diff options
author | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-06-15 09:50:17 +0300 |
---|---|---|
committer | Jonathan Corbet <corbet@lwn.net> | 2020-06-19 23:09:17 +0300 |
commit | 9f70e48e1f08e640e276b3818d0b1f971d23fef7 (patch) | |
tree | 3bf111fc36ed2a0325c56fc75e0e5e6c93c56bb0 /Documentation/misc-devices | |
parent | 0e7ade47bb6ecb9eaa8a86222b2257b97be49267 (diff) | |
download | linux-9f70e48e1f08e640e276b3818d0b1f971d23fef7.tar.xz |
docs: misc-devices/apds990x.txt: convert to ReST format
- Adjust title markup;
- Adjust identation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/444743782e5c8b8085d8016c8be3baabe4d23b53.1592203650.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/misc-devices')
-rw-r--r-- | Documentation/misc-devices/apds990x.rst (renamed from Documentation/misc-devices/apds990x.txt) | 31 | ||||
-rw-r--r-- | Documentation/misc-devices/index.rst | 1 |
2 files changed, 25 insertions, 7 deletions
diff --git a/Documentation/misc-devices/apds990x.txt b/Documentation/misc-devices/apds990x.rst index 454d95d623b3..e2f75577f731 100644 --- a/Documentation/misc-devices/apds990x.txt +++ b/Documentation/misc-devices/apds990x.rst @@ -1,3 +1,6 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== Kernel driver apds990x ====================== @@ -50,14 +53,18 @@ chip_id power_state RW - enable / disable chip. Uses counting logic + 1 enables the chip 0 disables the chip lux0_input RO - measured lux value + sysfs_notify called when threshold interrupt occurs lux0_sensor_range - RO - lux0_input max value. Actually never reaches since sensor tends + RO - lux0_input max value. + + Actually never reaches since sensor tends to saturate much before that. Real max value varies depending on the light spectrum etc. @@ -68,7 +75,9 @@ lux0_rate_avail RO - supported measurement rates lux0_calibscale - RW - calibration value. Set to neutral value by default. + RW - calibration value. + + Set to neutral value by default. Output results are multiplied with calibscale / calibscale_default value. @@ -76,16 +85,21 @@ lux0_calibscale_default RO - neutral calibration value lux0_thresh_above_value - RW - HI level threshold value. All results above the value + RW - HI level threshold value. + + All results above the value trigs an interrupt. 65535 (i.e. sensor_range) disables the above interrupt. lux0_thresh_below_value - RW - LO level threshold value. All results below the value + RW - LO level threshold value. + + All results below the value trigs an interrupt. 0 disables the below interrupt. prox0_raw RO - measured proximity value + sysfs_notify called when threshold interrupt occurs prox0_sensor_range @@ -93,11 +107,14 @@ prox0_sensor_range prox0_raw_en RW - enable / disable proximity - uses counting logic - 1 enables the proximity - 0 disables the proximity + + - 1 enables the proximity + - 0 disables the proximity prox0_reporting_mode - RW - trigger / periodic. In "trigger" mode the driver tells two possible + RW - trigger / periodic. + + In "trigger" mode the driver tells two possible values: 0 or prox0_sensor_range value. 0 means no proximity, 1023 means proximity. This causes minimal number of interrupts. In "periodic" mode the driver reports all values above diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index edf66b59f2d4..46072ce3d7ef 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -15,6 +15,7 @@ fit into other categories. :maxdepth: 2 ad525x_dpot + apds990x bh1770glc eeprom c2port |