Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

 - Documentation conversion to ReST, from Mauro Carvalho Chehab

 - Wacom MobileStudio Pro support, from Ping Cheng

 - Wacom 2nd Gen Intuos Pro Small support, from Aaron Armstrong Skomra

 - assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Add another Primax PIXART OEM mouse quirk
  HID: wacom: generic: add touchring adjustment for 2nd Gen Pro Small
  docs: hid: convert to ReST
  HID: remove NO_D3 flag when remove driver
  HID: wacom: add new MobileStudio Pro support
  HID: wacom: generic: read the number of expected touches on a per collection basis
  HID: wacom: generic: support the 'report valid' usage for touch
  HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report
  HID: wacom: Add 2nd gen Intuos Pro Small support
  HID: uclogic: Add support for Ugee Rainbow CV720
  HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices
  HID: logitech-hidpp: HID: make const array consumer_rdesc_start static
  HID: logitech-dj: make const array template static
  HID: wacom: correct touch resolution x/y typo
  HID: wacom: generic: Correct pad syncing
  HID: wacom: generic: only switch the mode on devices with LEDs
  HID: logitech-dj: Add usb-id for the 27MHz MX3000 receiver

1 files changed, 359 insertions, 0 deletions

diff --git a/Documentation/hid/hid-transport.rst b/Documentation/hid/hid-transport.rst
new file mode 100644
index 000000000000..0fe526f36db6
--- /dev/null
+++ b/Documentation/hid/hid-transport.rst
@@ -0,0 +1,359 @@
+=========================
+HID I/O Transport Drivers
+=========================
+
+The HID subsystem is independent of the underlying transport driver. Initially,
+only USB was supported, but other specifications adopted the HID design and
+provided new transport drivers. The kernel includes at least support for USB,
+Bluetooth, I2C and user-space I/O drivers.
+
+1) HID Bus
+==========
+
+The HID subsystem is designed as a bus. Any I/O subsystem may provide HID
+devices and register them with the HID bus. HID core then loads generic device
+drivers on top of it. The transport drivers are responsible of raw data
+transport and device setup/management. HID core is responsible of
+report-parsing, report interpretation and the user-space API. Device specifics
+and quirks are handled by all layers depending on the quirk.
+
+::
+
+ +-----------+  +-----------+            +-----------+  +-----------+
+ | Device #1 |  | Device #i |            | Device #j |  | Device #k |
+ +-----------+  +-----------+            +-----------+  +-----------+
+          \\      //                              \\      //
+        +------------+                          +------------+
+        | I/O Driver |                          | I/O Driver |
+        +------------+                          +------------+
+              ||                                      ||
+     +------------------+                    +------------------+
+     | Transport Driver |                    | Transport Driver |
+     +------------------+                    +------------------+
+                       \___                ___/
+                           \              /
+                          +----------------+
+                          |    HID Core    |
+                          +----------------+
+                           /  |        |  \
+                          /   |        |   \
+             ____________/    |        |    \_________________
+            /                 |        |                      \
+           /                  |        |                       \
+ +----------------+  +-----------+  +------------------+  +------------------+
+ | Generic Driver |  | MT Driver |  | Custom Driver #1 |  | Custom Driver #2 |
+ +----------------+  +-----------+  +------------------+  +------------------+
+
+Example Drivers:
+
+  - I/O: USB, I2C, Bluetooth-l2cap
+  - Transport: USB-HID, I2C-HID, BT-HIDP
+
+Everything below "HID Core" is simplified in this graph as it is only of
+interest to HID device drivers. Transport drivers do not need to know the
+specifics.
+
+1.1) Device Setup
+-----------------
+
+I/O drivers normally provide hotplug detection or device enumeration APIs to the
+transport drivers. Transport drivers use this to find any suitable HID device.
+They allocate HID device objects and register them with HID core. Transport
+drivers are not required to register themselves with HID core. HID core is never
+aware of which transport drivers are available and is not interested in it. It
+is only interested in devices.
