Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.5-rc1

  There's a few minor cleanups and fixes in here, but the majority of
  the patches in here fall into two buckets:

   - debugfs api cleanups and fixes

   - driver core device link support for boot dependancy issues

  The debugfs api cleanups are working to slowly refactor the debugfs
  apis so that it is even harder to use incorrectly. That work has been
  happening for the past few kernel releases and will continue over
  time, it's a long-term project/goal

  The driver core device link support missed 5.4 by just a bit, so it's
  been sitting and baking for many months now. It's from Saravana Kannan
  to help resolve the problems that DT-based systems have at boot time
  with dependancy graphs and kernel modules. Turns out that no one has
  actually tried to build a generic arm64 kernel with loads of modules
  and have it "just work" for a variety of platforms (like a distro
  kernel). The big problem turned out to be a lack of dependency
  information between different areas of DT entries, and the work here
  resolves that problem and now allows devices to boot properly, and
  quicker than a monolith kernel.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
  tracing: Remove unnecessary DEBUG_FS dependency
  of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
  debugfs: Fix !DEBUG_FS debugfs_create_automount
  of: property: Add device link support for "iommu-map"
  of: property: Fix the semantics of of_is_ancestor_of()
  i2c: of: Populate fwnode in of_i2c_get_board_info()
  drivers: base: Fix Kconfig indentation
  firmware_loader: Fix labels with comma for builtin firmware
  driver core: Allow device link operations inside sync_state()
  driver core: platform: Declare ret variable only once
  cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
  crypto: hisilicon: no need to check return value of debugfs_create functions
  driver core: platform: use the correct callback type for bus_find_device
  firmware_class: make firmware caching configurable
  driver core: Clarify documentation for fwnode_operations.add_links()
  mailbox: tegra: Fix superfluous IRQ error message
  net: caif: Fix debugfs on 64-bit platforms
  mac80211: Use debugfs_create_xul() helper
  media: c8sectpfe: no need to check return value of debugfs_create functions
  of: property: Add device link support for iommus, mboxes and io-channels
  ...

6 files changed, 85 insertions, 22 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index d05d531b4ec9..6d421694d98e 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -127,6 +127,7 @@ parameter is applicable::
 	NET	Appropriate network support is enabled.
 	NUMA	NUMA support is enabled.
 	NFS	Appropriate NFS support is enabled.
+	OF	Devicetree is enabled.
 	OSS	OSS sound support is enabled.
 	PV_OPS	A paravirtualized kernel is enabled.
 	PARIDE	The ParIDE (parallel port IDE) subsystem is enabled.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1fda057434c3..b25b47a47acd 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3240,6 +3240,12 @@
 			This can be set from sysctl after boot.
 			See Documentation/admin-guide/sysctl/vm.rst for details.
 
+	of_devlink	[OF, KNL] Create device links between consumer and
+			supplier devices by scanning the devictree to infer the
+			consumer/supplier relationships.  A consumer device
+			will not be probed until all the supplier devices have
+			probed successfully.
+
 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
 			See Documentation/debugging-via-ohci1394.txt for more
 			info.
diff --git a/Documentation/driver-api/device_link.rst b/Documentation/driver-api/device_link.rst
index 1b5020ec6517..bc2d89af88ce 100644
--- a/Documentation/driver-api/device_link.rst
+++ b/Documentation/driver-api/device_link.rst
@@ -281,7 +281,8 @@ State machine
   :c:func:`driver_bound()`.)
 
 * Before a consumer device is probed, presence of supplier drivers is
-  verified by checking that links to suppliers are in ``DL_STATE_AVAILABLE``
+  verified by checking the consumer device is not in the wait_for_suppliers
+  list and by checking that links to suppliers are in ``DL_STATE_AVAILABLE``
   state.  The state of the links is updated to ``DL_STATE_CONSUMER_PROBE``.
   (Call to :c:func:`device_links_check_suppliers()` from
   :c:func:`really_probe()`.)
diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index a100bef54952..4ab193319d8c 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -316,6 +316,10 @@ IOMAP
   devm_ioremap_nocache()
   devm_ioremap_wc()
   devm_ioremap_resource() : checks resource, requests memory region, ioremaps
+  devm_ioremap_resource_wc()
+  devm_platform_ioremap_resource() : calls devm_ioremap_resource() for platform device
+  devm_platform_ioremap_resource_wc()
+  devm_platform_ioremap_resource_byname()
   devm_iounmap()
   pcim_iomap()
   pcim_iomap_regions()	: do request_region() and iomap() on multiple BARs
diff --git a/Documentation/driver-api/driver-model/driver.rst b/Documentation/driver-api/driver-model/driver.rst
index 11d281506a04..baa6a85c8287 100644
--- a/Documentation/driver-api/driver-model/driver.rst
+++ b/Documentation/driver-api/driver-model/driver.rst
@@ -169,6 +169,49 @@ A driver's probe() may return a negative errno value to indicate that
 the driver did not bind to this device, in which case it should have
 released all resources it allocated::
 
