diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-11-04 20:41:05 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-11-04 20:41:05 +0300 |
| commit | b0f85fa11aefc4f3e03306b4cd47f113bd57dcba (patch) | |
| tree | 1333d36d99fde3f97210795941fc246f0ad08a75 /Documentation | |
| parent | ccc9d4a6d640cbde05d519edeb727881646cf71b (diff) | |
| parent | f32bfb9a8ca083f8d148ea90ae5ba66f4831836e (diff) | |
| download | linux-b0f85fa11aefc4f3e03306b4cd47f113bd57dcba.tar.xz | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
Diffstat (limited to 'Documentation')
22 files changed, 742 insertions, 48 deletions
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index aac9357d4866..f9b9ad7894f5 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -154,8 +154,9 @@ !Finclude/net/cfg80211.h cfg80211_scan_request !Finclude/net/cfg80211.h cfg80211_scan_done !Finclude/net/cfg80211.h cfg80211_bss -!Finclude/net/cfg80211.h cfg80211_inform_bss_width_frame -!Finclude/net/cfg80211.h cfg80211_inform_bss_width +!Finclude/net/cfg80211.h cfg80211_inform_bss +!Finclude/net/cfg80211.h cfg80211_inform_bss_frame_data +!Finclude/net/cfg80211.h cfg80211_inform_bss_data !Finclude/net/cfg80211.h cfg80211_unlink_bss !Finclude/net/cfg80211.h cfg80211_find_ie !Finclude/net/cfg80211.h ieee80211_bss_get_ie diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index f55aa280d34f..078060a97f95 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -37,6 +37,14 @@ Required properties for ethernet interfaces that have external PHY: Optional properties: - status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok". +- tx-delay: Delay value for RGMII bridge TX clock. + Valid values are between 0 to 7, that maps to + 417, 717, 1020, 1321, 1611, 1913, 2215, 2514 ps + Default value is 4, which corresponds to 1611 ps +- rx-delay: Delay value for RGMII bridge RX clock. + Valid values are between 0 to 7, that maps to + 273, 589, 899, 1222, 1480, 1806, 2147, 2464 ps + Default value is 2, which corresponds to 899 ps Example: menetclk: menetclk { @@ -72,5 +80,7 @@ Example: /* Board-specific peripheral configurations */ &menet { + tx-delay = <4>; + rx-delay = <2>; status = "ok"; }; diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt new file mode 100644 index 000000000000..8ba9ed11d716 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt @@ -0,0 +1,23 @@ +* Broadcom iProc MDIO bus controller + +Required properties: +- compatible: should be "brcm,iproc-mdio" +- reg: address and length of the register set for the MDIO interface +- #size-cells: must be 1 +- #address-cells: must be 0 + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + + enet-gphy@0 { + reg = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt new file mode 100644 index 000000000000..84ed1909df76 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/sun4i_can.txt @@ -0,0 +1,36 @@ +Allwinner A10/A20 CAN controller Device Tree Bindings +----------------------------------------------------- + +Required properties: +- compatible: "allwinner,sun4i-a10-can" +- reg: physical base address and size of the Allwinner A10/A20 CAN register map. +- interrupts: interrupt specifier for the sole interrupt. +- clock: phandle and clock specifier. + +Example +------- + +SoC common .dtsi file: + + can0_pins_a: can0@0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "can"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; +... + can0: can@01c2bc00 { + compatible = "allwinner,sun4i-a10-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <0 26 4>; + clocks = <&apb1_gates 4>; + status = "disabled"; + }; + +Board specific .dts file: + + can0: can@01c2bc00 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index a2cae4eb4a60..4efca560adda 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -30,6 +30,13 @@ Optional properties: - dual_emac : Specifies Switch to act as Dual EMAC - syscon : Phandle to the system control device node, which is the control module device of the am33x +- mode-gpios : Should be added if one/multiple gpio lines are + required to be driven so that cpsw data lines + can be connected to the phy via selective mux. + For example in dra72x-evm, pcf gpio has to be + driven low so that cpsw slave 0 and phy data + lines are connected via mux. + Slave Properties: Required properties: diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 1e97532a0b79..db74f0dc290c 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -57,6 +57,10 @@ Properties: "rgmii-id", as all other connection types are detected by hardware. - fsl,magic-packet : If present, indicates that the hardware supports waking up via magic packet. + - fsl,wake-on-filer : If present, indicates that the hardware supports + waking up by Filer General Purpose Interrupt (FGPI) asserted on the + Rx int