summaryrefslogtreecommitdiff
path: root/Documentation/usb
diff options
context:
space:
mode:
authorLu Baolu <baolu.lu@linux.intel.com>2017-03-21 11:01:33 +0300
committerIngo Molnar <mingo@kernel.org>2017-03-21 14:30:17 +0300
commit1b326277798aa820c1043617786609b9bb4bee78 (patch)
tree9315e8a4fabb1d31437b069bb0fb89ea9b01e674 /Documentation/usb
parent57fb47279a04cd53641dc5ae55a6d47e4f32a2fd (diff)
downloadlinux-1b326277798aa820c1043617786609b9bb4bee78.tar.xz
usb/doc: Add document for USB3 debug port usage
Add Documentation/usb/usb3-debug-port.rst. This document includes the guide for using USB3 debug port. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-6-git-send-email-baolu.lu@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'Documentation/usb')
-rw-r--r--Documentation/usb/usb3-debug-port.rst100
1 files changed, 100 insertions, 0 deletions
diff --git a/Documentation/usb/usb3-debug-port.rst b/Documentation/usb/usb3-debug-port.rst
new file mode 100644
index 000000000000..feb1a36a65b7
--- /dev/null
+++ b/Documentation/usb/usb3-debug-port.rst
@@ -0,0 +1,100 @@
+===============
+USB3 debug port
+===============
+
+:Author: Lu Baolu <baolu.lu@linux.intel.com>
+:Date: March 2017
+
+GENERAL
+=======
+
+This is a HOWTO for using the USB3 debug port on x86 systems.
+
+Before using any kernel debugging functionality based on USB3
+debug port, you need to::
+
+ 1) check whether any USB3 debug port is available in
+ your system;
+ 2) check which port is used for debugging purposes;
+ 3) have a USB 3.0 super-speed A-to-A debugging cable.
+
+INTRODUCTION
+============
+
+The xHCI debug capability (DbC) is an optional but standalone
+functionality provided by the xHCI host controller. The xHCI
+specification describes DbC in the section 7.6.
+
+When DbC is initialized and enabled, it will present a debug
+device through the debug port (normally the first USB3
+super-speed port). The debug device is fully compliant with
+the USB framework and provides the equivalent of a very high
+performance full-duplex serial link between the debug target
+(the system under debugging) and a debug host.
+
+EARLY PRINTK
+============
+
+DbC has been designed to log early printk messages. One use for
+this feature is kernel debugging. For example, when your machine
+crashes very early before the regular console code is initialized.
+Other uses include simpler, lockless logging instead of a full-
+blown printk console driver and klogd.
+
+On the debug target system, you need to customize a debugging
+kernel with CONFIG_EARLY_PRINTK_USB_XDBC enabled. And, add below
+kernel boot parameter::
+
+ "earlyprintk=xdbc"
+
+If there are multiple xHCI controllers in your system, you can
+append a host contoller index to this kernel parameter. This
+index starts from 0.
+
+Current design doesn't support DbC runtime suspend/resume. As
+the result, you'd better disable runtime power management for
+USB subsystem by adding below kernel boot parameter::
+
+ "usbcore.autosuspend=-1"
+
+Before starting the debug target, you should connect the debug
+port to a USB port (root port or port of any external hub) on
+the debug host. The cable used to connect these two ports
+should be a USB 3.0 super-speed A-to-A debugging cable.
+
+During early boot of the debug target, DbC will be detected and
+initialized. After initialization, the debug host should be able
+to enumerate the debug device in debug target. The debug host
+will then bind the debug device with the usb_debug driver module
+and create the /dev/ttyUSB device.
+
+If the debug device enumeration goes smoothly, you should be able
+to see below kernel messages on the debug host::
+
+ # tail -f /var/log/kern.log
+ [ 1815.983374] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd
+ [ 1815.999595] usb 4-3: LPM exit latency is zeroed, disabling LPM.
+ [ 1815.999899] usb 4-3: New USB device found, idVendor=1d6b, idProduct=0004
+ [ 1815.999902] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+ [ 1815.999903] usb 4-3: Product: Remote GDB
+ [ 1815.999904] usb 4-3: Manufacturer: Linux
+ [ 1815.999905] usb 4-3: SerialNumber: 0001
+ [ 1816.000240] usb_debug 4-3:1.0: xhci_dbc converter detected
+ [ 1816.000360] usb 4-3: xhci_dbc converter now attached to ttyUSB0
+
+You can use any communication program, for example minicom, to
+read and view the messages. Below simple bash scripts can help
+you to check the sanity of the setup.
+
+.. code-block:: sh
+
+ ===== start of bash scripts =============
+ #!/bin/bash
+
+ while true ; do
+ while [ ! -d /sys/class/tty/ttyUSB0 ] ; do
+ :
+ done
+ cat /dev/ttyUSB0
+ done
+ ===== end of bash scripts ===============