Merge tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Infrastructure:
   - Add notification support

  New drivers:
   - Baikal-T1 PVT sensor driver
   - amd_energy driver to report energy counters
   - Driver for Maxim MAX16601
   - Gateworks System Controller

  Various:
   - applesmc: avoid overlong udelay()
   - dell-smm: Use one DMI match for all XPS models
   - ina2xx: Implement alert functions
   - lm70: Add support for ACPI
   - lm75: Fix coding-style warnings
   - lm90: Add max6654 support to lm90 driver
   - nct7802: Replace container_of() API
   - nct7904: Set default timeout
   - nct7904: Add watchdog function
   - pmbus: Improve initialization of 'currpage' and 'currphase'"

* tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits)
  hwmon: Add Baikal-T1 PVT sensor driver
  hwmon: Add notification support
  dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
  hwmon: (applesmc) avoid overlong udelay()
  hwmon: (nct7904) Set default timeout
  hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init()
  MAINTAINERS: add entry for AMD energy driver
  hwmon: (amd_energy) Add documentation
  hwmon: Add amd_energy driver to report energy counters
  hwmon: (nct7802) Replace container_of() API
  hwmon: (lm90) Add max6654 support to lm90 driver
  hwmon : (nct6775) Use kobj_to_dev() API
  hwmon: (pmbus) Driver for Maxim MAX16601
  hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'
  hwmon: (adt7411) update contact email
  hwmon: (lm75) Fix all coding-style warnings on lm75 driver
  hwmon: Reduce indentation level in __hwmon_device_register()
  hwmon: (ina2xx) Implement alert functions
  hwmon: (lm70) Add support for ACPI
  hwmon: (dell-smm) Use one DMI match for all XPS models
  ...

9 files changed, 785 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
new file mode 100644
index 000000000000..84ae4cdd08ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PVT Sensor
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Baikal-T1 SoC provides an embedded process, voltage and temperature
+  sensor to monitor an internal SoC environment (chip temperature, supply
+  voltage and process monitor) and on time detect critical situations,
+  which may cause the system instability and even damages. The IP-block
+  is based on the Analog Bits PVT sensor, but is equipped with a dedicated
+  control wrapper, which provides a MMIO registers-based access to the
+  sensor core functionality (APB3-bus based) and exposes an additional
+  functions like thresholds/data ready interrupts, its status and masks,
+  measurements timeout. Its internal structure is depicted on the next
+  diagram:
+
+     Analog Bits core                     Bakal-T1 PVT control block
+  +--------------------+                  +------------------------+
+  | Temperature sensor |-+         +------| Sensors control        |
+  |--------------------| |<---En---|      |------------------------|
+  | Voltage sensor     |-|<--Mode--| +--->| Sampled data           |
+  |--------------------| |<--Trim--+ |    |------------------------|
+  | Low-Vt sensor      |-|           | +--| Thresholds comparator  |
+  |--------------------| |---Data----| |  |------------------------|
+  | High-Vt sensor     |-|           | +->| Interrupts status      |
+  |--------------------| |--Valid--+-+ |  |------------------------|
+  | Standard-Vt sensor |-+         +---+--| Interrupts mask        |
+  +--------------------+                  |------------------------|
+           ^                              | Interrupts timeout     |
+           |                              +------------------------+
+           |                                        ^  ^
+  Rclk-----+----------------------------------------+  |
+  APB3-------------------------------------------------+
+
+  This bindings describes the external Baikal-T1 PVT control interfaces
+  like MMIO registers space, interrupt request number and clocks source.
+  These are then used by the corresponding hwmon device driver to
+  implement the sysfs files-based access to the sensors functionality.
+
+properties:
+  compatible:
+    const: baikal,bt1-pvt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PVT reference clock
+      - description: APB3 interface clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  "#thermal-sensor-cells":
+    description: Baikal-T1 can be referenced as the CPU thermal-sensor
+    const: 0
+
+  baikal,pvt-temp-offset-millicelsius:
+    description: |
+      Temperature sensor trimming factor. It can be used to manually adjust the
+      temperature measurements within 7.130 degrees Celsius.
+    maxItems: 1
+    items:
+      default: 0
+      minimum: 0
+      maximum: 7130
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pvt@1f200000 {
+      compatible = "baikal,bt1-pvt";
+      reg = <0x1f200000 0x1000>;
+      #thermal-sensor-cells = <0>;
+
+      interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
+
+      baikal,pvt-temp-trim-millicelsius = <1000>;
+
+      clocks = <&ccu_sys>, <&ccu_sys>;
+      clock-names = "ref", "pclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
new file mode 100644
index 000000000000..487a8445722e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller
+
+description: |
+  The Gateworks System Controller (GSC) is a device present across various
+  Gateworks product families that provides a set of system related features
+  such as the following (refer to the board hardware user manuals to see what
+  features are present)
+   - Watchdog Timer
+   - GPIO
+   - Pushbutton controller
+   - Hardware monitor with ADC's for temperature and voltage rails and
+     fan controller
+
+maintainers:
+  - Tim Harvey <tharvey@gateworks.com>
+  - Robert Jones <rjones@gateworks.com>
+
+properties:
+  $nodename:
+    pattern: "gsc@[0-9a-f]{1,2}"
+  compatible:
+    const: gw,gsc
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  adc:
+    type: object
+    description: Optional hardware monitoring module
+
+    properties:
+      compatible:
+        const: gw,gsc-adc
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^channel@[0-9]+$":
+        type: object
+        description: |
+          Properties for a single ADC which can report cooked values
+          (i.e. temperature sensor based on thermister), raw values
+          (i.e. voltage rail with a pre-scaling resistor divider).
+
+        properties:
+          reg:
+            description: Register of the ADC
+            maxItems: 1
+
+          label:
+            description: Name of the ADC input
+
+          gw,mode:
+            description: |
+              conversion mode:
+                0 - temperature, in C*10
+                1 - pre-scaled voltage value
+                2 - scaled voltage based on an optional resistor divider
+                    and optional offset
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2]
+
+          gw,voltage-divider-ohms:
+            description: Values of resistors for divider on raw ADC input
+            maxItems: 2
+            items:
+             minimum: 1000
+             maximum: 1000000
+
+          gw,voltage-offset-microvolt:
+            description: |
+              A positive voltage offset to apply to a raw ADC
+              (i.e. to compensate for a diode drop).
+            minimum: 0
+            maximum: 1000000
+
+        required:
+          - gw,mode
+          - reg
+          - label
+
+    required:
+      - compatible
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^fan-controller@[0-9a-f]+$":
+    type: object
+    description: Optional fan controller
+
+    properties:
+      compatible:
+        const: gw,gsc-fan
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The fan controller base address
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gsc@20 {
+            compatible = "gw,gsc";