line. This is an advanced power management capability allowing + certain packet types (user) defined by filer rules to wake up the system. - bd-stash : If present, indicates that the hardware supports stashing buffer descriptors in the L2. - rx-stash-len : Denotes the number of bytes of a received buffer to stash diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt index 988fc694b663..d1df8a00e1f3 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -32,13 +32,13 @@ Required properties: Required properties: -- compatible: should be "hisilicon,hip04-mdio". +- compatible: should be "hisilicon,mdio". - Inherits from MDIO bus node binding [2] [2] Documentation/devicetree/bindings/net/phy.txt Example: mdio { - compatible = "hisilicon,hip04-mdio"; + compatible = "hisilicon,mdio"; reg = <0x28f1000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt new file mode 100644 index 000000000000..80411b2f0490 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt @@ -0,0 +1,49 @@ +Hisilicon DSA Fabric device controller + +Required properties: +- compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2". + "hisilicon,hns-dsaf-v1" is for hip05. + "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612. +- dsa-name: dsa fabric name who provide this interface. + should be "dsafX", X is the dsaf id. +- mode: dsa fabric mode string. only support one of dsaf modes like these: + "2port-64vf", + "6port-16rss", + "6port-16vf". +- interrupt-parent: the interrupt parent of this device. +- interrupts: should contain the DSA Fabric and rcb interrupt. +- reg: specifies base physical address(es) and size of the device registers. + The first region is external interface control register base and size. + The second region is SerDes base register and size. + The third region is the PPE register base and size. + The fourth region is dsa fabric base register and size. + The fifth region is cpld base register and size, it is not required if do not use cpld. +- phy-handle: phy handle of physicl port, 0 if not any phy device. see ethernet.txt [1]. +- buf-size: rx buffer size, should be 16-1024. +- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096. + +[1] Documentation/devicetree/bindings/net/phy.txt + +Example: + +dsa: dsa@c7000000 { + compatible = "hisilicon,hns-dsaf-v1"; + dsa_name = "dsaf0"; + mode = "6port-16rss"; + interrupt-parent = <&mbigen_dsa>; + reg = <0x0 0xC0000000 0x0 0x420000 + 0x0 0xC2000000 0x0 0x300000 + 0x0 0xc5000000 0x0 0x890000 + 0x0 0xc7000000 0x0 0x60000>; + phy-handle = <0 0 0 0 &soc0_phy4 &soc0_phy5 0 0>; + interrupts = <131 4>,<132 4>, <133 4>,<134 4>, + <135 4>,<136 4>, <137 4>,<138 4>, + <139 4>,<140 4>, <141 4>,<142 4>, + <143 4>,<144 4>, <145 4>,<146 4>, + <147 4>,<148 4>, <384 1>,<385 1>, + <386 1>,<387 1>, <388 1>,<389 1>, + <390 1>,<391 1>, + buf-size = <4096>; + desc-num = <1024>; + dma-coherent; +}; diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt new file mode 100644 index 000000000000..9c23fdf25018 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt @@ -0,0 +1,22 @@ +Hisilicon MDIO bus controller + +Properties: +- compatible: "hisilicon,mdio","hisilicon,hns-mdio". +- reg: The base address of the MDIO bus controller register bank. +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. MDIO addresses have no size component. + +Typically an MDIO bus might have several children. + +Example: + mdio@803c0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "hisilicon,hns-mdio","hisilicon,mdio"; + reg = <0x0 0x803c0000 0x0 0x10000>; + + ethernet-phy@0 { + ... + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt new file mode 100644 index 000000000000..41d19be7011e --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt @@ -0,0 +1,47 @@ +Hisilicon Network Subsystem NIC controller + +Required properties: +- compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2". + "hisilicon,hns-nic-v1" is for hip05. + "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612. +- ae-name: accelerator name who provides this interface, + is simply a name referring to the name of name in the accelerator node. +- port-id: is the index of port provided by DSAF (the accelerator). DSAF can + connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They + are called debug ports. + + The remaining 6 PHYs are taken according to the mode of DSAF. + + In NIC mode of DSAF, all 6 PHYs are taken as ethernet ports to the CPU. The + port-id can be 2 to 7. Here is the diagram: + +-----+---------------+ + | CPU | + +-+-+-+---+-+-+-+-+-+-+ + | | | | | | | | + debug service + port port + (0,1) (2-7) + + In Switch mode of DSAF, all 6 PHYs are taken as physical ports connect to a + LAN Switch while the CPU side assume itself have one single NIC connect to + this switch. In this case, the port-id