Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts (or adjacent changes of note).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

15 files changed, 207 insertions, 22 deletions

diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
index 5f502bf68fbc..ff456871bf4b 100644
--- a/Documentation/admin-guide/cgroup-v1/memory.rst
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -92,6 +92,13 @@ Brief summary of control files.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
+ memory.kmem.limit_in_bytes          Deprecated knob to set and read the kernel
+                                     memory hard limit. Kernel hard limit is not
+                                     supported since 5.16. Writing any value to
+                                     do file will not have any effect same as if
+                                     nokmem kernel parameter was specified.
+                                     Kernel memory is still charged and reported
+                                     by memory.kmem.usage_in_bytes.
  memory.kmem.usage_in_bytes          show current kernel memory allocation
  memory.kmem.failcnt                 show the number of kernel memory usage
 				     hits limits
diff --git a/Documentation/arch/arm64/cpu-feature-registers.rst b/Documentation/arch/arm64/cpu-feature-registers.rst
index 4e4625f2455f..de6d8a4790e2 100644
--- a/Documentation/arch/arm64/cpu-feature-registers.rst
+++ b/Documentation/arch/arm64/cpu-feature-registers.rst
@@ -175,6 +175,8 @@ infrastructure:
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+
+     | SME                          | [27-24] |    y    |
+     +------------------------------+---------+---------+
      | MTE                          | [11-8]  |    y    |
      +------------------------------+---------+---------+
      | SSBS                         | [7-4]   |    y    |
@@ -288,8 +290,18 @@ infrastructure:
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
      +------------------------------+---------+---------+
+     | CSSC                         | [55-52] |    y    |
+     +------------------------------+---------+---------+
+     | RPRFM                        | [51-48] |    y    |
+     +------------------------------+---------+---------+
+     | BC                           | [23-20] |    y    |
+     +------------------------------+---------+---------+
      | MOPS                         | [19-16] |    y    |
      +------------------------------+---------+---------+
+     | APA3                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | GPA3                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
      | RPRES                        | [7-4]   |    y    |
      +------------------------------+---------+---------+
      | WFXT                         | [3-0]   |    y    |
diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst
index 8c8addb4194c..76ff9d7398fd 100644
--- a/Documentation/arch/arm64/elf_hwcaps.rst
+++ b/Documentation/arch/arm64/elf_hwcaps.rst
@@ -305,6 +305,9 @@ HWCAP2_SMEF16F16
 HWCAP2_MOPS
     Functionality implied by ID_AA64ISAR2_EL1.MOPS == 0b0001.
 
+HWCAP2_HBC
+    Functionality implied by ID_AA64ISAR2_EL1.BC == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git a/Documentation/arch/loongarch/introduction.rst b/Documentation/arch/loongarch/introduction.rst
index 49135d451ced..8c568cfc2107 100644
--- a/Documentation/arch/loongarch/introduction.rst
+++ b/Documentation/arch/loongarch/introduction.rst
@@ -381,9 +381,9 @@ Documentation of LoongArch ISA:
 
 Documentation of LoongArch ELF psABI:
 
-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-CN.pdf (in Chinese)
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-CN.pdf (in Chinese)
 
-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-EN.pdf (in English)
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-EN.pdf (in English)
 
 Linux kernel repository of Loongson and LoongArch:
 
diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml
index 337ddf1113c4..4e867dd4d402 100644
--- a/Documentation/devicetree/bindings/ata/pata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -38,6 +38,7 @@ patternProperties:
       ID number 0 and the slave drive will have ID number 1. The PATA port
       nodes will be named "ide-port".
     type: object
+    additionalProperties: false
 
     properties:
       reg:
diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
index 839648e753d4..42b6f80613f3 100644
--- a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
@@ -37,6 +37,9 @@ properties:
     maxItems: 1
 
   '#clock-cells':
+    description:
+      The index in the assigned-clocks is mapped to the output clock as below
+      0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2.
     const: 1
 
   clocks:
@@ -68,7 +71,7 @@ examples:
             reg = <0x68>;
             #clock-cells = <1>;
 
-            clocks = <&x1_x2>;
+            clocks = <&x1>;
 
             renesas,settings = [
                 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
@@ -79,8 +82,8 @@ examples:
             assigned-clocks = <&versa3 0>, <&versa3 1>,
                               <&versa3 2>, <&versa3 3>,
                               <&versa3 4>, <&versa3 5>;
-            assigned-clock-rates = <12288000>, <25000000>,
-                                   <12000000>, <11289600>,
-                                   <11289600>, <24000000>;
+            assigned-clock-rates = <24000000>, <11289600>,
+                                   <11289600>, <12000000>,
+                                   <25000000>, <12288000>;
         };
     };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
index 21ae7bce038e..171a41407241 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -9,6 +9,9 @@ title: Freescale MXS Inter IC (I2C) Controller
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
 properties:
   compatible:
     enum:
@@ -37,7 +40,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index cf29ab10501c..b1b2cf81b42f 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -270,6 +270,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
     then:
       anyOf:
         - properties:
@@ -311,7 +312,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sdm630-smmu-v2
               - qcom,sm6375-smmu-v2
     then:
       anyOf:
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
index 9804d13de648..6a6f222b868f 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
@@ -31,10 +31,6 @@ properties:
   charger:
     $ref: /schemas/power/supply/maxim,max77693.yaml
 