+
+Transport drivers attach a constant "struct hid_ll_driver" object with each
+device. Once a device is registered with HID core, the callbacks provided via
+this struct are used by HID core to communicate with the device.
+
+Transport drivers are responsible of detecting device failures and unplugging.
+HID core will operate a device as long as it is registered regardless of any
+device failures. Once transport drivers detect unplug or failure events, they
+must unregister the device from HID core and HID core will stop using the
+provided callbacks.
+
+1.2) Transport Driver Requirements
+----------------------------------
+
+The terms "asynchronous" and "synchronous" in this document describe the
+transmission behavior regarding acknowledgements. An asynchronous channel must
+not perform any synchronous operations like waiting for acknowledgements or
+verifications. Generally, HID calls operating on asynchronous channels must be
+running in atomic-context just fine.
+On the other hand, synchronous channels can be implemented by the transport
+driver in whatever way they like. They might just be the same as asynchronous
+channels, but they can also provide acknowledgement reports, automatic
+retransmission on failure, etc. in a blocking manner. If such functionality is
+required on asynchronous channels, a transport-driver must implement that via
+its own worker threads.
+
+HID core requires transport drivers to follow a given design. A Transport
+driver must provide two bi-directional I/O channels to each HID device. These
+channels must not necessarily be bi-directional in the hardware itself. A
+transport driver might just provide 4 uni-directional channels. Or it might
+multiplex all four on a single physical channel. However, in this document we
+will describe them as two bi-directional channels as they have several
+properties in common.
+
+ - Interrupt Channel (intr): The intr channel is used for asynchronous data
+   reports. No management commands or data acknowledgements are sent on this
+   channel. Any unrequested incoming or outgoing data report must be sent on
+   this channel and is never acknowledged by the remote side. Devices usually
+   send their input events on this channel. Outgoing events are normally
+   not send via intr, except if high throughput is required.
+ - Control Channel (ctrl): The ctrl channel is used for synchronous requests and
+   device management. Unrequested data input events must not be sent on this
+   channel and are normally ignored. Instead, devices only send management
+   events or answers to host requests on this channel.
+   The control-channel is used for direct blocking queries to the device
+   independent of any events on the intr-channel.
+   Outgoing reports are usually sent on the ctrl channel via synchronous
+   SET_REPORT requests.
+
+Communication between devices and HID core is mostly done via HID reports. A
+report can be of one of three types:
+
+ - INPUT Report: Input reports provide data from device to host. This
+   data may include button events, axis events, battery status or more. This
+   data is generated by the device and sent to the host with or without
+   requiring explicit requests. Devices can choose to send data continuously or
+   only on change.
+ - OUTPUT Report: Output reports change device states. They are sent from host
+   to device and may include LED requests, rumble requests or more. Output
+   reports are never sent from device to host, but a host can retrieve their
+   current state.
+   Hosts may choose to send output reports either continuously or only on
+   change.
+ - FEATURE Report: Feature reports are used for specific static device features
+   and never reported spontaneously. A host can read and/or write them to access
+   data like battery-state or device-settings.
+   Feature reports are never sent without requests. A host must explicitly set
+   or retrieve a feature report. This also means, feature reports are never sent
+   on the intr channel as this channel is asynchronous.
+
+INPUT and OUTPUT reports can be sent as pure data reports on the intr channel.
+For INPUT reports this is the usual operational mode. But for OUTPUT reports,
+this is rarely done as OUTPUT reports are normally quite scarce. But devices are
+free to make excessive use of asynchronous OUTPUT reports (for instance, custom
+HID audio speakers make great use of it).
+
+Plain reports must not be sent on the ctrl channel, though. Instead, the ctrl
+channel provides synchronous GET/SET_REPORT requests. Plain reports are only
+allowed on the intr channel and are the only means of data there.
