summaryrefslogtreecommitdiff
path: root/Documentation/sound
diff options
context:
space:
mode:
authorLibin Yang <libin.yang@linux.intel.com>2016-01-12 06:13:25 +0300
committerTakashi Iwai <tiwai@suse.de>2016-01-29 09:34:56 +0300
commit463c35fb7981acedef5e98fe8252bfaaa91dd74c (patch)
treeb6ce4ab7cbeb171b03a74f1c7893dc875d4b5007 /Documentation/sound
parentac98379a751e37ba9e5622f9519d9469498572c1 (diff)
downloadlinux-463c35fb7981acedef5e98fe8252bfaaa91dd74c.tar.xz
ALSA: Add documentation about HD-audio DP MST
Add the documentation about HD-audio DP MST: 1. Overview 2. Jack Others will be added later. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt74
1 files changed, 74 insertions, 0 deletions
diff --git a/Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt b/Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt
new file mode 100644
index 000000000000..82744ac3513d
--- /dev/null
+++ b/Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt
@@ -0,0 +1,74 @@
+To support DP MST audio, HD Audio hdmi codec driver introduces virtual pin
+and dynamic pcm assignment.
+
+Virtual pin is an extension of per_pin. The most difference of DP MST
+from legacy is that DP MST introduces device entry. Each pin can contain
+several device entries. Each device entry behaves as a pin.
+
+As each pin may contain several device entries and each codec may contain
+several pins, if we use one pcm per per_pin, there will be many PCMs.
+The new solution is to create a few PCMs and to dynamically bind pcm to
+per_pin. Driver uses spec->dyn_pcm_assign flag to indicate whether to use
+the new solution.
+
+PCM
+===
+To be added
+
+
+Jack
+====
+
+Presume:
+ - MST must be dyn_pcm_assign, and it is acomp (for Intel scenario);
+ - NON-MST may or may not be dyn_pcm_assign, it can be acomp or !acomp;
+
+So there are the following scenarios:
+ a. MST (&& dyn_pcm_assign && acomp)
+ b. NON-MST && dyn_pcm_assign && acomp
+ c. NON-MST && !dyn_pcm_assign && !acomp
+
+Below discussion will ignore MST and NON-MST difference as it doesn't
+impact on jack handling too much.
+
+Driver uses struct hdmi_pcm pcm[] array in hdmi_spec and snd_jack is
+a member of hdmi_pcm. Each pin has one struct hdmi_pcm * pcm pointer.
+
+For !dyn_pcm_assign, per_pin->pcm will assigned to spec->pcm[n] statically.
+
+For dyn_pcm_assign, per_pin->pcm will assigned to spec->pcm[n]
+when monitor is hotplugged.
+
+
+Build Jack
+----------
+
+- dyn_pcm_assign
+Will not use hda_jack but use snd_jack in spec->pcm_rec[pcm_idx].jack directly.
+
+- !dyn_pcm_assign
+Use hda_jack and assign spec->pcm_rec[pcm_idx].jack = jack->jack statically.
+
+
+Unsolicited Event Enabling
+--------------------------
+Enable unsolicited event if !acomp.
+
+
+Monitor Hotplug Event Handling
+------------------------------
+- acomp
+pin_eld_notify() -> check_presence_and_report() -> hdmi_present_sense() ->
+sync_eld_via_acomp().
+Use directly snd_jack_report() on spec->pcm_rec[pcm_idx].jack for
+both dyn_pcm_assign and !dyn_pcm_assign
+
+- !acomp
+Hdmi_unsol_event() -> hdmi_intrinsic_event() -> check_presence_and_report() ->
+hdmi_present_sense() -> hdmi_prepsent_sense_via_verbs()
+Use directly snd_jack_report() on spec->pcm_rec[pcm_idx].jack for dyn_pcm_assign.
+Use hda_jack mechanism to handle jack events.
+
+
+Others to be added later
+========================