Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 4.2-rc1.  As is normal these days, the
  majority of changes are in the gadget drivers, with a bunch of other
  small driver changes.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits)
  usb: dwc3: Use ASCII space in Kconfig
  usb: chipidea: add work-around for Marvell HSIC PHY startup
  usb: chipidea: allow multiple instances to use default ci_default_pdata
  dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
  phy: add Marvell HSIC 28nm PHY
  phy: Add Marvell USB 2.0 OTG 28nm PHY
  dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
  USB: ssb: use devm_kzalloc
  USB: ssb: fix error handling in ssb_hcd_create_pdev()
  usb: isp1760: check for null return from kzalloc
  cdc-acm: Add support of ATOL FPrint fiscal printers
  usb: chipidea: usbmisc_imx: Remove unneeded semicolon
  USB: usbtmc: add device quirk for Rigol DS6104
  USB: serial: mos7840: Use setup_timer
  phy: twl4030-usb: add ABI documentation
  phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
  phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
  phy: twl4030-usb: make runtime pm more reliable.
  drivers:usb:fsl: Fix compilation error for fsl ehci drv
  usb: renesas_usbhs: Don't disable the pipe if Control write status stage
  ...

17 files changed, 127 insertions, 78 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-twl4030-usb b/Documentation/ABI/testing/sysfs-platform-twl4030-usb
new file mode 100644
index 000000000000..512c51be64ae
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-twl4030-usb
@@ -0,0 +1,8 @@
+What: /sys/bus/platform/devices/*twl4030-usb/vbus
+Description:
+	Read-only status reporting if VBUS (approx 5V)
+	is being supplied by the USB bus.
+
+	Possible values: "on", "off".
+
+	Changes are notified via select/poll.
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
new file mode 100644
index 000000000000..7f81ef90146a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
@@ -0,0 +1,40 @@
+* Broadcom SATA3 PHY for STB
+
+Required properties:
+- compatible: should be one or more of
+     "brcm,bcm7445-sata-phy"
+     "brcm,phy-sata3"
+- address-cells: should be 1
+- size-cells: should be 0
+- reg: register range for the PHY PCB interface
+- reg-names: should be "phy"
+
+Sub-nodes:
+  Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+- phy-cells: generic PHY binding; must be 0
+Optional:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+
+
+Example:
+
+	sata-phy@f0458100 {
+		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
+		reg-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata-phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		sata-phy@1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
new file mode 100644
index 000000000000..660a13ca90b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
@@ -0,0 +1,18 @@
+* Marvell PXA1928 USB and HSIC PHYs
+
+Required properties:
+- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
+- reg: base address and length of the registers
+- clocks - A single clock. From common clock binding.
+- #phys-cells: should be 0. From commmon phy binding.
+- resets: reference to the reset controller
+
+Example:
+
+	usbphy: phy@7000 {
+		compatible = "marvell,pxa1928-usb-phy";
+		reg = <0x7000 0xe0>;
+		clocks = <&apmu_clocks PXA1928_CLK_USB>;
+		#phy-cells = <0>;
+	};
+
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index 00fc52a034b7..d564ba4f1cf6 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -6,6 +6,7 @@ This file provides information on what the device node for the R-Car generation
 Required properties:
 - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
+	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
 - reg: offset and length of the register block.
 - #address-cells: number of address cells for the USB channel subnodes, must
 		  be <1>.
diff --git a/Documentation/devicetree/bindings/power/twl-charger.txt b/Documentation/devicetree/bindings/power/twl-charger.txt
index d5c706216df5..3b4ea1b73b38 100644
--- a/Documentation/devicetree/bindings/power/twl-charger.txt
+++ b/Documentation/devicetree/bindings/power/twl-charger.txt
@@ -1,5 +1,15 @@
 TWL BCI (Battery Charger Interface)
 