will be 2 only. + +-----+---------------+ + | CPU | + +-+-+-+---+-+-+-+-+-+-+ + | | service| port(2) + debug +------------+ + port | switch | + (0,1) +-+-+-+-+-+-++ + | | | | | | + external port + +- local-mac-address: mac addr of the ethernet interface + +Example: + + ethernet@0{ + compatible = "hisilicon,hns-nic-v1"; + ae-name = "dsaf0"; + port-id = <0>; + local-mac-address = [a2 14 e4 4b 56 76]; + }; diff --git a/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt b/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt new file mode 100644 index 000000000000..a4ed2efb5b73 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt @@ -0,0 +1,20 @@ +* MRF24J40 IEEE 802.15.4 * + +Required properties: + - compatible: should be "microchip,mrf24j40", "microchip,mrf24j40ma", + or "microchip,mrf24j40mc" depends on your transceiver + board + - spi-max-frequency: maximal bus speed, should be set something under or equal + 10000000 + - reg: the chipselect index + - interrupts: the interrupt generated by the device. + +Example: + + mrf24j40ma@0 { + compatible = "microchip,mrf24j40ma"; + spi-max-frequency = <8500000>; + reg = <0>; + interrupts = <19 8>; + interrupt-parent = <&gpio3>; + }; diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 7c4a0cc370cf..76df9173825a 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -1,7 +1,10 @@ * Marvell International Ltd. NCI NFC Controller Required properties: -- compatible: Should be "mrvl,nfc-uart". +- compatible: Should be: + - "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices + - "marvell,nfc-i2c" for I2C devices + - "marvell,nfc-spi" for SPI devices Optional SoC specific properties: - pinctrl-names: Contains only one value - "default". @@ -13,13 +16,19 @@ Optional UART-based chip specific properties: - flow-control: Specifies that the chip is using RTS/CTS. - break-control: Specifies that the chip needs specific break management. +Optional I2C-based chip specific properties: +- i2c-int-falling: Specifies that the chip read event shall be trigged on + falling edge. +- i2c-int-rising: Specifies that the chip read event shall be trigged on + rising edge. + Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): &uart5 { status = "okay"; nfcmrvluart: nfcmrvluart@5 { - compatible = "mrvl,nfc-uart"; + compatible = "marvell,nfc-uart"; reset-n-io = <&gpio3 16 0>; @@ -27,3 +36,51 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): flow-control; } }; + + +Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + nfcmrvli2c0: i2c@1 { + compatible = "marvell,nfc-i2c"; + + reg = <0x8>; + + /* I2C INT configuration */ + interrupt-parent = <&gpio3>; + interrupts = <21 0>; + + /* I2C INT trigger configuration */ + i2c-int-rising; + + /* Reset IO */ + reset-n-io = <&gpio3 19 0>; + }; +}; + + +Example (for ARM-based BeagleBoard Black on SPI0): + +&spi0 { + + mrvlnfcspi0: spi@0 { + compatible = "marvell,nfc-spi"; + + reg = <0>; + + /* SPI Bus configuration */ + spi-max-frequency = <3000000>; + spi-cpha; + spi-cpol; + + /* SPI INT configuration */ + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + /* Reset IO */ + reset-n-io = <&gpio3 19 0>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index d707588ed734..263732e8879f 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -11,6 +11,10 @@ Required properties: Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. +- ese-present: Specifies that an ese is physically connected to the nfc +controller. +- uicc-present: Specifies that the uicc swp signal can be physically +connected to the nfc controller. Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): @@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; }; }; diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt index 525681b6dc39..711ca85a363d 100644 --- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt +++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Should be "st,st21nfcb-spi" -- spi-max-frequency: Maximum SPI frequency (<= 10000000). +- spi-max-frequency: Maximum SPI frequency (<= 4000000). - interrupt-parent: phandle for the interrupt gpio controller - interrupts: GPIO interrupt to which the chip is connected - reset-gpios: Output GPIO pin used to reset the ST21NFCB @@ -10,6 +10,10 @@ Required properties: Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. +- ese-present: Specifies that an ese is physically connected to the nfc +controller. +- uicc-present: Specifies that the uicc swp signal can be physically +connected to the nfc controller. Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): @@ -27,5 +31,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): interrupts = <2 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 1fd8831437bf..b486f3f5f6a3 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -6,8 +6,12 @@ interface contains. Required properties: - compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC. "renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC. + "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC. - reg: offset and length of (1) the register block and (2) the stream buffer. -- interrupts: interrupt specifier for the sole interrupt. +- interrupts: A list of interrupt-specifiers, one for each entry in + interrupt-names. + If interrupt-names is not present, an interrupt specifier + for a single muxed interrupt. - phy-mode: see ethernet.txt file in the same directory. - phy-handle: see ethernet.txt file in the same directory. - #address-cells: number of address cells for the MDIO bus, must be equal to 1. @@ -18,6 +22,12 @@ Required properties: Optional properties: - interrupt-parent: the phandle for the interrupt controller that services interrupts for this device. +- interrupt-names: A list of interrupt names. + For the R8A7795 SoC this property is mandatory; + it should include one entry per channel, named "ch%u", + where %u is the channel number ranging from 0 to 24. + For other SoCs this property is optional; if present + it should contain "mux" for a single muxed interrupt. - pinctrl-names: pin configuration state name ("default"). - renesas,no-ether-link: boolean, specify when a board does not provide a proper AVB_LINK signal. @@ -27,13 +37,46 @@ Optional properties: Example: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7790"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + compatible = "renesas,etheravb-r8a7795"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; interrupt-parent = <&gic>; - interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; - phy-mode = "rmii"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; + pinctrl-0 = <ðer_pins>; pinctrl-names = "default"; renesas,no-ether-link; @@ -41,8 +84,20 @@ Example: #size-cells = <0>; phy0: ethernet-phy@0 { + rxc-skew-ps = <900>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <900>; + txen-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; reg = <0>; interrupt-parent = <&gpio2>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt index 2d66ed688125..bb5ab6de5924 100644 --- a/Documentation/filesystems/nfs/nfsroot.txt +++ b/Documentation/filesystems/nfs/nfsroot.txt @@ -157,6 +157,9 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>: both: use both BOOTP and RARP but not DHCP (old option kept for backwards compatibility) + if dhcp is used, the client identifier can be used by following + format "ip=dhcp,client-id-type,client-id-value" + Default: any <dns0-ip> IP address of first nameserver. diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index 1700756af057..aa69ccc481db 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -7,11 +7,11 @@ Introduction The IEEE 802.15.4 working group focuses on standardization of bottom two layers: Medium Access Control (MAC) and Physical (PHY). And there are mainly two options available for upper layers: - - ZigBee - proprietary protocol from ZigBee Alliance - - 6LowPAN - IPv6 networking over low rate personal area networks + - ZigBee - proprietary protocol from the ZigBee Alliance + - 6LoWPAN - IPv6 networking over low rate personal area networks -The Linux-ZigBee project goal is to provide complete implementation -of IEEE 802.15.4 and 6LoWPAN protocols. IEEE 802.15.4 is a stack +The linux-wpan project goal is to provide a complete implementation +of the IEEE 802.15.4 and 6LoWPAN protocols. IEEE 802.15.4 is a stack of protocols for organizing Low-Rate Wireless Personal Area Networks. The stack is composed of three main parts: diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ebe94f2cab98..05915be86235 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -384,6 +384,14 @@ tcp_mem - vector of 3 INTEGERs: min, pressure, max Defaults are calculated at boot time from amount of available memory. +tcp_min_rtt_wlen - INTEGER + The window length of the windowed min filter to track the minimum RTT. + A shorter window lets a flow more quickly pick up new (higher) + minimum RTT when it is moved to a longer path (e.g., due to traffic + engineering). A longer window makes the filter more resistant to RTT + inflations such as transient congestion. The unit is seconds. + Default: 300 + tcp_moderate_rcvbuf - BOOLEAN If set, TCP performs receive buffer auto-tuning, attempting to automatically size the buffer (no greater than tcp_rmem[2]) to @@ -425,6 +433,15 @@ tcp_orphan_retries - INTEGER you should think about lowering this value, such sockets may consume significant resources. Cf. tcp_max_orphans. +tcp_recovery - INTEGER + This value is a bitmap to enable various experimental loss recovery + features. + + RACK: 0x1 enables the RACK loss