Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.5 cycle

Usual mixed bag, but the big item perhaps in this series is the DMA buffer
support added by Lars-Peter Clausen. It's been in the works for a long time
and it will be interesting to see what hardware support shows up now that
this is available.

New core features + associate cleanup.
* Add generic DMA buffer infrastructure
* Add a DMAengine framework based buffer
 Also associated minor changes.
   - Set the device buffer watermark based on the minimum watermark for all
     attached buffers rather than just the 'primary' one.
   - iio_buffer_init - only set the watermark default if one hasn't already
     been provided.  This allows simple support for devices with a fixed
     watermark.
   - read only attribute for watermark on fixed watermark devices.
   - add explicit buffer enable/disable callbacks to allow the buffer to
     do more than trivial actions when it is being turned on and off.
* IIO_VAL_INT support in write_raw_get_fmt function.

New device support
* Freescale MMA7455/7456L accelerometers
* Memsic MXC6255XC accelerometer
* ST lis2dh12 accelerometer
* TI ADS8688 ADC
* TI Palamas (twl6035/7) gpadc

New driver features
* mma8452
  - support either of the available interrupt pins to cope with the case
    where board layout has lead to a particular one being connected.

Staging graduation
* Dummy driver
  - this driver acts as both an example and a test device for those with
    out hardware to develop userspace code against.

Cleanups and minor bits and bobs.
* treewide
  - Sort out the ordering of iio_device_register/unregister vs runtime
    pm function calls so that it's all nice and consistent and not race
    prone.
  - Check sscanf return values.  None of the cases will actually happen as
    the strings are supplied internally, but best to be consistent on this.
* ad7780
  - switch over to the gpio descriptor interface and remove the now unused
    platform data which gets rid of a header entirely.
* ad7793
  - drop a pointless else statement.
* at91_adc
  - Swap kmalloc_array in for a kmalloc doing the same job.
* dummy
  - get rid of some commented out lines that snuck in during the move of
    the driver.
* lm3533-als
  - Print an error message on provision of an invalid resistance.
* mcp320x
  - Add compatible strings with vendor prefix and deprecate those with
    no vendor prefix.
* mxs-lradc
  - Use BIT macro in various places rather than shifted ones.
* pa12203001
  - Power off the chip if the registration fails.
* pulsedlight-lidar-lite
  - add runtime PM support.
* xilinx XADC
  - constify an iio_buffer_setup_ops structure.

5 files changed, 96 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index e3c37467d7da..3c10e8581144 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -7,13 +7,18 @@ Required properties:
     * "fsl,mma8453"
     * "fsl,mma8652"
     * "fsl,mma8653"
+
   - reg: the I2C address of the chip
 
 Optional properties:
 
   - interrupt-parent: should be the phandle for the interrupt controller
+
   - interrupts: interrupt mapping for GPIO IRQ
 
+  - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
+		     interrupt line in use.
+
 Example:
 
 	mma8453fc@1d {
@@ -21,4 +26,5 @@ Example:
 		reg = <0x1d>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <5 0>;
+		interrupt-names = "INT2";
 	};
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
index 2a1f3af30155..bcd3ac8e6e0c 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
@@ -10,16 +10,28 @@ must be specified.
 Required properties:
 	- compatible:  	Must be one of the following, depending on the
 			model:
-				"mcp3001"
-				"mcp3002"
-				"mcp3004"
-				"mcp3008"
-				"mcp3201"
-				"mcp3202"
-				"mcp3204"
-				"mcp3208"
-				"mcp3301"
+				"mcp3001" (DEPRECATED)
+				"mcp3002" (DEPRECATED)
+				"mcp3004" (DEPRECATED)
+				"mcp3008" (DEPRECATED)
+				"mcp3201" (DEPRECATED)
+				"mcp3202" (DEPRECATED)
+				"mcp3204" (DEPRECATED)
+				"mcp3208" (DEPRECATED)
+				"mcp3301" (DEPRECATED)
 
+				"microchip,mcp3001"
+				"microchip,mcp3002"
+				"microchip,mcp3004"
+				"microchip,mcp3008"
+				"microchip,mcp3201"
+				"microchip,mcp3202"
+				"microchip,mcp3204"
+				"microchip,mcp3208"
+				"microchip,mcp3301"
+
+			NOTE: The use of the compatibles with no vendor prefix
+			is deprecated and only listed because old DT use them.
 
 Examples:
 spi_controller {
diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
new file mode 100644
index 000000000000..4bb9a86065d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
@@ -0,0 +1,48 @@
+* Palmas general purpose ADC IP block devicetree bindings
+
+Channels list:
+	0 battery type
+	1 battery temp NTC (optional current source)
+	2 GP
+	3 temp (with ext. diode, optional current source)
+	4 GP
+	5 GP
+	6 VBAT_SENSE
+	7 VCC_SENSE
+	8 Backup Battery voltage
+	9 external charger (VCHG)
+	10 VBUS
+	11 DC-DC current probe (how does this work?)
+	12 internal die temp
+	13 internal die temp
+	14 USB ID pin voltage
+	15 test network
+
+Required properties:
+- compatible : Must be "ti,palmas-gpadc".
+- #io-channel-cells: Should be set to <1>.
+
+Optional sub-nodes:
+ti,channel0-current-microamp: Channel 0 current in uA.
+	Values are rounded to derive 0uA, 5uA, 15uA, 20uA.
+ti,channel3-current-microamp: Channel 3 current in uA.
+	Values are rounded to derive 0uA, 10uA, 400uA, 800uA.
+ti,enable-extended-delay: Enable extended delay.
+
+Example:
+
+pmic {
+	compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+	...
+	gpadc {
+		compatible = "ti,palmas-gpadc";
+		interrupts = <18 0
+			      16 0
+			      17 0>;
+		#io-channel-cells = <1>;
+		ti,channel0-current-microamp = <5>;
+		ti,channel3-current-microamp = <10>;
+		};
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt
new file mode 100644
index 000000000000..a02337d7efa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt
@@ -0,0 +1,20 @@
+* Texas Instruments' ADS8684 and ADS8688 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,ads8684" or "ti,ads8688"
+ - reg: spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+adc@0 {
+	compatible = "ti,ads8688";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index d3ccdb190c53..d4b87cc1e446 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -36,6 +36,7 @@ Accelerometers:
 - st,lsm303dlm-accel
 - st,lsm330-accel
 - st,lsm303agr-accel
+- st,lis2dh12-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro