) on a
 seccomp notification fd to receive a ``struct seccomp_notif``, which contains
 five members: the input length of the structure, a unique-per-filter ``id``,
 the ``pid`` of the task which triggered this request (which may be 0 if the
-task is in a pid ns not visible from the listener's pid namespace), a ``flags``
-member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
-whether or not the notification is a result of a non-fatal signal, and the
-``data`` passed to seccomp. Userspace can then make a decision based on this
-information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
-response, indicating what should be returned to userspace. The ``id`` member of
-``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
-seccomp_notif``.
+task is in a pid ns not visible from the listener's pid namespace). The
+notification also contains the ``data`` passed to seccomp, and a filters flag.
+The structure should be zeroed out prior to calling the ioctl.
+
+Userspace can then make a decision based on this information about what to do,
+and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be
+returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should
+be the same ``id`` as in ``struct seccomp_notif``.
 
 It is worth noting that ``struct seccomp_data`` contains the values of register
 arguments to the syscall, but does not contain pointers to memory. The task's
diff --git a/Documentation/virt/kvm/mmu.rst b/Documentation/virt/kvm/mmu.rst
index 5bfe28b0728e..20d85daed395 100644
--- a/Documentation/virt/kvm/mmu.rst
+++ b/Documentation/virt/kvm/mmu.rst
@@ -171,8 +171,8 @@ Shadow pages contain the following information:
     shadow pages) so role.quadrant takes values in the range 0..3.  Each
     quadrant maps 1GB virtual address space.
   role.access:
-    Inherited guest access permissions in the form uwx.  Note execute
-    permission is positive, not negative.
+    Inherited guest access permissions from the parent ptes in the form uwx.
+    Note execute permission is positive, not negative.
   role.invalid:
     The page is invalid and should not be used.  It is a root page that is
     currently pinned (by a cpu hardware register pointing to it); once it is
diff --git a/Documentation/virt/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst
index 5feb3706a7ae..af1b37441e0a 100644
--- a/Documentation/virt/kvm/vcpu-requests.rst
+++ b/Documentation/virt/kvm/vcpu-requests.rst
@@ -118,10 +118,12 @@ KVM_REQ_MMU_RELOAD
   necessary to inform each VCPU to completely refresh the tables.  This
   request is used for that.
 
-KVM_REQ_PENDING_TIMER
+KVM_REQ_UNBLOCK
 
-  This request may be made from a timer handler run on the host on behalf
-  of a VCPU.  It informs the VCPU thread to inject a timer interrupt.
+  This request informs the vCPU to exit kvm_vcpu_block.  It is used for
+  example from timer handlers that run on the host on behalf of a vCPU,
+  or in order to update the interrupt routing and ensure that assigned
+  devices will wake up the vCPU.
 
 KVM_REQ_UNHALT
 
diff --git a/Documentation/vm/slub.rst b/Documentation/vm/slub.rst
index 03f294a638bd..d3028554b1e9 100644
--- a/Documentation/vm/slub.rst
+++ b/Documentation/vm/slub.rst
@@ -181,7 +181,7 @@ SLUB Debug output
 Here is a sample of slub debug output::
 
  ====================================================================
- BUG kmalloc-8: Redzone overwritten
+ BUG kmalloc-8: Right Redzone overwritten
  --------------------------------------------------------------------
 
  INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
@@ -189,10 +189,10 @@ Here is a sample of slub debug output::
  INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
  INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
 
- Bytes b4 0xc90f6d10:  00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
-   Object 0xc90f6d20:  31 30 31 39 2e 30 30 35                         1019.005
-  Redzone 0xc90f6d28:  00 cc cc cc                                     .
-  Padding 0xc90f6d50:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
+ Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object   (0xc90f6d20): 31 30 31 39 2e 30 30 35                         1019.005
+ Redzone  (0xc90f6d28): 00 cc cc cc                                     .
+ Padding  (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
 
    [<c010523d>] dump_trace+0x63/0x1eb
    [<c01053df>] show_trace_log_lvl+0x1a/0x2f