scsi: docs: convert dc395x.txt to ReST

Link: https://lore.kernel.org/r/3c0876df0045695185f922a0404c497a69de36a9.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 0 insertions, 102 deletions

diff --git a/Documentation/scsi/dc395x.txt b/Documentation/scsi/dc395x.txt
deleted file mode 100644
index 88219f96633d..000000000000
--- a/Documentation/scsi/dc395x.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-README file for the dc395x SCSI driver
-==========================================
-
-Status
-------
-The driver has been tested with CD-R and CD-R/W drives. These should
-be safe to use. Testing with hard disks has not been done to any
-great degree and caution should be exercised if you want to attempt
-to use this driver with hard disks.
-
-This is a 2.5 only driver. For a 2.4 driver please see the original
-driver (which this driver started from) at
-http://www.garloff.de/kurt/linux/dc395/
-
-Problems, questions and patches should be submitted to the mailing
-list. Details on the list, including archives, are available at
-http://lists.twibble.org/mailman/listinfo/dc395x/
-
-Parameters
-----------
-The driver uses the settings from the EEPROM set in the SCSI BIOS 
-setup. If there is no EEPROM, the driver uses default values.
-Both can be overridden by command line parameters (module or kernel
-parameters).
-
-The following parameters are available:
-
- - safe
-   Default: 0, Acceptable values: 0 or 1
-
-   If safe is set to 1 then the adapter will use conservative
-   ("safe") default settings. This sets:
-
-		shortcut for dc395x=7,4,9,15,2,10
-
- - adapter_id
-   Default: 7, Acceptable values: 0 to 15
-
-   Sets the host adapter SCSI ID.
-
- - max_speed
-   Default: 1, Acceptable value: 0 to 7
-   0 = 20   Mhz
-   1 = 12.2 Mhz
-   2 = 10   Mhz
-   3 = 8    Mhz
-   4 = 6.7  Mhz
-   5 = 5.8  Hhz
-   6 = 5    Mhz
-   7 = 4    Mhz
-
- - dev_mode
-   Bitmap for device configuration
-
-   DevMode bit definition:
-      Bit Val(hex) Val(dec)  Meaning
-      *0    0x01       1     Parity check
-      *1    0x02       2     Synchronous Negotiation
-      *2    0x04       4     Disconnection
-      *3    0x08       8     Send Start command on startup. (Not used)
-      *4    0x10      16     Tagged Command Queueing
-      *5    0x20      32     Wide Negotiation
-
- - adapter_mode
-   Bitmap for adapter configuration
-
-   AdaptMode bit definition
-      Bit Val(hex) Val(dec)  Meaning
-      *0    0x01       1     Support more than two drives. (Not used)
-      *1    0x02       2     Use DOS compatible mapping for HDs greater than 1GB.
-      *2    0x04       4     Reset SCSI Bus on startup.
-      *3    0x08       8     Active Negation: Improves SCSI Bus noise immunity.
-       4    0x10      16     Immediate return on BIOS seek command. (Not used)
-    (*)5    0x20      32     Check for LUNs >= 1.
-
- - tags
-   Default: 3, Acceptable values: 0-5
-   
-   The number of tags is 1<<x, if x has been specified
-
- - reset_delay
-   Default: 1, Acceptable values: 0-180
-
-   The seconds to not accept commands after a SCSI Reset
-
-
-For the built  in driver the parameters should be prefixed with
-dc395x. (eg "dc395x.safe=1")
-
-
-Copyright
----------
-The driver is free software. It is protected by the GNU General Public
-License (GPL). Please read it, before using this driver. It should be
-included in your kernel sources and with your distribution. It carries the
-filename COPYING. If you don't have it, please ask me to send you one by
-email.
-Note: The GNU GPL says also something about warranty and liability. 
-Please be aware the following: While we do my best to provide a working and
-reliable driver, there is a chance, that it will kill your valuable data. 
-We refuse to take any responsibility for that. The driver is provided as-is
-and YOU USE IT AT YOUR OWN RESPONSIBILITY.