summaryrefslogtreecommitdiff
path: root/Documentation/filesystems/ext4.txt
diff options
context:
space:
mode:
authorDave Kleikamp <shaggy@austin.ibm.com>2006-10-11 12:21:25 +0400
committerLinus Torvalds <torvalds@g5.osdl.org>2006-10-11 22:14:19 +0400
commitfc513a333b45f8913d40c8241a0cb61be79e1c60 (patch)
tree1abd23dd907da0ca29ff0511aeda238efbaa8662 /Documentation/filesystems/ext4.txt
parent63f5793351d821749979e36889f9c089c6028c83 (diff)
downloadlinux-fc513a333b45f8913d40c8241a0cb61be79e1c60.tar.xz
[PATCH] Documentation/filesystems/ext4.txt
This file, ext4.txt, was put together with information from Andrew Morton, Andreas Dilger, Suparna Bhattacharya, and Ted Ts'o. I copied the mount options, with the exception of "extents", from ext3.txt, so if anyone is aware of anything out-of-date, please let me know. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'Documentation/filesystems/ext4.txt')
-rw-r--r--Documentation/filesystems/ext4.txt236
1 files changed, 236 insertions, 0 deletions
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
new file mode 100644
index 000000000000..6a4adcae9f9a
--- /dev/null
+++ b/Documentation/filesystems/ext4.txt
@@ -0,0 +1,236 @@
+
+Ext4 Filesystem
+===============
+
+This is a development version of the ext4 filesystem, an advanced level
+of the ext3 filesystem which incorporates scalability and reliability
+enhancements for supporting large filesystems (64 bit) in keeping with
+increasing disk capacities and state-of-the-art feature requirements.
+
+Mailing list: linux-ext4@vger.kernel.org
+
+
+1. Quick usage instructions:
+===========================
+
+ - Grab updated e2fsprogs from
+ ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs-interim/
+ This is a patchset on top of e2fsprogs-1.39, which can be found at
+ ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/
+
+ - It's still mke2fs -j /dev/hda1
+
+ - mount /dev/hda1 /wherever -t ext4dev
+
+ - To enable extents,
+
+ mount /dev/hda1 /wherever -t ext4dev -o extents
+
+ - The filesystem is compatible with the ext3 driver until you add a file
+ which has extents (ie: `mount -o extents', then create a file).
+
+ NOTE: The "extents" mount flag is temporary. It will soon go away and
+ extents will be enabled by the "-o extents" flag to mke2fs or tune2fs
+
+ - When comparing performance with other filesystems, remember that
+ ext3/4 by default offers higher data integrity guarantees than most. So
+ when comparing with a metadata-only journalling filesystem, use `mount -o
+ data=writeback'. And you might as well use `mount -o nobh' too along
+ with it. Making the journal larger than the mke2fs default often helps
+ performance with metadata-intensive workloads.
+
+2. Features
+===========
+
+2.1 Currently available
+
+* ability to use filesystems > 16TB
+* extent format reduces metadata overhead (RAM, IO for access, transactions)
+* extent format more robust in face of on-disk corruption due to magics,
+* internal redunancy in tree
+
+2.1 Previously available, soon to be enabled by default by "mkefs.ext4":
+
+* dir_index and resize inode will be on by default
+* large inodes will be used by default for fast EAs, nsec timestamps, etc
+
+2.2 Candidate features for future inclusion
+
+There are several under discussion, whether they all make it in is
+partly a function of how much time everyone has to work on them:
+
+* improved file allocation (multi-block alloc, delayed alloc; basically done)
+* fix 32000 subdirectory limit (patch exists, needs some e2fsck work)
+* nsec timestamps for mtime, atime, ctime, create time (patch exists,
+ needs some e2fsck work)
+* inode version field on disk (NFSv4, Lustre; prototype exists)
+* reduced mke2fs/e2fsck time via uninitialized groups (prototype exists)
+* journal checksumming for robustness, performance (prototype exists)
+* persistent file preallocation (e.g for streaming media, databases)
+
+Features like metadata checksumming have been discussed and planned for
+a bit but no patches exist yet so I'm not sure they're in the near-term
+roadmap.
+
+The big performance win will come with mballoc and delalloc. CFS has
+been using mballoc for a few years already with Lustre, and IBM + Bull
+did a lot of benchmarking on it. The reason it isn't in the first set of
+patches is partly a manageability issue, and partly because it doesn't
+directly affect the on-disk format (outside of much better allocation)
+so it isn't critical to get into the first round of changes. I believe
+Alex is working on a new set of patches right now.
+
+3. Options
+==========
+
+When mounting an ext4 filesystem, the following option are accepted:
+(*) == default
+
+extents ext4 will use extents to address file data. The
+ file system will no longer be mountable by ext3.
