diff options
| author | David S. Miller <davem@davemloft.net> | 2015-10-20 16:08:27 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-10-20 16:08:27 +0300 |
| commit | 26440c835f8b1a491e2704118ac55bf87334366c (patch) | |
| tree | 3c2d23b59fd49b252fdbf6c09efc41b354933fc6 /Documentation | |
| parent | 371f1c7e0d854796adc622cc3bacfcc5fc638db1 (diff) | |
| parent | 1099f86044111e9a7807f09523e42d4c9d0fb781 (diff) | |
| download | linux-26440c835f8b1a491e2704118ac55bf87334366c.tar.xz | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
5 files changed, 11 insertions, 6 deletions
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt index 0d5bc46dc167..ad6949bff2e3 100644 --- a/Documentation/device-mapper/snapshot.txt +++ b/Documentation/device-mapper/snapshot.txt @@ -41,9 +41,13 @@ useless and be disabled, returning errors. So it is important to monitor the amount of free space and expand the <COW device> before it fills up. <persistent?> is P (Persistent) or N (Not persistent - will not survive -after reboot). -The difference is that for transient snapshots less metadata must be -saved on disk - they can be kept in memory by the kernel. +after reboot). O (Overflow) can be added as a persistent store option +to allow userspace to advertise its support for seeing "Overflow" in the +snapshot status. So supported store types are "P", "PO" and "N". + +The difference between persistent and transient is with transient +snapshots less metadata must be saved on disk - they can be kept in +memory by the kernel. * snapshot-merge <origin> <COW device> <persistent> <chunksize> diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt index 635a3b036630..8d91ba9ff2fd 100644 --- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt @@ -25,7 +25,7 @@ Example: /* Cypress Gen3 touchpad */ touchpad@67 { compatible = "cypress,cyapa"; - reg = <0x24>; + reg = <0x67>; interrupt-parent = <&gpio>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ wakeup-source; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 8f771441be60..705075da2f10 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car Gen2) + (default is 64) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 64a4ca6cf96f..7d48f63db44e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -5,6 +5,7 @@ Required properties: - "renesas,usbhs-r8a7790" - "renesas,usbhs-r8a7791" - "renesas,usbhs-r8a7794" + - "renesas,usbhs-r8a7795" - reg: Base address and length of the register for the USBHS - interrupts: Interrupt specifier for the USBHS - clocks: A list of phandle + clock specifier pairs diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index b85d000faeb4..c51f1146f3bd 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is ABS_MT_POSITION_X := T_X ABS_MT_POSITION_Y := T_Y ABS_MT_TOOL_X := C_X - ABS_MT_TOOL_X := C_Y + ABS_MT_TOOL_Y := C_Y Unfortunately, there is not enough information to specify both the touching ellipse and the tool ellipse, so one has to resort to approximations. One |