Merge tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:
 "Here is a stash of pin control changes I have collected for the v3.19
  series.  Mainly new hardware support, with Intels new embedded SoC as
  the especially interesting thing standing out, fully using the
  subsystem.

   - Force conversion of the ux500 pin control device trees and parsers
     to use the generic pin control bindings.
   - New driver and device tree bindings for the Qualcomm PMIC MPP pin
     controller and GPIO.
   - Some ACPI infrastructure for pin controllers.
   - New driver for the Intel CherryView/Braswell pin controller, the
     first Intel pin controller to fully take advantage of the pin
     control subsystem.
   - Support the Freescale i.MX VF610 variant.
   - Support the sunxi A80 variant.
   - Support the Samsung Exynos 4415 and Exynos 7 variants.
   - Split out Intel pin controllers to their own subdirectory.
   - A large slew of rockchip pin control updates, including
     suspend/resume support.
   - A large slew of Samsung Exynos pin controller updates.
   - Various minor updates and fixes"

* tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (49 commits)
  pinctrl: at91: enhance (debugfs) at91_gpio_dbg_show
  pinctrl: meson: add device tree bindings documentation
  gpio: tz1090: Fix error handling of irq_of_parse_and_map
  pinctrl: tz1090-pinctrl.txt: Fix typo in binding
  pinctrl: pinconf-generic: Declare dt_params/conf_items const
  pinctrl: exynos: Add support for Exynos4415
  pinctrl: exynos: Add initial driver data for Exynos7
  pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts
  pinctrl: exynos: Consolidate irq domain callbacks
  pinctrl: exynos: Generalize the eint16_31 demux code
  pinctrl: samsung: Separate per-bank init and runtime data
  pinctrl: samsung: Constify samsung_pin_ctrl struct
  pinctrl: samsung: Constify samsung_pin_bank_type struct
  pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct
  pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR()
  pinctrl: Add Intel Cherryview/Braswell pin controller support
  gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod()
  pinctrl: Fix path error in documentation
  pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
  pinctrl: rockchip: add suspend/resume functions
  ...

7 files changed, 553 insertions, 111 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
index 49d0e6050940..509faa87ad0e 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
@@ -67,7 +67,7 @@ Valid values for pin and group names are:
     They also all support the some form of muxing. Any pins which are contained
     in one of the mux groups (see below) can be muxed only to the functions
     supported by the mux group. All other pins can be muxed to the "perip"
-    function which which enables them with their intended peripheral.
+    function which enables them with their intended peripheral.
 
     Different pins in the same mux group cannot be muxed to different functions,
     however it is possible to mux only a subset of the pins in a mux group to a
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
new file mode 100644
index 000000000000..17e7240c6998
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -0,0 +1,96 @@
+== Amlogic Meson pinmux controller ==
+
+Required properties for the root node:
+ - compatible: "amlogic,meson8-pinctrl"
+ - reg: address and size of registers controlling irq functionality
+
+=== GPIO sub-nodes ===
+
+The 2 power domains of the controller (regular and always-on) are
+represented as sub-nodes and each of them acts as a GPIO controller.
+
+Required properties for sub-nodes are:
+ - reg: should contain address and size for mux, pull-enable, pull and
+   gpio register sets
+ - reg-names: an array of strings describing the "reg" entries. Must
+   contain "mux", "pull" and "gpio". "pull-enable" is optional and
+   when it is missing the "pull" registers are used instead
+ - gpio-controller: identifies the node as a gpio controller
+ - #gpio-cells: must be 2
+
+Valid sub-node names are:
+ - "banks" for the regular domain
+ - "ao-bank" for the always-on domain
+
+=== Other sub-nodes ===
+
+Child nodes without the "gpio-controller" represent some desired
+configuration for a pin or a group. Those nodes can be pinmux nodes or
+configuration nodes.
+
+Required properties for pinmux nodes are:
+ - groups: a list of pinmux groups. The list of all available groups
+   depends on the SoC and can be found in driver sources.
+ - function: the name of a function to activate for the specified set
+   of groups. The list of all available functions depends on the SoC
+   and can be found in driver sources.
+
+Required properties for configuration nodes:
+ - pins: a list of pin names
+
+Configuration nodes support the generic properties "bias-disable",
+"bias-pull-up" and "bias-pull-down", described in file
+pinctrl-bindings.txt
+
+=== Example ===
+
+	pinctrl: pinctrl@c1109880 {
+		compatible = "amlogic,meson8-pinctrl";
+		reg = <0xc1109880 0x10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio: banks@c11080b0 {
+			reg = <0xc11080b0 0x28>,
+			      <0xc11080e8 0x18>,
+			      <0xc1108120 0x18>,
+			      <0xc1108030 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+               };
+
+		gpio_ao: ao-bank@c1108030 {
+			reg = <0xc8100014 0x4>,
+			      <0xc810002c 0x4>,
+			      <0xc8100024 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		nand {
+			mux {
+				groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
+					 "nand_io_rb0", "nand_ale", "nand_cle",
+					 "nand_wen_clk", "nand_ren_clk", "nand_dqs",
+					 "nand_ce2", "nand_ce3";
+				function = "nand";
+			};
+		};
+
+		uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a",
+					 "uart_cts_ao_a", "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+
+			conf {
+				pins = "GPIOAO_0", "GPIOAO_1",
+				       "GPIOAO_2", "GPIOAO_3";
+				bias-disable;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 98eb94d91a1c..47d84b6ee91b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -216,4 +216,4 @@ arguments are described below.
   or 0 to disable debouncing
 