+
+journal=update Update the ext4 file system's journal to the current
+ format.
+
+journal=inum When a journal already exists, this option is ignored.
+ Otherwise, it specifies the number of the inode which
+ will represent the ext4 file system's journal file.
+
+journal_dev=devnum When the external journal device's major/minor numbers
+ have changed, this option allows the user to specify
+ the new journal location. The journal device is
+ identified through its new major/minor numbers encoded
+ in devnum.
+
+noload Don't load the journal on mounting.
+
+data=journal All data are committed into the journal prior to being
+ written into the main file system.
+
+data=ordered (*) All data are forced directly out to the main file
+ system prior to its metadata being committed to the
+ journal.
+
+data=writeback Data ordering is not preserved, data may be written
+ into the main file system after its metadata has been
+ committed to the journal.
+
+commit=nrsec (*) Ext4 can be told to sync all its data and metadata
+ every 'nrsec' seconds. The default value is 5 seconds.
+ This means that if you lose your power, you will lose
+ as much as the latest 5 seconds of work (your
+ filesystem will not be damaged though, thanks to the
+ journaling). This default value (or any low value)
+ will hurt performance, but it's good for data-safety.
+ Setting it to 0 will have the same effect as leaving
+ it at the default (5 seconds).
+ Setting it to very large values will improve
+ performance.
+
+barrier=1 This enables/disables barriers. barrier=0 disables
+ it, barrier=1 enables it.
+
+orlov (*) This enables the new Orlov block allocator. It is
+ enabled by default.
+
+oldalloc This disables the Orlov block allocator and enables
+ the old block allocator. Orlov should have better
+ performance - we'd like to get some feedback if it's
+ the contrary for you.
+
+user_xattr Enables Extended User Attributes. Additionally, you
+ need to have extended attribute support enabled in the
+ kernel configuration (CONFIG_EXT4_FS_XATTR). See the
+ attr(5) manual page and http://acl.bestbits.at/ to
+ learn more about extended attributes.
+
+nouser_xattr Disables Extended User Attributes.
+
+acl Enables POSIX Access Control Lists support.
+ Additionally, you need to have ACL support enabled in
+ the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL).
+ See the acl(5) manual page and http://acl.bestbits.at/
+ for more information.
+
+noacl This option disables POSIX Access Control List
+ support.
+
+reservation
+
+noreservation
+
+bsddf (*) Make 'df' act like BSD.
+minixdf Make 'df' act like Minix.
+
+check=none Don't do extra checking of bitmaps on mount.
+nocheck
+
+debug Extra debugging information is sent to syslog.
+
+errors=remount-ro(*) Remount the filesystem read-only on an error.
+errors=continue Keep going on a filesystem error.
+errors=panic Panic and halt the machine if an error occurs.
+
+grpid Give objects the same group ID as their creator.
+bsdgroups
+
+nogrpid (*) New objects have the group ID of their creator.
+sysvgroups
+
+resgid=n The group ID which may use the reserved blocks.
+
+resuid=n The user ID which may use the reserved blocks.
+
+sb=n Use alternate superblock at this location.
+
+quota
+noquota
+grpquota
+usrquota
+
+bh (*) ext4 associates buffer heads to data pages to
+nobh (a) cache disk block mapping information
+ (b) link pages into transaction to provide
+ ordering guarantees.
+ "bh" option forces use of buffer heads.
+ "nobh" option tries to avoid associating buffer
+ heads (supported only for "writeback" mode).
+
+
+Data Mode
+---------
+There are 3 different data modes:
+
+* writeback mode
+In data=writeback mode, ext4 does not journal data at all. This mode provides
+a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
+mode - metadata journaling. A crash+recovery can cause incorrect data to
+appear in files which were written shortly before the crash. This mode will
+typically provide the best ext4 performance.
+
+* ordered mode
+In data=ordered mode, ext4 only officially journals metadata, but it logically
+groups metadata and data blocks into a single unit called a transaction. When
+it's time to write the new metadata out to disk, the associated data blocks
+are written first. In general, this mode performs slightly slower than
+writeback but significantly faster than journal mode.
+
+* journal mode
+data=journal mode provides full data and metadata journaling. All new data is
+written to the journal first, and then to its final location.
+In the event of a crash, the journal can be replayed, bringing both data and
+metadata into a consistent state. This mode is the slowest except when data
+needs to be read from and written to disk at the same time where it
+outperforms all others modes.
+
+References
+==========
+
+kernel source: <file:fs/ext4/>
+ <file:fs/jbd2/>
+
+programs: http://e2fsprogs.sourceforge.net/
+ http://ext2resize.sourceforge.net
+
+useful links: http://fedoraproject.org/wiki/ext3-devel
+ http://www.bullopensource.org/ext4/