+	void (*sync_state)(struct device *dev);
+
+sync_state is called only once for a device. It's called when all the consumer
+devices of the device have successfully probed. The list of consumers of the
+device is obtained by looking at the device links connecting that device to its
+consumer devices.
+
+The first attempt to call sync_state() is made during late_initcall_sync() to
+give firmware and drivers time to link devices to each other. During the first
+attempt at calling sync_state(), if all the consumers of the device at that
+point in time have already probed successfully, sync_state() is called right
+away. If there are no consumers of the device during the first attempt, that
+too is considered as "all consumers of the device have probed" and sync_state()
+is called right away.
+
+If during the first attempt at calling sync_state() for a device, there are
+still consumers that haven't probed successfully, the sync_state() call is
+postponed and reattempted in the future only when one or more consumers of the
+device probe successfully. If during the reattempt, the driver core finds that
+there are one or more consumers of the device that haven't probed yet, then
+sync_state() call is postponed again.
+
+A typical use case for sync_state() is to have the kernel cleanly take over
+management of devices from the bootloader. For example, if a device is left on
+and at a particular hardware configuration by the bootloader, the device's
+driver might need to keep the device in the boot configuration until all the
+consumers of the device have probed. Once all the consumers of the device have
+probed, the device's driver can synchronize the hardware state of the device to
+match the aggregated software state requested by all the consumers. Hence the
+name sync_state().
+
+While obvious examples of resources that can benefit from sync_state() include
+resources such as regulator, sync_state() can also be useful for complex
+resources like IOMMUs. For example, IOMMUs with multiple consumers (devices
+whose addresses are remapped by the IOMMU) might need to keep their mappings
+fixed at (or additive to) the boot configuration until all its consumers have
+probed.
+
+While the typical use case for sync_state() is to have the kernel cleanly take
+over management of devices from the bootloader, the usage of sync_state() is
+not restricted to that. Use it whenever it makes sense to take an action after
+all the consumers of a device have probed.
+
 	int 	(*remove)	(struct device *dev);
 
 remove is called to unbind a driver from a device. This may be
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
index 9e27c843d00e..dc497b96fa4f 100644
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.txt
@@ -68,41 +68,49 @@ actually necessary; the debugfs code provides a number of helper functions
 for simple situations.  Files containing a single integer value can be
 created with any of:
 
-    struct dentry *debugfs_create_u8(const char *name, umode_t mode,
-				     struct dentry *parent, u8 *value);
-    struct dentry *debugfs_create_u16(const char *name, umode_t mode,
-				      struct dentry *parent, u16 *value);
+    void debugfs_create_u8(const char *name, umode_t mode,
+			   struct dentry *parent, u8 *value);
+    void debugfs_create_u16(const char *name, umode_t mode,
+			    struct dentry *parent, u16 *value);
     struct dentry *debugfs_create_u32(const char *name, umode_t mode,
 				      struct dentry *parent, u32 *value);
-    struct dentry *debugfs_create_u64(const char *name, umode_t mode,
-				      struct dentry *parent, u64 *value);
+    void debugfs_create_u64(const char *name, umode_t mode,
+			    struct dentry *parent, u64 *value);
 
 These files support both reading and writing the given value; if a specific
 file should not be written to, simply set the mode bits accordingly.  The
 values in these files are in decimal; if hexadecimal is more appropriate,
 the following functions can be used instead:
 
-    struct dentry *debugfs_create_x8(const char *name, umode_t mode,
-				     struct dentry *parent, u8 *value);
-    struct dentry *debugfs_create_x16(const char *name, umode_t mode,
-				      struct dentry *parent, u16 *value);
-    struct dentry *debugfs_create_x32(const char *name, umode_t mode,
-				      struct dentry *parent, u32 *value);
-    struct dentry *debugfs_create_x64(const char *name, umode_t mode,
-				      struct dentry *parent, u64 *value);
+    void debugfs_create_x8(const char *name, umode_t mode,
+			   struct dentry *parent, u8 *value);
+    void debugfs_create_x16(const char *name, umode_t mode,
+			    struct dentry *parent, u16 *value);
+    void debugfs_create_x32(const char *name, umode_t mode,
+			    struct dentry *parent, u32 *value);
+    void debugfs_create_x64(const char *name, umode_t mode,
+			    struct dentry *parent, u64 *value);
 
 These functions are useful as long as the developer knows the size of the
 value to be exported.  Some types can have different widths on different
-architectures, though, complicating the situation somewhat.  There is a
-function meant to help out in one special case:
+architectures, though, complicating the situation somewhat.  There are
+functions meant to help out in such special cases:
 
-    struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
-				         struct dentry *parent, 
-					 size_t *value);
+    void debugfs_create_size_t(const char *name, umode_t mode,
+			       struct dentry *parent, size_t *value);
 
 As might be expected, this function will create a debugfs file to represent
 a variable of type size_t.
 
+Similarly, there are helpers for variables of type unsigned long, in decimal
+and hexadecimal:
+
+    struct dentry *debugfs_create_ulong(const char *name, umode_t mode,
+					struct dentry *parent,
+					unsigned long *value);
+    void debugfs_create_xul(const char *name, umode_t mode,
+			    struct dentry *parent, unsigned long *value);
+
 Boolean values can be placed in debugfs with:
 
     struct dentry *debugfs_create_bool(const char *name, umode_t mode,
@@ -114,8 +122,8 @@ lower-case values, or 1 or 0.  Any other input will be silently ignored.
 
 Also, atomic_t values can be placed in debugfs with:
 
-    struct dentry *debugfs_create_atomic_t(const char *name, umode_t mode,
-				struct dentry *parent, atomic_t *value)
+    void debugfs_create_atomic_t(const char *name, umode_t mode,
+				 struct dentry *parent, atomic_t *value)
 
 A read of this file will get atomic_t values, and a write of this file
 will set atomic_t values.