 More in-depth documentation on these parameters can be found in
-<include/linux/pinctrl/pinconfig-generic.h>
+<include/linux/pinctrl/pinconf-generic.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
new file mode 100644
index 000000000000..7ed08048516a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -0,0 +1,215 @@
+Qualcomm PMIC GPIO block
+
+This binding describes the GPIO block(s) found in the 8xxx series of
+PMIC's from Qualcomm.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8018-gpio"
+		    "qcom,pm8038-gpio"
+		    "qcom,pm8058-gpio"
+		    "qcom,pm8917-gpio"
+		    "qcom,pm8921-gpio"
+		    "qcom,pm8941-gpio"
+		    "qcom,pma8084-gpio"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register base of the GPIO block and length.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Must contain an array of encoded interrupt specifiers for
+		    each available GPIO
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: Mark the device node as a GPIO controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 2;
+		    the first cell will be used to define gpio number and the
+		    second denotes the flags for this gpio
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin or a list of pins. This configuration can include the
+mux function to select on those pin(s), and various pin configuration
+parameters, as listed below.
+
+
+SUBNODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio1-gpio6 for pm8018
+		    gpio1-gpio12 for pm8038
+		    gpio1-gpio40 for pm8058
+		    gpio1-gpio38 for pm8917
+		    gpio1-gpio44 for pm8921
+		    gpio1-gpio36 for pm8941
+		    gpio1-gpio22 for pma8084
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins.  Valid values are:
+		    "normal",
+		    "paired",
+		    "func1",
+		    "func2",
+		    "dtest1",
+		    "dtest2",
+		    "dtest3",
+		    "dtest4"
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <empty>
+	Definition: The specified pins should be configured as pull up.
+
+- qcom,pull-up-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Specifies the strength to use for pull up, if selected.
+		    Valid values are; as defined in
+		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>:
+		    1: 30uA                     (PMIC_GPIO_PULL_UP_30)
+		    2: 1.5uA                    (PMIC_GPIO_PULL_UP_1P5)
+		    3: 31.5uA                   (PMIC_GPIO_PULL_UP_31P5)
+		    4: 1.5uA + 30uA boost       (PMIC_GPIO_PULL_UP_1P5_30)
+		    If this property is ommited 30uA strength will be used if
+		    pull up is selected
+
+- bias-high-impedance:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins will put in high-Z mode and disabled.
+
+- input-enable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are put in input mode.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+
+- power-source:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the power source for the specified pins. Valid
+		    power sources are defined per chip in
+		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+- qcom,drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins. Value
+		    drive strengths are:
+		    0: no (PMIC_GPIO_STRENGTH_NO)
+		    1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V
+		    2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V
+		    3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V
+		    as defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+- drive-push-pull:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in push-pull mode.
+
+- drive-open-drain:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in open-drain mode.
+
+- drive-open-source:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in open-source mode.
+
+Example:
+
+	pm8921_gpio: gpio@150 {
+		compatible = "qcom,pm8921-gpio";
+		reg = <0x150 0x160>;
+		interrupts = <192 1>, <193 1>, <194 1>,
+			     <195 1>, <196 1>, <197 1>,
+			     <198 1>, <199 1>, <200 1>,
+			     <201 1>, <202 1>, <203 1>,
+			     <204 1>, <205 1>, <206 1>,
+			     <207 1>, <208 1>, <209 1>,
+			     <210 1>, <211 1>, <212 1>,
+			     <213 1>, <214 1>, <215 1>,
+			     <216 1>, <217 1>, <218 1>,
+			     <219 1>, <220 1>, <221 1>,
+			     <222 1>, <223 1>, <224 1>,
+			     <225 1>, <226 1>, <227 1>,
+			     <228 1>, <229 1>, <230 1>,
+			     <231 1>, <232 1>, <233 1>,
+			     <234 1>, <235 1>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		pm8921_gpio_keys: gpio-keys {
+			volume-keys {
+				pins = "gpio20", "gpio21";
+				function = "normal";
+
+				input-enable;
+				bias-pull-up;
+				drive-push-pull;
+				qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+				power-source = <PM8921_GPIO_S4>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
new file mode 100644
index 000000000000..854774b194ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
@@ -0,0 +1,162 @@
+Qualcomm PMIC Multi-Purpose Pin (MPP) block
+
+This binding describes the MPP block(s) found in the 8xxx series
+of PMIC's from Qualcomm.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: Should contain one of:
+		    "qcom,pm8841-mpp",
+		    "qcom,pm8941-mpp",
+		    "qcom,pma8084-mpp",
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register base of the MPP block and length.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Must contain an array of encoded interrupt specifiers for
+		    each available MPP
