Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp->data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot & felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...

2 files changed, 175 insertions, 0 deletions

diff --git a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
new file mode 100644
index 000000000000..b64bec1ce144
--- /dev/null
+++ b/Documentation/trace/fprobe.rst
@@ -0,0 +1,174 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Fprobe - Function entry/exit probe
+==================================
+
+.. Author: Masami Hiramatsu <mhiramat@kernel.org>
+
+Introduction
+============
+
+Fprobe is a function entry/exit probe mechanism based on ftrace.
+Instead of using ftrace full feature, if you only want to attach callbacks
+on function entry and exit, similar to the kprobes and kretprobes, you can
+use fprobe. Compared with kprobes and kretprobes, fprobe gives faster
+instrumentation for multiple functions with single handler. This document
+describes how to use fprobe.
+
+The usage of fprobe
+===================
+
+The fprobe is a wrapper of ftrace (+ kretprobe-like return callback) to
+attach callbacks to multiple function entry and exit. User needs to set up
+the `struct fprobe` and pass it to `register_fprobe()`.
+
+Typically, `fprobe` data structure is initialized with the `entry_handler`
+and/or `exit_handler` as below.
+
+.. code-block:: c
+
+ struct fprobe fp = {
+        .entry_handler  = my_entry_callback,
+        .exit_handler   = my_exit_callback,
+ };
+
+To enable the fprobe, call one of register_fprobe(), register_fprobe_ips(), and
+register_fprobe_syms(). These functions register the fprobe with different types
+of parameters.
+
+The register_fprobe() enables a fprobe by function-name filters.
+E.g. this enables @fp on "func*()" function except "func2()".::
+
+  register_fprobe(&fp, "func*", "func2");
+
+The register_fprobe_ips() enables a fprobe by ftrace-location addresses.
+E.g.
+
+.. code-block:: c
+
+  unsigned long ips[] = { 0x.... };
+
+  register_fprobe_ips(&fp, ips, ARRAY_SIZE(ips));
+
+And the register_fprobe_syms() enables a fprobe by symbol names.
+E.g.
+
+.. code-block:: c
+
+  char syms[] = {"func1", "func2", "func3"};
+
+  register_fprobe_syms(&fp, syms, ARRAY_SIZE(syms));
+
+To disable (remove from functions) this fprobe, call::
+
+  unregister_fprobe(&fp);
+
+You can temporally (soft) disable the fprobe by::
+
+  disable_fprobe(&fp);
+
+and resume by::
+
+  enable_fprobe(&fp);
+
+The above is defined by including the header::
+
+  #include <linux/fprobe.h>
+
+Same as ftrace, the registered callbacks will start being called some time
+after the register_fprobe() is called and before it returns. See
+:file:`Documentation/trace/ftrace.rst`.
+
+Also, the unregister_fprobe() will guarantee that the both enter and exit
+handlers are no longer being called by functions after unregister_fprobe()
+returns as same as unregister_ftrace_function().
+
+The fprobe entry/exit handler
+=============================
+
+The prototype of the entry/exit callback function is as follows:
+
+.. code-block:: c
+
+ void callback_func(struct fprobe *fp, unsigned long entry_ip, struct pt_regs *regs);
+
+Note that both entry and exit callbacks have same ptototype. The @entry_ip is
+saved at function entry and passed to exit handler.
+
+@fp
+        This is the address of `fprobe` data structure related to this handler.
+        You can embed the `fprobe` to your data structure and get it by
+        container_of() macro from @fp. The @fp must not be NULL.
+
+@entry_ip
+        This is the ftrace address of the traced function (both entry and exit).
+        Note that this may not be the actual entry address of the function but
+        the address where the ftrace is instrumented.
+
+@regs
+        This is the `pt_regs` data structure at the entry and exit. Note that
+        the instruction pointer of @regs may be different from the @entry_ip
+        in the entry_handler. If you need traced instruction pointer, you need
+        to use @entry_ip. On the other hand, in the exit_handler, the instruction
+        pointer of @regs is set to the currect return address.
+
+Share the callbacks with kprobes
+================================
+
+Since the recursion safeness of the fprobe (and ftrace) is a bit different
+from the kprobes, this may cause an issue if user wants to run the same
+code from the fprobe and the kprobes.
+
+Kprobes has per-cpu 'current_kprobe' variable which protects the kprobe
+handler from recursion in all cases. On the other hand, fprobe uses
+only ftrace_test_recursion_trylock(). This allows interrupt context to
+call another (or same) fprobe while the fprobe user handler is running.
+
+This is not a matter if the common callback code has its own recursion
+detection, or it can handle the recursion in the different contexts
+(normal/interrupt/NMI.)
+But if it relies on the 'current_kprobe' recursion lock, it has to check
+kprobe_running() and use kprobe_busy_*() APIs.
+
+Fprobe has FPROBE_FL_KPROBE_SHARED flag to do this. If your common callback
+code will be shared with kprobes, please set FPROBE_FL_KPROBE_SHARED
+*before* registering the fprobe, like:
+
+.. code-block:: c
+
+ fprobe.flags = FPROBE_FL_KPROBE_SHARED;
+
+ register_fprobe(&fprobe, "func*", NULL);
+
+This will protect your common callback from the nested call.
+
+The missed counter
+==================
+
+The `fprobe` data structure has `fprobe::nmissed` counter field as same as
+kprobes.
+This counter counts up when;
+
+ - fprobe fails to take ftrace_recursion lock. This usually means that a function
+   which is traced by other ftrace users is called from the entry_handler.
+
+ - fprobe fails to setup the function exit because of the shortage of rethook
+   (the shadow stack for hooking the function return.)
+
+The `fprobe::nmissed` field counts up in both cases. Therefore, the former
+skips both of entry and exit callback and the latter skips the exit
+callback, but in both case the counter will increase by 1.
+
+Note that if you set the FTRACE_OPS_FL_RECURSION and/or FTRACE_OPS_FL_RCU to
+`fprobe::ops::flags` (ftrace_ops::flags) when registering the fprobe, this
+counter may not work correctly, because ftrace skips the fprobe function which
+increase the counter.
+
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/fprobe.h
+.. kernel-doc:: kernel/trace/fprobe.c
+
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index 3a47aa8341c6..f9b7bcb5a630 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -9,6 +9,7 @@ Linux Tracing Technologies
    tracepoint-analysis
    ftrace
    ftrace-uses
+   fprobe
    kprobes
    kprobetrace
    uprobetracer