+
+ - GET_REPORT: A GET_REPORT request has a report ID as payload and is sent
+   from host to device. The device must answer with a data report for the
+   requested report ID on the ctrl channel as a synchronous acknowledgement.
+   Only one GET_REPORT request can be pending for each device. This restriction
+   is enforced by HID core as several transport drivers don't allow multiple
+   simultaneous GET_REPORT requests.
+   Note that data reports which are sent as answer to a GET_REPORT request are
+   not handled as generic device events. That is, if a device does not operate
+   in continuous data reporting mode, an answer to GET_REPORT does not replace
+   the raw data report on the intr channel on state change.
+   GET_REPORT is only used by custom HID device drivers to query device state.
+   Normally, HID core caches any device state so this request is not necessary
+   on devices that follow the HID specs except during device initialization to
+   retrieve the current state.
+   GET_REPORT requests can be sent for any of the 3 report types and shall
+   return the current report state of the device. However, OUTPUT reports as
+   payload may be blocked by the underlying transport driver if the
+   specification does not allow them.
+ - SET_REPORT: A SET_REPORT request has a report ID plus data as payload. It is
+   sent from host to device and a device must update it's current report state
+   according to the given data. Any of the 3 report types can be used. However,
+   INPUT reports as payload might be blocked by the underlying transport driver
+   if the specification does not allow them.
+   A device must answer with a synchronous acknowledgement. However, HID core
+   does not require transport drivers to forward this acknowledgement to HID
+   core.
+   Same as for GET_REPORT, only one SET_REPORT can be pending at a time. This
+   restriction is enforced by HID core as some transport drivers do not support
+   multiple synchronous SET_REPORT requests.
+
+Other ctrl-channel requests are supported by USB-HID but are not available
+(or deprecated) in most other transport level specifications:
+
+ - GET/SET_IDLE: Only used by USB-HID and I2C-HID.
+ - GET/SET_PROTOCOL: Not used by HID core.
+ - RESET: Used by I2C-HID, not hooked up in HID core.
+ - SET_POWER: Used by I2C-HID, not hooked up in HID core.
+
+2) HID API
+==========
+
+2.1) Initialization
+-------------------
+
+Transport drivers normally use the following procedure to register a new device
+with HID core::
+
+	struct hid_device *hid;
+	int ret;
+
+	hid = hid_allocate_device();
+	if (IS_ERR(hid)) {
+		ret = PTR_ERR(hid);
+		goto err_<...>;
+	}
+
+	strscpy(hid->name, <device-name-src>, sizeof(hid->name));
+	strscpy(hid->phys, <device-phys-src>, sizeof(hid->phys));
+	strscpy(hid->uniq, <device-uniq-src>, sizeof(hid->uniq));
+
+	hid->ll_driver = &custom_ll_driver;
+	hid->bus = <device-bus>;
+	hid->vendor = <device-vendor>;
+	hid->product = <device-product>;
+	hid->version = <device-version>;
+	hid->country = <device-country>;
+	hid->dev.parent = <pointer-to-parent-device>;
+	hid->driver_data = <transport-driver-data-field>;
+
+	ret = hid_add_device(hid);
+	if (ret)
+		goto err_<...>;
+
+Once hid_add_device() is entered, HID core might use the callbacks provided in
+"custom_ll_driver". Note that fields like "country" can be ignored by underlying
+transport-drivers if not supported.
+
+To unregister a device, use::
+
+	hid_destroy_device(hid);
+
+Once hid_destroy_device() returns, HID core will no longer make use of any
+driver callbacks.
+
+2.2) hid_ll_driver operations
+-----------------------------
+
+The available HID callbacks are:
+
+   ::
+
+      int (*start) (struct hid_device *hdev)
+
+   Called from HID device drivers once they want to use the device. Transport
+   drivers can choose to setup their device in this callback. However, normally
+   devices are already set up before transport drivers register them to HID core
+   so this is mostly only used by USB-HID.
