Merge branch 'remotes/lorenzo/pci/keystone'

  - Move IRQ register address computation inside macros (Kishon Vijay
    Abraham I)

  - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I)

  - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham
    I)

  - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon
    Vijay Abraham I)

  - Add dwc support for platforms with custom MSI controllers (Kishon Vijay
    Abraham I)

  - Add keystone-specific MSI controller (Kishon Vijay Abraham I)

  - Remove dwc host_ops previously used for keystone-specific MSI (Kishon
    Vijay Abraham I)

  - Skip dwc default MSI init if platform has custom MSI controller (Kishon
    Vijay Abraham I)

  - Implement .start_link() and .stop_link() for keystone endpoint support
    (Kishon Vijay Abraham I)

  - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I)

  - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon
    Vijay Abraham I)

  - Get keystone register resources from DT by name, not index (Kishon
    Vijay Abraham I)

  - Get DT resources in .probe() to prepare for endpoint support (Kishon
    Vijay Abraham I)

  - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration
    (Kishon Vijay Abraham I)

  - Explicitly set keystone to host mode (Kishon Vijay Abraham I)

  - Document DT "atu" reg-names requirement for DesignWare core >= 4.80
    (Kishon Vijay Abraham I)

  - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon
    Vijay Abraham I)

  - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon
    Vijay Abraham I)

  - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham
    I)

  - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham
    I)

  - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I)

  - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I)

  - Make of_pci_get_max_link_speed() available to endpoint drivers as well
    as host drivers (Kishon Vijay Abraham I)

  - Add keystone support for DT "max-link-speed" property (Kishon Vijay
    Abraham I)

  - Add endpoint library support for BAR buffer alignment (Kishon Vijay
    Abraham I)

  - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I)

  - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay
    Abraham I)

  - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon
    Vijay Abraham I)

  - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay
    Abraham I)

  - Configure designware endpoints to advertise smallest resizable BAR
    (1MB) (Kishon Vijay Abraham I)

  - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay
    Abraham I)

  - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I)

  - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I)

* remotes/lorenzo/pci/keystone:
  misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
  misc: pci_endpoint_test: Add support to test PCI EP in AM654x
  PCI: designware-ep: Use aligned ATU window for raising MSI interrupts
  PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size
  PCI: keystone: Add support for PCIe EP in AM654x Platforms
  dt-bindings: PCI: Add PCI EP DT binding documentation for AM654
  PCI: dwc: Add callbacks for accessing dbi2 address space
  PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset
  PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops
  PCI: endpoint: Add support to specify alignment for buffers allocated to BARs
  PCI: keystone: Add support to set the max link speed from DT
  PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
  PCI: keystone: Invoke phy_reset() API before enabling PHY
  PCI: keystone: Add support for PCIe RC in AM654x Platforms
  dt-bindings: PCI: Add PCI RC DT binding documentation for AM654
  PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
  PCI: dwc: Fix ATU identification for designware version >= 4.80
  PCI: dwc: Enable iATU unroll for endpoint too
  dt-bindings: PCI: Document "atu" reg-names
  PCI: keystone: Explicitly set the PCIe mode
  dt-bindings: PCI: Add dt-binding to configure PCIe mode
  PCI: keystone: Move resources initialization to prepare for EP support
  PCI: keystone: Use platform_get_resource_byname() to get memory resources
  PCI: keystone: Perform host initialization in a single function
  dt-bindings: PCI: keystone: Add "reg-names" binding information
  PCI: keystone: Cleanup error_irq configuration
  PCI: keystone: Add start_link()/stop_link() dw_pcie_ops
  PCI: dwc: Remove default MSI initialization for platform specific MSI chips
  PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  PCI: keystone: Use Keystone specific msi_irq_chip
  PCI: dwc: Add support to use non default msi_irq_chip
  PCI: keystone: Cleanup ks_pcie_msi_irq_handler()
  PCI: keystone: Use hwirq to get the MSI IRQ number offset
  PCI: keystone: Add separate functions for configuring MSI and legacy interrupt
  PCI: keystone: Cleanup interrupt related macros

