Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Fix dra7 for hardware issues limiting L4Per and L3init power domains
  to on state. Without this the devices may not work correctly after
  some time of use because of asymmetric aging. And related to this,
  let's also remove the unusable states.

- Always select omap interconnect for am43x as otherwise the am43x
  only configurations will not boot properly. This can happen easily
  for any product kernels that leave out other SoCs to save memory.

- Fix DSS PLL2 addresses that have gone unused for now

- Select erratum 430973 for omap3, this is now safe to do and can
  save quite a bit of debugging time for people who may have left
  it out.

* tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  + Linux 4.7-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 10 insertions, 7 deletions

diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 631b0f7ae16f..9d05ed7f7da5 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -369,8 +369,6 @@ does not allocate any driver private context space.
 Switch configuration
 --------------------
 
-- priv_size: additional size needed by the switch driver for its private context
-
 - tag_protocol: this is to indicate what kind of tagging protocol is supported,
   should be a valid value from the dsa_tag_protocol enum
 
@@ -416,11 +414,6 @@ PHY devices and link management
   to the switch port MDIO registers. If unavailable return a negative error
   code.
 
-- poll_link: Function invoked by DSA to query the link state of the switch
-  builtin Ethernet PHYs, per port. This function is responsible for calling
-  netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
-  single call. Executes from workqueue context.
-
 - adjust_link: Function invoked by the PHY library when a slave network device
   is attached to a PHY device. This function is responsible for appropriately
   configuring the switch port link parameters: speed, duplex, pause based on
@@ -542,6 +535,16 @@ Bridge layer
 Bridge VLAN filtering
 ---------------------
 
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+  configured for turning on or off VLAN filtering. If nothing specific needs to
+  be done at the hardware level, this callback does not need to be implemented.
+  When VLAN filtering is turned on, the hardware must be programmed with
+  rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+  VLAN ID map/rules.  If there is no PVID programmed into the switch port,
+  untagged frames must be rejected as well. When turned off the switch must
+  accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+  allowed.
+
 - port_vlan_prepare: bridge layer function invoked when the bridge prepares the
   configuration of a VLAN on the given port. If the operation is not supported
   by the hardware, this function should return -EOPNOTSUPP to inform the bridge