+
+   ::
+
+      void (*stop) (struct hid_device *hdev)
+
+   Called from HID device drivers once they are done with a device. Transport
+   drivers can free any buffers and deinitialize the device. But note that
+   ->start() might be called again if another HID device driver is loaded on the
+   device.
+
+   Transport drivers are free to ignore it and deinitialize devices after they
+   destroyed them via hid_destroy_device().
+
+   ::
+
+      int (*open) (struct hid_device *hdev)
+
+   Called from HID device drivers once they are interested in data reports.
+   Usually, while user-space didn't open any input API/etc., device drivers are
+   not interested in device data and transport drivers can put devices asleep.
+   However, once ->open() is called, transport drivers must be ready for I/O.
+   ->open() calls are nested for each client that opens the HID device.
+
+   ::
+
+      void (*close) (struct hid_device *hdev)
+
+   Called from HID device drivers after ->open() was called but they are no
+   longer interested in device reports. (Usually if user-space closed any input
+   devices of the driver).
+
+   Transport drivers can put devices asleep and terminate any I/O of all
+   ->open() calls have been followed by a ->close() call. However, ->start() may
+   be called again if the device driver is interested in input reports again.
+
+   ::
+
+      int (*parse) (struct hid_device *hdev)
+
+   Called once during device setup after ->start() has been called. Transport
+   drivers must read the HID report-descriptor from the device and tell HID core
+   about it via hid_parse_report().
+
+   ::
+
+      int (*power) (struct hid_device *hdev, int level)
+
+   Called by HID core to give PM hints to transport drivers. Usually this is
+   analogical to the ->open() and ->close() hints and redundant.
+
+   ::
+
+      void (*request) (struct hid_device *hdev, struct hid_report *report,
+		       int reqtype)
+
+   Send an HID request on the ctrl channel. "report" contains the report that
+   should be sent and "reqtype" the request type. Request-type can be
+   HID_REQ_SET_REPORT or HID_REQ_GET_REPORT.
+
+   This callback is optional. If not provided, HID core will assemble a raw
+   report following the HID specs and send it via the ->raw_request() callback.
+   The transport driver is free to implement this asynchronously.
+
+   ::
+
+      int (*wait) (struct hid_device *hdev)
+
+   Used by HID core before calling ->request() again. A transport driver can use
+   it to wait for any pending requests to complete if only one request is
+   allowed at a time.
+
+   ::
+
+      int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
+                          __u8 *buf, size_t count, unsigned char rtype,
+                          int reqtype)
+
+   Same as ->request() but provides the report as raw buffer. This request shall
+   be synchronous. A transport driver must not use ->wait() to complete such
+   requests. This request is mandatory and hid core will reject the device if
+   it is missing.
+
+   ::
+
+      int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+
+   Send raw output report via intr channel. Used by some HID device drivers
+   which require high throughput for outgoing requests on the intr channel. This
+   must not cause SET_REPORT calls! This must be implemented as asynchronous
+   output report on the intr channel!
+
+   ::
+
+      int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+
+   Perform SET/GET_IDLE request. Only used by USB-HID, do not implement!
+
+2.3) Data Path
+--------------
+
+Transport drivers are responsible of reading data from I/O devices. They must
+handle any I/O-related state-tracking themselves. HID core does not implement
+protocol handshakes or other management commands which can be required by the
+given HID transport specification.
+
+Every raw data packet read from a device must be fed into HID core via
+hid_input_report(). You must specify the channel-type (intr or ctrl) and report
+type (input/output/feature). Under normal conditions, only input reports are
+provided via this API.
+
+Responses to GET_REPORT requests via ->request() must also be provided via this
+API. Responses to ->raw_request() are synchronous and must be intercepted by the
+transport driver and not passed to hid_input_report().
+Acknowledgements to SET_REPORT requests are not of interest to HID core.
+
+----------------------------------------------------
+
+Written 2013, David Herrmann <dh.herrmann@gmail.com>