detection for fast detection of lost + retransmissions and tail drops. + + Default: 0x1 + tcp_reordering - INTEGER Initial reordering level of packets in a TCP stream. TCP stack can then dynamically adjust flow reordering level @@ -1199,7 +1216,8 @@ tag - INTEGER xfrm4_gc_thresh - INTEGER The threshold at which we will start garbage collecting for IPv4 destination cache entries. At twice this value the system will - refuse new allocations. + refuse new allocations. The value must be set below the flowcache + limit (4096 * number of online cpus) to take effect. igmp_link_local_mcast_reports - BOOLEAN Enable IGMP reports for link local multicast groups in the @@ -1645,7 +1663,8 @@ ratelimit - INTEGER xfrm6_gc_thresh - INTEGER The threshold at which we will start garbage collecting for IPv6 destination cache entries. At twice this value the system will - refuse new allocations. + refuse new allocations. The value must be set below the flowcache + limit (4096 * number of online cpus) to take effect. IPv6 Update by: diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index 3ba709531adb..e6b1c025fdd8 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -157,6 +157,16 @@ expire_quiescent_template - BOOLEAN persistence template if it is to be used to schedule a new connection and the destination server is quiescent. +ignore_tunneled - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + If set, ipvs will set the ipvs_property on all packets which are of + unrecognized protocols. This prevents us from routing tunneled + protocols like ipip, which is useful to prevent rescheduling + packets that have been tunneled to the ipvs host (i.e. to prevent + ipvs routing loops when ipvs is also acting as a real server). + nat_icmp_send - BOOLEAN 0 - disabled (default) not 0 - enabled diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt index c74434de2fa5..4650a00ed012 100644 --- a/Documentation/networking/l2tp.txt +++ b/Documentation/networking/l2tp.txt @@ -213,15 +213,12 @@ To create an L2TPv3 ethernet pseudowire between local host 192.168.1.1 and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the tunnel endpoints:- -# modprobe l2tp_eth -# modprobe l2tp_netlink - # ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \ udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2 # ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1 -# ifconfig -a +# ip -s -d show dev l2tpeth0 # ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0 -# ifconfig l2tpeth0 up +# ip li set dev l2tpeth0 up Choose IP addresses to be the address of a local IP interface and that of the remote system. The IP addresses of the l2tpeth0 interface can be diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt index 476df0496686..91994134efca 100644 --- a/Documentation/networking/switchdev.txt +++ b/Documentation/networking/switchdev.txt @@ -115,7 +115,7 @@ Switch ID ^^^^^^^^^ The switchdev driver must implement the switchdev op switchdev_port_attr_get -for SWITCHDEV_ATTR_PORT_PARENT_ID for each port netdev, returning the same +for SWITCHDEV_ATTR_ID_PORT_PARENT_ID for each port netdev, returning the same physical ID for each port of a switch. The ID must be unique between switches on the same system. The ID does not need to be unique between switches on different systems. @@ -178,7 +178,7 @@ entries are installed, for example, using iproute2 bridge cmd: bridge fdb add ADDR dev DEV [vlan VID] [self] The driver should use the helper switchdev_port_fdb_xxx ops for ndo_fdb_xxx -ops, and handle add/delete/dump of SWITCHDEV_OBJ_PORT_FDB object using +ops, and handle add/delete/dump of SWITCHDEV_OBJ_ID_PORT_FDB object using switchdev_port_obj_xxx ops. XXX: what should be done if offloading this rule to hardware fails (for @@ -233,26 +233,27 @@ the bridge's FDB. It's possible, but not optimal, to enable learning on the device port and on the bridge port, and disable learning_sync. To support learning and learning_sync port attributes, the driver implements -switchdev op switchdev_port_attr_get/set for SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS. -The driver should initialize the attributes to the hardware defaults. +switchdev op switchdev_port_attr_get/set for +SWITCHDEV_ATTR_PORT_ID_BRIDGE_FLAGS. The driver should initialize the attributes +to the hardware defaults. FDB Ageing ^^^^^^^^^^ -There are two FDB ageing models supported: 1) ageing by the device, and 2) -ageing by the kernel. Ageing by the device is preferred if many FDB entries -are supported. The driver calls call_switchdev_notifiers(SWITCHDEV_FDB_DEL, -...) to age out the FDB entry. In this model, ageing by the kernel should be -turned off. XXX: how to turn off ageing in kernel on a per-port basis or -otherwise prevent the kernel from ageing out the FDB