docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 38 deletions

diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620
deleted file mode 100644
index 2d686b17b547..000000000000
--- a/Documentation/hwmon/ds620
+++ /dev/null
@@ -1,38 +0,0 @@
-Kernel driver ds620
-===================
-
-Supported chips:
-
-  * Dallas Semiconductor DS620
-
-    Prefix: 'ds620'
-
-    Datasheet: Publicly available at the Dallas Semiconductor website
-
-	       http://www.dalsemi.com/
-
-Authors:
-	Roland Stigge <stigge@antcom.de>
-	based on ds1621.c by
-	Christian W. Zuckschwerdt <zany@triq.net>
-
-Description
------------
-
-The DS620 is a (one instance) digital thermometer and thermostat. It has both
-high and low temperature limits which can be user defined (i.e.  programmed
-into non-volatile on-chip registers). Temperature range is -55 degree Celsius
-to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
-returned via sysfs displays post decimal positions.
-
-The thermostat function works as follows: When configured via platform_data
-(struct ds620_platform_data) .pomode == 0 (default), the thermostat output pin
-PO is always low. If .pomode == 1, the thermostat is in PO_LOW mode. I.e., the
-output pin PO becomes active when the temperature falls below temp1_min and
-stays active until the temperature goes above temp1_max.
-
-Likewise, with .pomode == 2, the thermostat is in PO_HIGH mode. I.e., the PO
-output pin becomes active when the temperature goes above temp1_max and stays
-active until the temperature falls below temp1_min.
-
-The PO output pin of the DS620 operates active-low.