-  connector:
-    $ref: /schemas/connector/usb-connector.yaml#
-    unevaluatedProperties: false
-
   led:
     $ref: /schemas/leds/maxim,max77693.yaml
 
diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
index da2dcfeebf12..510f6cb0f084 100644
--- a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
+++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
@@ -11,11 +11,16 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - loongson,ls2k0500-pmc
-          - loongson,ls2k1000-pmc
-      - const: syscon
+    oneOf:
+      - items:
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - loongson,ls2k1000-pmc
+              - loongson,ls2k2000-pmc
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -32,6 +37,18 @@ properties:
       addition, the PM need according to it to indicate that current
       SoC whether support Suspend To RAM.
 
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
 required:
   - compatible
   - reg
@@ -44,9 +61,23 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     power-management@1fe27000 {
-        compatible = "loongson,ls2k1000-pmc", "syscon";
+        compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
         reg = <0x1fe27000 0x58>;
         interrupt-parent = <&liointc1>;
         interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         loongson,suspend-address = <0x0 0x1c000500>;
+
+        syscon-reboot {
+            compatible = "syscon-reboot";
+            offset = <0x30>;
+            mask = <0x1>;
+        };
+
+        syscon-poweroff {
+            compatible = "syscon-poweroff";
+            regmap = <&pmc>;
+            offset = <0x14>;
+            mask = <0x3c00>;
+            value = <0x3c00>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
index 2f593c7225e5..14cac0e6e0a1 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -23,6 +23,13 @@ properties:
       - const: fsl,imx51-ecspi
       - const: fsl,imx53-ecspi
       - items:
+          - enum:
+              - fsl,imx25-cspi
+              - fsl,imx50-cspi
+              - fsl,imx51-cspi
+              - fsl,imx53-cspi
+          - const: fsl,imx35-cspi
+      - items:
           - const: fsl,imx8mp-ecspi
           - const: fsl,imx6ul-ecspi
       - items:
diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst
index deac4e973ddc..4d05b9862451 100644
--- a/Documentation/filesystems/porting.rst
+++ b/Documentation/filesystems/porting.rst
@@ -949,3 +949,99 @@ mmap_lock held.  All in-tree users have been audited and do not seem to
 depend on the mmap_lock being held, but out of tree users should verify
 for themselves.  If they do need it, they can return VM_FAULT_RETRY to
 be called with the mmap_lock held.
+
+---
+
+**mandatory**
+
+The order of opening block devices and matching or creating superblocks has
+changed.
+
+The old logic opened block devices first and then tried to find a
+suitable superblock to reuse based on the block device pointer.
+
+The new logic tries to find a suitable superblock first based on the device
+number, and opening the block device afterwards.
+
+Since opening block devices cannot happen under s_umount because of lock
+ordering requirements s_umount is now dropped while opening block devices and
+reacquired before calling fill_super().
+
+In the old logic concurrent mounters would find the superblock on the list of
+superblocks for the filesystem type. Since the first opener of the block device
+would hold s_umount they would wait until the superblock became either born or
+was discarded due to initialization failure.
+
+Since the new logic drops s_umount concurrent mounters could grab s_umount and
+would spin. Instead they are now made to wait using an explicit wait-wake
+mechanism without having to hold s_umount.
+
+---
+
+**mandatory**
+
+The holder of a block device is now the superblock.
+
+The holder of a block device used to be the file_system_type which wasn't
+particularly useful. It wasn't possible to go from block device to owning
+superblock without matching on the device pointer stored in the superblock.
+This mechanism would only work for a single device so the block layer couldn't
+find the owning superblock of any additional devices.
+
+In the old mechanism reusing or creating a superblock for a racing mount(2) and
+umount(2) relied on the file_system_type as the holder. This was severly
+underdocumented however:
+
+(1) Any concurrent mounter that managed to grab an active reference on an
+    existing superblock was made to wait until the superblock either became
+    ready or until the superblock was removed from the list of superblocks of
+    the filesystem type. If the superblock is ready the caller would simple
+    reuse it.
+
+(2) If the mounter came after deactivate_locked_super() but before
+    the superblock had been removed from the list of superblocks of the
+    filesystem type the mounter would wait until the superblock was shutdown,
+    reuse the block device and allocate a new superblock.
+
+(3) If the mounter came after deactivate_locked_super() and after
+    the superblock had been removed from the list of superblocks of the
+    filesystem type the mounter would reuse the block device and allocate a new
+    superblock (the bd_holder point may still be set to the filesystem type).
+
+Because the holder of the block device was the file_system_type any concurrent
+mounter could open the block devices of any superblock of the same
+file_system_type without risking seeing EBUSY because the block device was
+still in use by another superblock.
+
+Making the superblock the owner of the block device changes this as the holder
+is now a unique superblock and thus block devices associated with it cannot be
+reused by concurrent mounters. So a concurrent mounter in (2) could suddenly
+see EBUSY when trying to open a block device whose holder was a different
+superblock.
+
+The new logic thus waits until the superblock and the devices are shutdown in
+->kill_sb(). Removal of the superblock from the list of superblocks of the
+filesystem type is now moved to a later point when the devices are closed:
+
+(1) Any concurrent mounter managing to grab an active reference on an existing
+    superblock is made to wait until the superblock is either ready or until
+    the superblock and all devices are shutdown in ->kill_sb(). If the
+    superblock is ready the caller will simply reuse it.
+
+(2) If the mounter comes after deactivate_locked_super() but before
+    the superblock has been removed from the list of superblocks of the
+    filesystem type the mounter is made to wait until the superblock and the
+    devices are shut down in ->kill_sb() and the superblock is removed from the
+    list of superblocks of the filesystem type. The mounter will allocate a new
+    superblock and grab ownership of the block device (the bd_holder pointer of
+    the block device will be set to the newly allocated superblock).
+
+(3) This case is now collapsed into (2) as the superblock is left on the list
+    of superblocks of the filesystem type until all devices are shutdown in
+    ->kill_sb(). In other words, if the superblock isn't on the list of
+    superblock of the filesystem type anymore then it has given up ownership of
+    all associated block devices (the bd_holder pointer is NULL).
+
+As this is a VFS level change it has no practical consequences for filesystems
+other than that all of them must use one of the provided kill_litter_super(),
+kill_anon_super(), or kill_block_super() helpers.
diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst
index 858ed5d80def..0135905c0aa3 100644
--- a/Documentation/kbuild/kconfig-language.rst
+++ b/Documentation/kbuild/kconfig-language.rst
@@ -573,6 +573,32 @@ above, leading to:
 	bool "Support for foo hardware"
 	depends on ARCH_FOO_VENDOR || COMPILE_TEST
 