entry? - -In the kernel ageing model, the standard bridge ageing mechanism is used to age -out stale FDB entries. To keep an FDB entry "alive", the driver should refresh -the FDB entry by calling call_switchdev_notifiers(SWITCHDEV_FDB_ADD, ...). The +The bridge will skip ageing FDB entries marked with NTF_EXT_LEARNED and it is +the responsibility of the port driver/device to age out these entries. If the +port device supports ageing, when the FDB entry expires, it will notify the +driver which in turn will notify the bridge with SWITCHDEV_FDB_DEL. If the +device does not support ageing, the driver can simulate ageing using a +garbage collection timer to monitor FBD entries. Expired entries will be +notified to the bridge using SWITCHDEV_FDB_DEL. See rocker driver for +example of driver running ageing timer. + +To keep an NTF_EXT_LEARNED entry "alive", the driver should refresh the FDB +entry by calling call_switchdev_notifiers(SWITCHDEV_FDB_ADD, ...). The notification will reset the FDB entry's last-used time to now. The driver should rate limit refresh notifications, for example, no more than once a -second. If the FDB entry expires, fdb_delete is called to remove entry from -the device. +second. (The last-used time is visible using the bridge -s fdb option). STP State Change on Port ^^^^^^^^^^^^^^^^^^^^^^^^ @@ -260,7 +261,7 @@ STP State Change on Port Internally or with a third-party STP protocol implementation (e.g. mstpd), the bridge driver maintains the STP state for ports, and will notify the switch driver of STP state change on a port using the switchdev op -switchdev_attr_port_set for SWITCHDEV_ATTR_PORT_STP_UPDATE. +switchdev_attr_port_set for SWITCHDEV_ATTR_PORT_ID_STP_UPDATE. State is one of BR_STATE_*. The switch driver can use STP state updates to update ingress packet filter list for the port. For example, if port is @@ -277,8 +278,8 @@ Flooding L2 domain For a given L2 VLAN domain, the switch device should flood multicast/broadcast and unknown unicast packets to all ports in domain, if allowed by port's current STP state. The switch driver, knowing which ports are within which -vlan L2 domain, can program the switch device for flooding. The packet should -also be sent to the port netdev for processing by the bridge driver. The +vlan L2 domain, can program the switch device for flooding. The packet may +be sent to the port netdev for processing by the bridge driver. The bridge should not reflood the packet to the same ports the device flooded, otherwise there will be duplicate packets on the wire. @@ -297,6 +298,9 @@ packets up to the bridge driver for flooding. This is not ideal as the number of ports scale in the L2 domain as the device is much more efficient at flooding packets that software. +If supported by the device, flood control can be offloaded to it, preventing +certain netdevs from flooding unicast traffic for which there is no FDB entry. + IGMP Snooping ^^^^^^^^^^^^^ @@ -316,9 +320,9 @@ SWITCHDEV_OBJ_IPV[4|6]_FIB object using switchdev_port_obj_xxx ops. switchdev_port_obj_add is used for both adding a new FIB entry to the device, or modifying an existing entry on the device. -XXX: Currently, only SWITCHDEV_OBJ_IPV4_FIB objects are supported. +XXX: Currently, only SWITCHDEV_OBJ_ID_IPV4_FIB objects are supported. -SWITCHDEV_OBJ_IPV4_FIB object passes: +SWITCHDEV_OBJ_ID_IPV4_FIB object passes: struct switchdev_obj_ipv4_fib { /* IPV4_FIB */ u32 dst; @@ -369,3 +373,22 @@ The driver can monitor for updates to arp_tbl using the netevent notifier NETEVENT_NEIGH_UPDATE. The device can be programmed with resolved nexthops for the routes as arp_tbl updates. The driver implements ndo_neigh_destroy to know when arp_tbl neighbor entries are purged from the port. + +Transaction item queue +^^^^^^^^^^^^^^^^^^^^^^ + +For switchdev ops attr_set and obj_add, there is a 2 phase transaction model +used. First phase is to "prepare" anything needed, including various checks, +memory allocation, etc. The goal is to handle the stuff that is not unlikely +to fail here. The second phase is to "commit" the actual changes. + +Switchdev provides an inftrastructure for sharing items (for example memory +allocations) between the two phases. + +The object created by a driver in "prepare" phase and it is queued up by: +switchdev_trans_item_enqueue() +During the "commit" phase, the driver gets the object by: +switchdev_trans_item_dequeue() + +If a transaction is aborted during "prepare" phase, switchdev code will handle +cleanup of the queued-up objects. diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 031ef4a63485..d52aa10cfe91 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -90,7 +90,304 @@ or to specify the output device using cmsg and IP_PKTINFO. Limitations ----------- -VRF