+            reg = <0x20>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 GPIO_ACTIVE_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc {
+                compatible = "gw,gsc-adc";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                channel@0 { /* A0: Board Temperature */
+                    reg = <0x00>;
+                    label = "temp";
+                    gw,mode = <0>;
+                };
+
+                channel@2 { /* A1: Input Voltage (raw ADC) */
+                    reg = <0x02>;
+                    label = "vdd_vin";
+                    gw,mode = <1>;
+                    gw,voltage-divider-ohms = <22100 1000>;
+                    gw,voltage-offset-microvolt = <800000>;
+                };
+
+                channel@b { /* A2: Battery voltage */
+                    reg = <0x0b>;
+                    label = "vdd_bat";
+                    gw,mode = <1>;
+                };
+            };
+
+            fan-controller@2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "gw,gsc-fan";
+                reg = <0x2c>;
+            };
+        };
+    };
diff --git a/Documentation/hwmon/amd_energy.rst b/Documentation/hwmon/amd_energy.rst
new file mode 100644
index 000000000000..f8288edff664
--- /dev/null
+++ b/Documentation/hwmon/amd_energy.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver amd_energy
+==========================
+
+Supported chips:
+
+* AMD Family 17h Processors
+
+  Prefix: 'amd_energy'
+
+  Addresses used:  RAPL MSRs
+
+  Datasheets:
+
+  - Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors
+
+	https://developer.amd.com/wp-content/resources/55570-B1_PUB.zip
+
+  - Preliminary Processor Programming Reference (PPR) for AMD Family 17h Model 31h, Revision B0 Processors
+
+	https://developer.amd.com/wp-content/resources/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip
+
+Author: Naveen Krishna Chatradhi <nchatrad@amd.com>
+
+Description
+-----------
+
+The Energy driver exposes the energy counters that are
+reported via the Running Average Power Limit (RAPL)
+Model-specific Registers (MSRs) via the hardware monitor
+(HWMON) sysfs interface.
+
+1. Power, Energy and Time Units
+   MSR_RAPL_POWER_UNIT/ C001_0299:
+   shared with all cores in the socket
+
+2. Energy consumed by each Core
+   MSR_CORE_ENERGY_STATUS/ C001_029A:
+   32-bitRO, Accumulator, core-level power reporting
+
+3. Energy consumed by Socket
+   MSR_PACKAGE_ENERGY_STATUS/ C001_029B:
+   32-bitRO, Accumulator, socket-level power reporting,
+   shared with all cores in socket
+
+These registers are updated every 1ms and cleared on
+reset of the system.
+
+Note: If SMT is enabled, Linux enumerates all threads as cpus.
+Since, the energy status registers are accessed at core level,
+reading those registers from the sibling threads would result
+in duplicate values. Hence, energy counter entries are not
+populated for the siblings.
+
+Energy Caluclation
+------------------
+
+Energy information (in Joules) is based on the multiplier,
+1/2^ESU; where ESU is an unsigned integer read from
+MSR_RAPL_POWER_UNIT register. Default value is 10000b,
+indicating energy status unit is 15.3 micro-Joules increment.
+
+Reported values are scaled as per the formula
+
+scaled value = ((1/2^ESU) * (Raw value) * 1000000UL) in uJoules
+
+Users calculate power for a given domain by calculating
+	dEnergy/dTime for that domain.
+
+Energy accumulation
+--------------------------
+
+Current, Socket energy status register is 32bit, assuming a 240W
+2P system, the register would wrap around in
+
+	2^32*15.3 e-6/240 * 2 = 547.60833024 secs to wrap(~9 mins)
+
+The Core energy register may wrap around after several days.
+
+To improve the wrap around time, a kernel thread is implemented
+to accumulate the socket energy counters and one core energy counter
+per run to a respective 64-bit counter. The kernel thread starts
+running during probe, wakes up every 100secs and stops running
+when driver is removed.
+
+A socket and core energy read would return the current register
+value added to the respective energy accumulator.
+
+Sysfs attributes
+----------------
+
+=============== ========  =====================================
+Attribute	Label	  Description
+===============	========  =====================================
+
+* For index N between [1] and [nr_cpus]
+
+===============	========  ======================================
+energy[N]_input EcoreX	  Core Energy   X = [0] to [nr_cpus - 1]
+			  Measured input core energy
+===============	========  ======================================
+
+* For N between [nr_cpus] and [nr_cpus + nr_socks]
+
+===============	========  ======================================
+energy[N]_input EsocketX  Socket Energy X = [0] to [nr_socks -1]
+			  Measured input socket energy
+=============== ========  ======================================
diff --git a/Documentation/hwmon/bt1-pvt.rst b/Documentation/hwmon/bt1-pvt.rst
new file mode 100644
index 000000000000..cbb0c0613132
--- /dev/null
+++ b/Documentation/hwmon/bt1-pvt.rst
@@ -0,0 +1,117 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver bt1-pvt
+=====================
+
+Supported chips:
+
+  * Baikal-T1 PVT sensor (in SoC)
+
+    Prefix: 'bt1-pvt'
+
+    Addresses scanned: -
+
+    Datasheet: Provided by BAIKAL ELECTRONICS upon request and under NDA
+
+Authors:
+    Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
+    Serge Semin <Sergey.Semin@baikalelectronics.ru>
+
+Description
+-----------
+
+This driver implements support for the hardware monitoring capabilities of the
+embedded into Baikal-T1 process, voltage and temperature sensors. PVT IP-core
+consists of one temperature and four voltage sensors, which can be used to
+monitor the chip internal environment like heating, supply voltage and
+transistors performance. The driver can optionally provide the hwmon alarms
+for each sensor the PVT controller supports. The alarms functionality is made
+compile-time configurable due to the hardware interface implementation
+peculiarity, which is connected with an ability to convert data from only one
+sensor at a time. Additional limitation is that the controller performs the
+thresholds checking synchronously with the data conversion procedure. Due to
