Merge 4.1-rc7 into staging-testing

We want the staging tree fixes in here too to help with testing and
merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 30 insertions, 38 deletions

diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 99983e67c13c..da95513571ea 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -162,7 +162,7 @@ Description:	Discover CPUs in the same CPU frequency coordination domain
 What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
 Date:		August 2008
 KernelVersion:	2.6.27
-Contact:	discuss@x86-64.org
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Disable L3 cache indices
 
 		These files exist in every CPU's cache/index3 directory. Each
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index c40711e8e8f7..28b28309f535 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -17,7 +17,8 @@ Required properties:
 - #clock-cells: from common clock binding; shall be set to 1.
 - clocks: from common clock binding; list of parent clock
   handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only.
+  si5351c only. Corresponding clock input names are "xtal" and
+  "clkin" respectively.
 - #address-cells: shall be set to 1.
 - #size-cells: shall be set to 0.
 
@@ -71,6 +72,7 @@ i2c-master-node {
 
 		/* connect xtal input to 25MHz reference */
 		clocks = <&ref25>;
+		clock-names = "xtal";
 
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt
index abd67c13d344..4451ee973223 100644
--- a/Documentation/devicetree/bindings/net/cdns-emac.txt
+++ b/Documentation/devicetree/bindings/net/cdns-emac.txt
@@ -3,7 +3,8 @@
 Required properties:
 - compatible: Should be "cdns,[<chip>-]{emac}"
   Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  or the generic form: "cdns,emac".
+  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
+  Or the generic form: "cdns,emac".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt
 - phy-mode: see ethernet.txt file in the same directory.
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index dc2a18f0b3a1..ddbe304beb21 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -15,10 +15,8 @@ Optional properties:
   - phys: phandle + phy specifier pair
   - phy-names: must be "usb"
   - dmas: Must contain a list of references to DMA specifiers.
-  - dma-names : Must contain a list of DMA names:
-   - tx0 ... tx<n>
-   - rx0 ... rx<n>
-    - This <n> means DnFIFO in USBHS module.
+  - dma-names : named "ch%d", where %d is the channel number ranging from zero
+                to the number of channels (DnFIFOs) minus one.
 
 Example:
 	usbhs: usb@e6590000 {
diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
index 8eb88e974055..711f75e189eb 100644
--- a/Documentation/hwmon/tmp401
+++ b/Documentation/hwmon/tmp401
@@ -20,7 +20,7 @@ Supported chips:
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
   * Texas Instruments TMP435
     Prefix: 'tmp435'
-    Addresses scanned: I2C 0x37, 0x48 - 0x4f
+    Addresses scanned: I2C 0x48 - 0x4f
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
 
 Authors:
diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt
index 43e94ea6d2ca..263b907517ac 100644
--- a/Documentation/target/tcmu-design.txt
+++ b/Documentation/target/tcmu-design.txt
@@ -15,8 +15,7 @@ Contents:
   a) Discovering and configuring TCMU uio devices
   b) Waiting for events on the device(s)
   c) Managing the command ring
-3) Command filtering and pass_level
-4) A final note
+3) A final note
 
 
 TCM Userspace Design
@@ -324,7 +323,7 @@ int handle_device_events(int fd, void *map)
   /* Process events from cmd ring until we catch up with cmd_head */
   while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) {
 
-    if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) {
+    if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) {
       uint8_t *cdb = (void *)mb + ent->req.cdb_off;
       bool success = true;
 
@@ -339,8 +338,12 @@ int handle_device_events(int fd, void *map)
         ent->rsp.scsi_status = SCSI_CHECK_CONDITION;
       }
     }
+    else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) {
+      /* Tell the kernel we didn't handle unknown opcodes */
+      ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP;
+    }
     else {
-      /* Do nothing for PAD entries */
+      /* Do nothing for PAD entries except update cmd_tail */
     }
 
     /* update cmd_tail */
@@ -360,28 +363,6 @@ int handle_device_events(int fd, void *map)
 }
 
 
-Command filtering and pass_level
---------------------------------
-
-TCMU supports a "pass_level" option with valid values of 0 or 1.  When
-the value is 0 (the default), nearly all SCSI commands received for
-the device are passed through to the handler. This allows maximum
-flexibility but increases the amount of code required by the handler,
-to support all mandatory SCSI commands. If pass_level is set to 1,
-then only IO-related commands are presented, and the rest are handled
-by LIO's in-kernel command emulation. The commands presented at level
-1 include all versions of:
-
-READ
-WRITE
-WRITE_VERIFY
-XDWRITEREAD
-WRITE_SAME
-COMPARE_AND_WRITE
-SYNCHRONIZE_CACHE
-UNMAP
-
-
 A final note
 ------------
 
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
index 53838d9c6295..c59bd9bc41ef 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virtual/kvm/mmu.txt
@@ -169,6 +169,10 @@ Shadow pages contain the following information:
     Contains the value of cr4.smep && !cr0.wp for which the page is valid
     (pages for which this is true are different from other pages; see the
     treatment of cr0.wp=0 below).
+  role.smap_andnot_wp:
+    Contains the value of cr4.smap && !cr0.wp for which the page is valid
+    (pages for which this is true are different from other pages; see the
+    treatment of cr0.wp=0 below).
   gfn:
     Either the guest page table containing the translations shadowed by this
     page, or the base page frame for linear translations.  See role.direct.
@@ -344,10 +348,16 @@ on fault type:
 
 (user write faults generate a #PF)
 
-In the first case there is an additional complication if CR4.SMEP is
-enabled: since we've turned the page into a kernel page, the kernel may now
-execute it.  We handle this by also setting spte.nx.  If we get a user
-fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back.
+In the first case there are two additional complications:
+- if CR4.SMEP is enabled: since we've turned the page into a kernel page,
+  the kernel may now execute it.  We handle this by also setting spte.nx.
+  If we get a user fetch or read fault, we'll change spte.u=1 and
+  spte.nx=gpte.nx back.
+- if CR4.SMAP is disabled: since the page has been changed to a kernel
+  page, it can not be reused when CR4.SMAP is enabled. We set
+  CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,
+  here we do not care the case that CR4.SMAP is enabled since KVM will
+  directly inject #PF to guest due to failed permission check.
 
 To prevent an spte that was converted into a kernel page with cr0.wp=0
 from being written by the kernel after cr0.wp has changed to 1, we make