device currently only works for IPv4. Support for IPv6 is under development. - Index of original ingress interface is not available via cmsg. Will address soon. + +################################################################################ + +Using iproute2 for VRFs +======================= +VRF devices do *not* have to start with 'vrf-'. That is a convention used here +for emphasis of the device type, similar to use of 'br' in bridge names. + +1. Create a VRF + + To instantiate a VRF device and associate it with a table: + $ ip link add dev NAME type vrf table ID + + Remember to add the ip rules as well: + $ ip ru add oif NAME table 10 + $ ip ru add iif NAME table 10 + $ ip -6 ru add oif NAME table 10 + $ ip -6 ru add iif NAME table 10 + + Without the rules route lookups are not directed to the table. + + For example: + $ ip link add dev vrf-blue type vrf table 10 + $ ip ru add pref 200 oif vrf-blue table 10 + $ ip ru add pref 200 iif vrf-blue table 10 + $ ip -6 ru add pref 200 oif vrf-blue table 10 + $ ip -6 ru add pref 200 iif vrf-blue table 10 + + +2. List VRFs + + To list VRFs that have been created: + $ ip [-d] link show type vrf + NOTE: The -d option is needed to show the table id + + For example: + $ ip -d link show type vrf + 11: vrf-mgmt: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 + link/ether 72:b3:ba:91:e2:24 brd ff:ff:ff:ff:ff:ff promiscuity 0 + vrf table 1 addrgenmode eui64 + 12: vrf-red: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 + link/ether b6:6f:6e:f6:da:73 brd ff:ff:ff:ff:ff:ff promiscuity 0 + vrf table 10 addrgenmode eui64 + 13: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 + link/ether 36:62:e8:7d:bb:8c brd ff:ff:ff:ff:ff:ff promiscuity 0 + vrf table 66 addrgenmode eui64 + 14: vrf-green: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 + link/ether e6:28:b8:63:70:bb brd ff:ff:ff:ff:ff:ff promiscuity 0 + vrf table 81 addrgenmode eui64 + + + Or in brief output: + + $ ip -br link show type vrf + vrf-mgmt UP 72:b3:ba:91:e2:24 <NOARP,MASTER,UP,LOWER_UP> + vrf-red UP b6:6f:6e:f6:da:73 <NOARP,MASTER,UP,LOWER_UP> + vrf-blue UP 36:62:e8:7d:bb:8c <NOARP,MASTER,UP,LOWER_UP> + vrf-green UP e6:28:b8:63:70:bb <NOARP,MASTER,UP,LOWER_UP> + + +3. Assign a Network Interface to a VRF + + Network interfaces are assigned to a VRF by enslaving the netdevice to a + VRF device: + $ ip link set dev NAME master VRF-NAME + + On enslavement connected and local routes are automatically moved to the + table associated with the VRF device. + + For example: + $ ip link set dev eth0 master vrf-mgmt + + +4. Show Devices Assigned to a VRF + + To show devices that have been assigned to a specific VRF add the master + option to the ip command: + $ ip link show master VRF-NAME + + For example: + $ ip link show master vrf-red + 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP mode DEFAULT group default qlen 1000 + link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff + 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP mode DEFAULT group default qlen 1000 + link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff + 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master vrf-red state DOWN mode DEFAULT group default qlen 1000 + link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff + + + Or using the brief output: + $ ip -br link show master vrf-red + eth1 UP 02:00:00:00:02:02 <BROADCAST,MULTICAST,UP,LOWER_UP> + eth2 UP 02:00:00:00:02:03 <BROADCAST,MULTICAST,UP,LOWER_UP> + eth5 DOWN 02:00:00:00:02:06 <BROADCAST,MULTICAST> + + +5. Show Neighbor Entries for a VRF + + To list neighbor entries associated with devices enslaved to a VRF device + add the master option to the ip command: + $ ip [-6] neigh show master VRF-NAME + + For example: + $ ip neigh show master vrf-red + 10.2.1.254 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE + 10.2.2.254 dev eth2 lladdr 5e:54:01:6a:ee:80 REACHABLE + + $ ip -6 neigh show master vrf-red + 2002:1::64 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE + + +6. Show Addresses for a VRF + + To show addresses for interfaces associated with a VRF add the master + option to the ip command: + $ ip addr show master VRF-NAME + + For example: + $ ip addr show master vrf-red + 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP group default qlen 1000 + link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff + inet 10.2.1.2/24 brd 10.2.1.255 scope global eth1 + valid_lft forever preferred_lft forever + inet6 2002:1::2/120 scope global + valid_lft forever preferred_lft forever + inet6 fe80::ff:fe00:202/64 scope link + valid_lft forever preferred_lft forever + 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP group default qlen 1000 + link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff + inet 10.2.2.2/24 brd 10.2.2.255 scope global eth2 + valid_lft forever preferred_lft forever + inet6 2002:2::2/120 scope global + valid_lft forever preferred_lft forever + inet6 fe80::ff:fe00:203/64 scope link + valid_lft forever preferred_lft forever + 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master vrf-red state DOWN group default qlen 1000 + link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff + + Or in brief format: + $ ip -br addr show master vrf-red + eth1 UP 10.2.1.2/24 2002:1::2/120 fe80::ff:fe00:202/64 + eth2 UP 10.2.2.2/24 2002:2::2/120 fe80::ff:fe00:203/64 + eth5 DOWN + + +7. Show Routes for a VRF + + To show routes for a VRF use the ip command to display the table associated + with the VRF device: + $ ip [-6] route show table ID + + For example: + $ ip route show table vrf-red + prohibit default + broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 + 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 + local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 + broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 + broadcast 10.2.2.0 dev eth2 proto kernel scope link src 10.2.2.2 + 10.2.2.0/24 dev eth2 proto kernel scope link src 10.2.2.2 + local 10.2.2.2 dev eth2 proto kernel scope host src 10.2.2.2 + broadcast 10.2.2.255 dev eth2 proto kernel scope link src 10.2.2.2 + + $ ip -6 route show table vrf-red + local 2002:1:: dev lo proto none metric 0 pref medium + local 2002:1::2 dev lo proto none metric 0 pref medium + 2002:1::/120 dev eth1 proto kernel metric 256 pref medium + local 2002:2:: dev lo proto none metric 0 pref medium + local 2002:2::2 dev lo proto none metric 0 pref medium + 2002:2::/120 dev eth2 proto kernel metric 256 pref medium + local fe80:: dev lo proto none metric 0 pref medium + local fe80:: dev lo proto none metric 0 pref medium + local fe80::ff:fe00:202 dev lo proto none metric 0 pref medium + local fe80::ff:fe00:203 dev lo proto none metric 0 pref medium + fe80::/64 dev eth1 proto kernel metric 256 pref medium + fe80::/64 dev eth2 proto kernel metric 256 pref medium + ff00::/8 dev vrf-red metric 256 pref medium + ff00::/8 dev eth1 metric 256 pref medium + ff00::/8 dev eth2 metric 256 pref medium + + +8. Route Lookup for a VRF + + A test route lookup can be done for a VRF by adding the oif option to ip: + $ ip [-6] route get oif VRF-NAME ADDRESS + + For example: + $ ip route get 10.2.1.40 oif vrf-red + 10.2.1.40 dev eth1 table vrf-red src 10.2.1.2 + cache + + $ ip -6 route get 2002:1::32 oif vrf-red + 2002:1::32 from :: dev eth1 table vrf-red proto kernel src 2002:1::2 metric 256 pref medium + + +9. Removing Network Interface from a VRF + + Network interfaces are removed from a VRF by breaking the enslavement to + the VRF device: + $ ip link set dev NAME nomaster + + Connected routes are moved back to the default table and local entries are + moved to the local table. + + For example: + $ ip link set dev eth0 nomaster + +-------------------------------------------------------------------------------- + +Commands used in this example: + +cat >> /etc/iproute2/rt_tables <<EOF +1 vrf-mgmt +10 vrf-red +66 vrf-blue +81 vrf-green +EOF + +function vrf_create +{ + VRF=$1 + TBID=$2 + # create VRF device + ip link add vrf-${VRF} type vrf table ${TBID} + + # add rules that direct lookups to vrf table + ip ru add pref 200 oif vrf-${VRF} table ${TBID} + ip ru add pref 200 iif vrf-${VRF} table ${TBID} + ip -6 ru add pref 200 oif vrf-${VRF} table ${TBID} + ip -6 ru add pref 200 iif vrf-${VRF} table ${TBID} + + if [ "${VRF}" != "mgmt" ]; then + ip route add table ${TBID} prohibit default + fi + ip link set dev vrf-${VRF} up + ip link set dev vrf-${VRF} state up +} + +vrf_create mgmt 1 +ip link set dev eth0 master vrf-mgmt + +vrf_create red 10 +ip link set dev eth1 master vrf-red +ip link set dev eth2 master vrf-red +ip link set dev eth5 master vrf-red + +vrf_create blue 66 +ip link set dev eth3 master vrf-blue + +vrf_create green 81 +ip link set dev eth4 master vrf-green + + +Interface addresses from /etc/network/interfaces: +auto eth0 +iface eth0 inet static + address 10.0.0.2 + netmask 255.255.255.0 + gateway 10.0.0.254 + +iface eth0 inet6 static + address 2000:1::2 + netmask 120 + +auto eth1 +iface eth1 inet static + address 10.2.1.2 + netmask 255.255.255.0 + +iface eth1 inet6 static + address 2002:1::2 + netmask 120 + +auto eth2 +iface eth2 inet static + address 10.2.2.2 + netmask 255.255.255.0 + +iface eth2 inet6 static + address 2002:2::2 + netmask 120 + +auto eth3 +iface eth3 inet static + address 10.2.3.2 + netmask 255.255.255.0 + +iface eth3 inet6 static + address 2002:3::2 + netmask 120 + +auto eth4 +iface eth4 inet static + address 10.2.4.2 + netmask 255.255.255.0 + +iface eth4 inet6 static + address 2002:4::2 + netmask 120 |