hwmon: (pmbus) Add pmbus driver for MAX15301

Add pmbus driver support for Maxim MAX15301 InTune Automatically
Compensated Digital PoL Controller with Driver and PMBus Telemetry

Even though the specification does not specifically mention it,
extensive empirical testing has revealed that auto-detection of
limit-registers will fail in a random fashion unless the delay
parameter is set to above about 80us. The default delay is set
to 100us to include some safety margin.

This patch is tested on a Flex BMR461 converter module.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210419101251.24840-1-erik.rosen@metormote.com
[groeck: Added rationale for delay to driver header]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

2 files changed, 88 insertions, 0 deletions

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index d6a050f85477..6bc696fa0ed5 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -115,6 +115,7 @@ Hardware Monitoring Kernel Drivers
    ltc4260
    ltc4261
    max127
+   max15301
    max16064
    max16065
    max1619
diff --git a/Documentation/hwmon/max15301.rst b/Documentation/hwmon/max15301.rst
new file mode 100644
index 000000000000..e3dc22fe1c6d
--- /dev/null
+++ b/Documentation/hwmon/max15301.rst
@@ -0,0 +1,87 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max15301
+======================
+
+Supported chips:
+
+  * Maxim MAX15301
+
+    Prefix: 'max15301', 'bmr461'
+
+    Addresses scanned: -
+
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Maxim MAX15301 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Module parameters
+-----------------
+
+delay
+-----
+
+The controller requires a minimum interval between I2C bus accesses.
+The default interval is set to 100 us. For manual override, the driver
+provides a writeable module parameter, 'delay', which can be used to
+set the interval to a value between 0 and 65,535 microseconds.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in1_label		"vin"
+in1_input		Measured input voltage.
+in1_lcrit		Critical minimum input voltage.
+in1_crit		Critical maximum input voltage.
+in1_lcrit_alarm		Input voltage critical low alarm.
+in1_crit_alarm		Input voltage critical high alarm.
+
+in2_label		"vout1"
+in2_input		Measured output voltage.
+in2_lcrit		Critical minimum output Voltage.
+in2_crit		Critical maximum output voltage.
+in2_lcrit_alarm		Critical output voltage critical low alarm.
+in2_crit_alarm		Critical output voltage critical high alarm.
+
+curr1_label		"iout1"
+curr1_input		Measured output current.
+curr1_crit		Critical maximum output current.
+curr1_crit_alarm	Output current critical high alarm.
+
+temp1_input		Measured maximum temperature of all phases.
+temp1_max		Maximum temperature limit.
+temp1_max_alarm		High temperature alarm.
+temp1_crit		Critical maximum temperature limit.
+temp1_crit_alarm	Critical maximum temperature alarm.
+======================= ========================================================