+The battery charger needs to interact with the USB phy in order
+to know when charging is permissible, and when there is a connection
+or disconnection.
+
+The choice of phy cannot be configured at a hardware level, so there
+is no value in explicit configuration in device-tree.  Rather
+if there is a sibling of the BCI node which is compatible with
+"ti,twl4030-usb", then that is used to determine when and how
+use USB power for charging.
+
 Required properties:
 - compatible:
   - "ti,twl4030-bci"
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
deleted file mode 100644
index 38a548001e3a..000000000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Freescale i.MX ci13xxx usb controllers
-
-Required properties:
-- compatible: Should be "fsl,imx27-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-- fsl,usbphy: phandle of usb phy that connects to the port
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
-  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
-  property the PORTSC register won't be touched
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Optional properties:
-- fsl,usbmisc: phandler of non-core register device, with one argument
-  that indicate usb controller index
-- vbus-supply: regulator for vbus
-- disable-over-current: disable over current detect
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-- maximum-speed: limit the maximum connection speed to "full-speed".
-- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
-
-Examples:
-usb@02184000 { /* USB OTG */
-	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-	reg = <0x02184000 0x200>;
-	interrupts = <0 43 0x04>;
-	fsl,usbphy = <&usbphy1>;
-	fsl,usbmisc = <&usbmisc 0>;
-	disable-over-current;
-	external-vbus-divider;
-	maximum-speed = "full-speed";
-	tpl-support;
-};
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
deleted file mode 100644
index f2899b550939..000000000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Qualcomm CI13xxx (Chipidea) USB controllers
-
-Required properties:
-- compatible:   should contain "qcom,ci-hdrc"
-- reg:          offset and length of the register set in the memory map
-- interrupts:   interrupt-specifier for the controller interrupt.
-- usb-phy:      phandle for the PHY device
-- dr_mode:      Should be "peripheral"
-
-Examples:
-	gadget@f9a55000 {
-		compatible = "qcom,ci-hdrc";
-		reg = <0xf9a55000 0x400>;
-		dr_mode = "peripheral";
-		interrupts = <0 134 0>;
-		usb-phy = <&usbphy0>;
-	};
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 27f8b1e5ee46..553e2fae3a76 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -1,15 +1,35 @@
 * USB2 ChipIdea USB controller for ci13xxx
 
 Required properties:
-- compatible: should be "chipidea,usb2"
+- compatible: should be one of:
+	"fsl,imx27-usb"
+	"lsi,zevio-usb"
+	"qcom,ci-hdrc"
+	"chipidea,usb2"
 - reg: base address and length of the registers
 - interrupts: interrupt for the USB controller
 
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched.
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Deprecated properties:
+- usb-phy:      phandle for the PHY device. Use "phys" instead.
+- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead.
+
 Optional properties:
 - clocks: reference to the USB clock
 - phys: reference to the USB PHY
 - phy-names: should be "usb-phy"
 - vbus-supply: reference to the VBUS regulator
+- maximum-speed: limit the maximum connection speed to "full-speed".
+- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
+- fsl,usbmisc: (FSL only) phandler of non-core register device, with one
+  argument that indicate usb controller index
+- disable-over-current: (FSL only) disable over current detect
+- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
deleted file mode 100644
index abbcb2aea38c..000000000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* LSI Zevio USB OTG Controller
-
-Required properties:
-- compatible: Should be "lsi,zevio-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Optional properties:
-- vbus-supply: regulator for vbus
-
-Examples:
-		usb0: usb@b0000000 {
-			reg = <0xb0000000 0x1000>;
-			compatible = "lsi,zevio-usb";
-			interrupts = <8>;
-			vbus-supply = <&vbus_reg>;
-		};
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index f9d70252bbb2..01c71b1258f4 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -49,8 +49,7 @@ st_dwc3: dwc3@8f94000 {
 	st,syscfg	= <&syscfg_core>;
 	resets		= <&powerdown STIH407_USB3_POWERDOWN>,
 			  <&softreset STIH407_MIPHY2_SOFTRESET>;
-	reset-names	= "powerdown",
-			  "softreset";
+	reset-names	= "powerdown", "softreset";
 	#address-cells	= <1>;
 	#size-cells	= <1>;
 	pinctrl-names	= "default";
@@ -62,7 +61,7 @@ st_dwc3: dwc3@8f94000 {
 		reg		= <0x09900000 0x100000>;
 		interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
 		dr_mode		= "host";
-		phys-names      = "usb2-phy", "usb3-phy";
-		phys            = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>;
+		phy-names	= "usb2-phy", "usb3-phy";
+		phys		= <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 5cc364309edb..0815eac5b185 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -38,6 +38,8 @@ Optional properties:
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold
+ - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
+   UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
 
 This is usually a subnode to DWC3 glue to which it is connected.
 