+these in order to have the hwmon alarms automatically detected the driver code
+must switch from one sensor to another, read converted data and manually check
+the threshold status bits. Depending on the measurements timeout settings
+(update_interval sysfs node value) this design may cause additional burden on
+the system performance. So in case if alarms are unnecessary in your system
+design it's recommended to have them disabled to prevent the PVT IRQs being
+periodically raised to get the data cache/alarms status up to date. By default
+in alarm-less configuration the data conversion is performed by the driver
+on demand when read operation is requested via corresponding _input-file.
+
+Temperature Monitoring
+----------------------
+
+Temperature is measured with 10-bit resolution and reported in millidegree
+Celsius. The driver performs all the scaling by itself therefore reports true
+temperatures that don't need any user-space adjustments. While the data
+translation formulae isn't linear, which gives us non-linear discreteness,
+it's close to one, but giving a bit better accuracy for higher temperatures.
+The temperature input is mapped as follows (the last column indicates the input
+ranges)::
+
+	temp1: CPU embedded diode	-48.38C - +147.438C
+
+In case if the alarms kernel config is enabled in the driver the temperature input
+has associated min and max limits which trigger an alarm when crossed.
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are also sampled with 10-bit resolution and reported in
+millivolts. But in this case the data translation formulae is linear, which
+provides a constant measurements discreteness. The data scaling is also
+performed by the driver, so returning true millivolts. The voltage inputs are
+mapped as follows (the last column indicates the input ranges)::
+
+	in0: VDD		(processor core)		0.62V - 1.168V
+	in1: Low-Vt		(low voltage threshold)		0.62V - 1.168V
+	in2: High-Vt		(high voltage threshold)	0.62V - 1.168V
+	in3: Standard-Vt	(standard voltage threshold)	0.62V - 1.168V
+
+In case if the alarms config is enabled in the driver the voltage inputs
+have associated min and max limits which trigger an alarm when crossed.
+
+Sysfs Attributes
+----------------
+
+Following is a list of all sysfs attributes that the driver provides, their
+permissions and a short description:
+
+=============================== ======= =======================================
+Name				Perm	Description
+=============================== ======= =======================================
+update_interval			RW	Measurements update interval per
+					sensor.
+temp1_type			RO	Sensor type (always 1 as CPU embedded
+					diode).
+temp1_label			RO	CPU Core Temperature sensor.
+temp1_input			RO	Measured temperature in millidegree
+					Celsius.
+temp1_min			RW	Low limit for temp input.
+temp1_max			RW	High limit for temp input.
+temp1_min_alarm			RO	Temperature input alarm. Returns 1 if
+					temperature input went below min limit,
+					0 otherwise.
+temp1_max_alarm			RO	Temperature input alarm. Returns 1 if
+					temperature input went above max limit,
+					0 otherwise.
+temp1_offset			RW	Temperature offset in millidegree
+					Celsius which is added to the
+					temperature reading by the chip. It can
+					be used to manually adjust the
+					temperature measurements within 7.130
+					degrees Celsius.
+in[0-3]_label			RO	CPU Voltage sensor (either core or
+					low/high/standard thresholds).
+in[0-3]_input			RO	Measured voltage in millivolts.
+in[0-3]_min			RW	Low limit for voltage input.
+in[0-3]_max			RW	High limit for voltage input.
+in[0-3]_min_alarm		RO	Voltage input alarm. Returns 1 if
+					voltage input went below min limit,
+					0 otherwise.
+in[0-3]_max_alarm		RO	Voltage input alarm. Returns 1 if
+					voltage input went above max limit,
+					0 otherwise.
+=============================== ======= =======================================
diff --git a/Documentation/hwmon/gsc-hwmon.rst b/Documentation/hwmon/gsc-hwmon.rst
new file mode 100644
index 000000000000..ffac392a7129
--- /dev/null
+++ b/Documentation/hwmon/gsc-hwmon.rst
@@ -0,0 +1,53 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver gsc-hwmon
+=======================
+
+Supported chips: Gateworks GSC
+Datasheet: http://trac.gateworks.com/wiki/gsc
+Author: Tim Harvey <tharvey@gateworks.com>
+
+Description:
+------------
+
+This driver supports hardware monitoring for the temperature sensor,
+various ADC's connected to the GSC, and optional FAN controller available
+on some boards.
+
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are scaled either internally or by the driver depending
+on the GSC version and firmware. The values returned by the driver do not need
+further scaling. The voltage input labels provide the voltage rail name:
+
+inX_input                  Measured voltage (mV).
+inX_label                  Name of voltage rail.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are measured with 12-bit or 10-bit resolution and are scaled
+either internally or by the driver depending on the GSC version and firmware.
+The values returned by the driver reflect millidegree Celcius:
+
+tempX_input                Measured temperature.
+tempX_label                Name of temperature input.
+
+
+PWM Output Control
+------------------
+
+The GSC features 1 PWM output that operates in automatic mode where the
+PWM value will be scalled depending on 6 temperature boundaries.
+The tempeature boundaries are read-write and in millidegree Celcius and the
+read-only PWM values range from 0 (off) to 255 (full speed).
+Fan speed will be set to minimum (off) when the temperature sensor reads
+less than pwm1_auto_point1_temp and maximum when the temperature sensor
+equals or exceeds pwm1_auto_point6_temp.
+
+pwm1_auto_point[1-6]_pwm       PWM value.
+pwm1_auto_point[1-6]_temp      Temperature boundary.
+
diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst
index 94b9a260c518..ed81f5416331 100644
--- a/Documentation/hwmon/ina2xx.rst
+++ b/Documentation/hwmon/ina2xx.rst
@@ -99,6 +99,25 @@ Sysfs entries for ina226, ina230 and ina231 only
 ------------------------------------------------
 
 ======================= ====================================================
+in0_lcrit		Critical low shunt voltage
+in0_crit		Critical high shunt voltage
+in0_lcrit_alarm		Shunt voltage critical low alarm
+in0_crit_alarm		Shunt voltage critical high alarm
+in1_lcrit		Critical low bus voltage
+in1_crit		Critical high bus voltage
+in1_lcrit_alarm		Bus voltage critical low alarm
+in1_crit_alarm		Bus voltage critical high alarm
+power1_crit		Critical high power
+power1_crit_alarm	Power critical high alarm
 update_interval		data conversion time; affects number of samples used
 			to average results for shunt and bus voltages.
 ======================= ====================================================
+
+.. note::
+
+   - Configure `shunt_resistor` before configure `power1_crit`, because power
+     value is calculated based on `shunt_resistor` set.
+   - Because of the underlying register implementation, only one `*crit` setting
+     and its `alarm` can be active. Writing to one `*crit` setting clears other
+     `*crit` settings and alarms. Writing 0 to any `*crit` setting clears all
+     `*crit` settings and alarms.
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 8ef62fd39787..005bf9e124bb 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -39,10 +39,12 @@ Hardware Monitoring Kernel Drivers
    adt7470
    adt7475
    amc6821
+   amd_energy
    asb100
    asc7621
    aspeed-pwm-tacho
    bel-pfe
+   bt1-pvt
    coretemp
    da9052
    da9055
@@ -60,6 +62,7 @@ Hardware Monitoring Kernel Drivers
    ftsteutates
    g760a
    g762
+   gsc-hwmon
    gl518sm
    hih6130
    ibmaem
@@ -106,6 +109,7 @@ Hardware Monitoring Kernel Drivers
    max16064
    max16065
    max1619
+   max16601
    max1668
    max197
    max20730
diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst
index 953315987c06..78dfc01b47a2 100644
--- a/Documentation/hwmon/lm90.rst
+++ b/Documentation/hwmon/lm90.rst
@@ -123,6 +123,18 @@ Supported chips:
 