# Conflicts:
#	drivers/pci/controller/dwc/pcie-designware.h

2 files changed, 60 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index c124f9bc11f3..5561a1c060d0 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -4,8 +4,11 @@ Required properties:
 - compatible:
 	"snps,dw-pcie" for RC mode;
 	"snps,dw-pcie-ep" for EP mode;
-- reg: Should contain the configuration address space.
-- reg-names: Must be "config" for the PCIe configuration space.
+- reg: For designware cores version < 4.80 contains the configuration
+       address space. For designware core version >= 4.80, contains
+       the configuration and ATU address space
+- reg-names: Must be "config" for the PCIe configuration space and "atu" for
+	     the ATU address space.
     (The old way of getting the configuration address space from "ranges"
     is deprecated and should be avoided.)
 - num-lanes: number of lanes to use
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 2030ee0dc4f9..47202a2938f2 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -11,16 +11,24 @@ described here as well as properties that are not applicable.
 
 Required Properties:-
 
-compatibility: "ti,keystone-pcie"
-reg:	index 1 is the base address and length of DW application registers.
-	index 2 is the base address and length of PCI device ID register.
+compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
+	       Should be "ti,am654-pcie-rc" for RC on AM654x SoC
+reg: Three register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+	   TI specific application registers, "config" for the
+	   configuration space address
 
 pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
 	interrupt-cells: should be set to 1
 	interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
+	(required if the compatible is "ti,keystone-pcie")
+msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
+	 (required if the compatible is "ti,am654-pcie-rc".
 
 ti,syscon-pcie-id : phandle to the device control module required to set device
 		    id and vendor id.
+ti,syscon-pcie-mode : phandle to the device control module required to configure
+		      PCI in either RC mode or EP mode.
 
  Example:
 	pcie_msi_intc: msi-interrupt-controller {
@@ -61,3 +69,47 @@ Optional properties:-
 DesignWare DT Properties not applicable for Keystone PCI
 
 1. pcie_bus clock-names not used.  Instead, a phandle to phys is used.
+
+AM654 PCIe Endpoint
+===================
+
+Required Properties:-
+
+compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC
+reg: Four register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+	   TI specific application registers, "atu" for the
+	   Address Translation Unit configuration registers and
+	   "addr_space" used to map remote RC address space
+num-ib-windows: As specified in
+		Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-ob-windows: As specified in
+		Documentation/devicetree/bindings/pci/designware-pcie.txt
+num-lanes: As specified in
+	   Documentation/devicetree/bindings/pci/designware-pcie.txt
+power-domains: As documented by the generic PM domain bindings in
+	       Documentation/devicetree/bindings/power/power_domain.txt.
+ti,syscon-pcie-mode: phandle to the device control module required to configure
+		      PCI in either RC mode or EP mode.
+
+Optional properties:-
+
+phys: list of PHY specifiers (used by generic PHY framework)
+phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+               number of lanes as specified in *num-lanes* property.
+("phys" and "phy-names" DT bindings are specified in
+Documentation/devicetree/bindings/phy/phy-bindings.txt)
+interrupts: platform interrupt for error interrupts.
+
+pcie-ep {
+	compatible = "ti,am654-pcie-ep";
+	reg =  <0x5500000 0x1000>, <0x5501000 0x1000>,
+	       <0x10000000 0x8000000>, <0x5506000 0x1000>;
+	reg-names = "app", "dbics", "addr_space", "atu";
+	power-domains = <&k3_pds 120>;
+	ti,syscon-pcie-mode = <&pcie0_mode>;
+	num-lanes = <1>;
+	num-ib-windows = <16>;
+	num-ob-windows = <16>;
+	interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+};