+Optional dependencies
+~~~~~~~~~~~~~~~~~~~~~
+
+Some drivers are able to optionally use a feature from another module
+or build cleanly with that module disabled, but cause a link failure
+when trying to use that loadable module from a built-in driver.
+
+The most common way to express this optional dependency in Kconfig logic
+uses the slightly counterintuitive::
+
+  config FOO
+	tristate "Support for foo hardware"
+	depends on BAR || !BAR
+
+This means that there is either a dependency on BAR that disallows
+the combination of FOO=y with BAR=m, or BAR is completely disabled.
+For a more formalized approach if there are multiple drivers that have
+the same dependency, a helper symbol can be used, like::
+
+  config FOO
+	tristate "Support for foo hardware"
+	depends on BAR_OPTIONAL
+
+  config BAR_OPTIONAL
+	def_tristate BAR || !BAR
+
 Kconfig recursive dependency limitations
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst
index 057db78d4095..03b7f3deb069 100644
--- a/Documentation/tools/rtla/rtla-timerlat-hist.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst
@@ -36,11 +36,11 @@ EXAMPLE
 In the example below, **rtla timerlat hist** is set to run for *10* minutes,
 in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat
 hist** will change the priority of the *timerlat* threads to run under
-*SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The
+*SCHED_DEADLINE* priority, with a *100us* runtime every *1ms* period. The
 *1ms* period is also passed to the *timerlat* tracer. Auto-analysis is disabled
 to reduce overhead ::
 
-  [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1ms --no-aa
+  [root@alien ~]# timerlat hist -d 10m -c 0-4 -P d:100us:1ms -p 1000 --no-aa
   # RTLA timerlat histogram
   # Time unit is microseconds (us)
   # Duration:   0 00:10:00
diff --git a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst
index cba04befc950..59d6bf33050c 100644
--- a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst
+++ b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst
@@ -344,9 +344,9 @@ LoongArch指令集架构的文档：
 
 LoongArch的ELF psABI文档：
 
-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-CN.pdf （中文版）
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-CN.pdf （中文版）
 
-  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.00-EN.pdf （英文版）
+  https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v2.01-EN.pdf （英文版）
 
 Loongson与LoongArch的Linux内核源码仓库：