 	       http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
 
+  * Maxim MAX6654
+
+    Prefix: 'max6654'
+
+    Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+			   0x4c, 0x4d and 0x4e
+
+    Datasheet: Publicly available at the Maxim website
+
+	       https://www.maximintegrated.com/en/products/sensors/MAX6654.html
+
   * Maxim MAX6657
 
     Prefix: 'max6657'
@@ -301,6 +313,13 @@ ADT7461, ADT7461A, NCT1008:
   * Extended temperature range (breaks compatibility)
   * Lower resolution for remote temperature
 
+MAX6654:
+  * Better local resolution
+  * Selectable address
+  * Remote sensor type selection
+  * Extended temperature range
+  * Extended resolution only available when conversion rate <= 1 Hz
+
 MAX6657 and MAX6658:
   * Better local resolution
   * Remote sensor type selection
@@ -336,8 +355,8 @@ SA56004X:
 
 All temperature values are given in degrees Celsius. Resolution
 is 1.0 degree for the local temperature, 0.125 degree for the remote
-temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
-resolution of 0.125 degree for both temperatures.
+temperature, except for the MAX6654, MAX6657, MAX6658 and MAX6659 which have
+a resolution of 0.125 degree for both temperatures.
 
 Each sensor has its own high and low limits, plus a critical limit.
 Additionally, there is a relative hysteresis value common to both critical
diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst
new file mode 100644
index 000000000000..346e74674c51
--- /dev/null
+++ b/Documentation/hwmon/max16601.rst
@@ -0,0 +1,159 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max16601
+======================
+
+Supported chips:
+
+  * Maxim MAX16601
+
+    Prefix: 'max16601'
+
+    Addresses scanned: -
+
+    Datasheet: Not published
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports the MAX16601 VR13.HC Dual-Output Voltage Regulator
+Chipset.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= =======================================================
+in1_label		"vin1"
+in1_input		VCORE input voltage.
+in1_alarm		Input voltage alarm.
+
+in2_label		"vout1"
+in2_input		VCORE output voltage.
+in2_alarm		Output voltage alarm.
+
+curr1_label		"iin1"
+curr1_input		VCORE input current, derived from duty cycle and output
+			current.
+curr1_max		Maximum input current.
+curr1_max_alarm		Current high alarm.
+
+curr2_label		"iin1.0"
+curr2_input		VCORE phase 0 input current.
+
+curr3_label		"iin1.1"
+curr3_input		VCORE phase 1 input current.
+
+curr4_label		"iin1.2"
+curr4_input		VCORE phase 2 input current.
+
+curr5_label		"iin1.3"
+curr5_input		VCORE phase 3 input current.
+
+curr6_label		"iin1.4"
+curr6_input		VCORE phase 4 input current.
+
+curr7_label		"iin1.5"
+curr7_input		VCORE phase 5 input current.
+
+curr8_label		"iin1.6"
+curr8_input		VCORE phase 6 input current.
+
+curr9_label		"iin1.7"
+curr9_input		VCORE phase 7 input current.
+
+curr10_label		"iin2"
+curr10_input		VCORE input current, derived from sensor element.
+
+curr11_label		"iin3"
+curr11_input		VSA input current.
+
+curr12_label		"iout1"
+curr12_input		VCORE output current.
+curr12_crit		Critical output current.
+curr12_crit_alarm	Output current critical alarm.
+curr12_max		Maximum output current.
+curr12_max_alarm	Output current high alarm.
+
+curr13_label		"iout1.0"
+curr13_input		VCORE phase 0 output current.
+
+curr14_label		"iout1.1"
+curr14_input		VCORE phase 1 output current.
+
+curr15_label		"iout1.2"
+curr15_input		VCORE phase 2 output current.
+
+curr16_label		"iout1.3"
+curr16_input		VCORE phase 3 output current.
+
+curr17_label		"iout1.4"
+curr17_input		VCORE phase 4 output current.
+
+curr18_label		"iout1.5"
+curr18_input		VCORE phase 5 output current.
+
+curr19_label		"iout1.6"
+curr19_input		VCORE phase 6 output current.
+
+curr20_label		"iout1.7"
+curr20_input		VCORE phase 7 output current.
+
+curr21_label		"iout3"
+curr21_input		VSA output current.
+curr21_highest		Historical maximum VSA output current.
+curr21_reset_history	Write any value to reset curr21_highest.
+curr21_crit		Critical output current.
+curr21_crit_alarm	Output current critical alarm.
+curr21_max		Maximum output current.
+curr21_max_alarm	Output current high alarm.
+
+power1_label		"pin1"
+power1_input		Input power, derived from duty cycle and output current.
+power1_alarm		Input power alarm.
+
+power2_label		"pin2"
+power2_input		Input power, derived from input current sensor.
+
+power3_label		"pout"
+power3_input		Output power.
+
+temp1_input		VCORE temperature.
+temp1_crit		Critical high temperature.
+temp1_crit_alarm	Chip temperature critical high alarm.
+temp1_max		Maximum temperature.
+temp1_max_alarm		Chip temperature high alarm.
+
+temp2_input		TSENSE_0 temperature
+temp3_input		TSENSE_1 temperature
+temp4_input		TSENSE_2 temperature
+temp5_input		TSENSE_3 temperature
+
+temp6_input		VSA temperature.
+temp6_crit		Critical high temperature.
+temp6_crit_alarm	Chip temperature critical high alarm.
+temp6_max		Maximum temperature.
+temp6_max_alarm		Chip temperature high alarm.
+======================= =======================================================