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index 2826f2af503a..bd8d9e753029 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -69,6 +69,17 @@ Optional properties:
                 (no, min, max) where each value represents either a voltage
                 in microvolts or a value corresponding to voltage corner.
 
+- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy
+                and controller driver therefore enables pull-up explicitly
+                before starting controller using usbcmd run/stop bit.
+
+- extcon:       phandles to external connector devices. First phandle
+                should point to external connector, which provide "USB"
+                cable events, the second should point to external connector
+                device, which provide "USB-HOST" cable events. If one of
+                the external connector devices is not required empty <0>
+                phandle should be specified.
+
 Example HSUSB OTG controller device node:
 
     usb@f9a55000 {
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index ddbe304beb21..64a4ca6cf96f 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -4,6 +4,7 @@ Required properties:
   - compatible: Must contain one of the following:
 	- "renesas,usbhs-r8a7790"
 	- "renesas,usbhs-r8a7791"
+	- "renesas,usbhs-r8a7794"
   - reg: Base address and length of the register for the USBHS
   - interrupts: Interrupt specifier for the USBHS
   - clocks: A list of phandle + clock specifier pairs
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
index 0aee0ad3f035..17327a296110 100644
--- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -30,6 +30,9 @@ TWL4030 USB PHY AND COMPARATOR
  - usb_mode : The mode used by the phy to connect to the controller. "1"
    specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
 
+If a sibling node is compatible "ti,twl4030-bci", then it will find
+this device and query it for USB power status.
+
 twl4030-usb {
 	compatible = "ti,twl4030-usb";
 	interrupts = < 10 4 >;
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 0b04fdff9d5a..a12d6012a40f 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -13,6 +13,8 @@ Optional properties:
  - big-endian-desc : boolean, set this for hcds with big-endian descriptors
  - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
  - needs-reset-on-resume : boolean, set this to force EHCI reset after resume
+ - has-transaction-translator : boolean, set this if EHCI have a Transaction
+				Translator built into the root hub.
  - clocks : a list of phandle + clock specifier pairs
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 371361c69a4b..b388c5af9e72 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -76,6 +76,8 @@ struct phy *phy_get(struct device *dev, const char *string);
 struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index);
 
 phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
 be used to get the PHY. In the case of dt boot, the string arguments
@@ -86,7 +88,10 @@ successful PHY get. On driver detach, release function is invoked on
 the the devres data and devres data is freed. phy_optional_get and
 devm_phy_optional_get should be used when the phy is optional. These
 two functions will never return -ENODEV, but instead returns NULL when
-the phy cannot be found.
+the phy cannot be found.Some generic drivers, such as ehci, may use multiple
+phys and for such drivers referencing phy(s) by name(s) does not make sense. In
+this case, devm_of_phy_get_by_index can be used to get a phy reference based on
+the index.
 
 It should be noted that NULL is a valid phy reference. All phy
 consumer calls on the NULL phy become NOPs. That is the release calls,
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
index f45b2bf4b41d..592678009c15 100644
--- a/Documentation/usb/gadget-testing.txt
+++ b/Documentation/usb/gadget-testing.txt
@@ -526,8 +526,6 @@ Except for ifname they can be written to until the function is linked to a
 configuration. The ifname is read-only and contains the name of the interface
 which was assigned by the net core, e. g. usb0.
 
-By default there can be only 1 RNDIS interface in the system.
-
 Testing the RNDIS function
 --------------------------
 
@@ -629,7 +627,7 @@ Function-specific configfs interface
 The function name to use when creating the function directory is "uac2".
 The uac2 function provides these attributes in its function directory:
 
-	chmask - capture channel mask
+	c_chmask - capture channel mask
 	c_srate - capture sampling rate
 	c_ssize - capture sample size (bytes)
 	p_chmask - playback channel mask