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: Mark the device node as a GPIO controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 2;
+		    the first cell will be used to define MPP number and the
+		    second denotes the flags for this MPP
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin or a list of pins. This configuration can include the
+mux function to select on those pin(s), and various pin configuration
+parameters, as listed below.
+
+SUBNODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of MPP pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    mpp1-mpp4 for pm8841
+		    mpp1-mpp8 for pm8941
+		    mpp1-mpp4 for pma8084
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins.  Valid values are:
+		    "normal",
+		    "paired",
+		    "dtest1",
+		    "dtest2",
+		    "dtest3",
+		    "dtest4"
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <u32>
+	Definition: The specified pins should be configured as pull up.
+		    Valid values are 600, 10000 and 30000 in bidirectional mode
+		    only, i.e. when operating in qcom,analog-mode and input and
+		    outputs are enabled. The hardware ignores the configuration
+		    when operating in other modes.
+
+- bias-high-impedance:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins will put in high-Z mode and disabled.
+
+- input-enable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are put in input mode, i.e. their input
+		    buffer is enabled
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+
+- power-source:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the power source for the specified pins. Valid power
+		    sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+- qcom,analog-mode:
+	Usage: optional
+	Value type: <none>
+	Definition: Selects Analog mode of operation: combined with input-enable
+		    and/or output-high, output-low MPP could operate as
+		    Bidirectional Logic, Analog Input, Analog Output.
+
+- qcom,amux-route:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the source for analog input. Valid values are
+		    defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+		    PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
+
+Example:
+
+	mpps@a000 {
+		compatible = "qcom,pm8841-mpp";
+		reg = <0xa000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8841_default>;
+
+		pm8841_default: default {
+			gpio {
+				pins = "mpp1", "mpp2", "mpp3", "mpp4";
+				function = "normal";
+				input-enable;
+				power-source = <PM8841_MPP_S3>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e82aaf492517..8425838a6dff 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -18,6 +18,7 @@ Required Properties:
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
   - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
+  - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
@@ -136,6 +137,8 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
        found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
+     - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung Exynos7 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
      wakeup interrupts are forwarded to.
    - interrupts: interrupt used by multiplexed wakeup interrupts.
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
index e3865e136067..87697420439e 100644
--- a/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
@@ -8,42 +8,8 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as input, output, pull up, pull down...
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Required subnode-properties:
-- ste,pins : An array of strings. Each string contains the name of a pin or
-    group.
-
-Optional subnode-properties:
-- ste,function: A string containing the name of the function to mux to the
-  pin or group.
-
-- generic pin configuration option to use. Example :
-
-	default_cfg {
-		ste,pins = "GPIO1";
-		bias-disable;
-	};
-
-- ste,config: Handle of pin configuration node containing the generic
-  pinconfig options to use, as described in pinctrl-bindings.txt in
-  this directory. Example :
-
-	pcfg_bias_disable: pcfg_bias_disable {
-		bias-disable;
-	};
-
-	default_cfg {
-		ste,pins = "GPIO1";
-		ste.config = <&pcfg_bias_disable>;
-	};
+ST Ericsson's pin configuration nodes use the generic pin multiplexing
+and pin configuration bindings, see pinctrl-bindings.txt
 
 Example board file extract:
 
@@ -54,11 +20,11 @@ Example board file extract:
 	sysclkreq2 {
 		sysclkreq2_default_mode: sysclkreq2_default {
 			default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq2_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq2_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO1";
+				pins = "GPIO1";
 				bias-disable;
 			};
 		};
@@ -66,11 +32,11 @@ Example board file extract:
 	sysclkreq3 {
 		sysclkreq3_default_mode: sysclkreq3_default {
 			default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq3_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq3_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO2";
+				pins = "GPIO2";
 				output-low;
 			};
 		};
@@ -78,11 +44,11 @@ Example board file extract:
 	gpio3 {
 		gpio3_default_mode: gpio3_default {
 			default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio3_a_1";
+				function = "gpio";
+				groups = "gpio3_a_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO3";
+				pins = "GPIO3";
 				output-low;
 			};
 		};
@@ -90,11 +56,11 @@ Example board file extract:
 	sysclkreq6 {
 		sysclkreq6_default_mode: sysclkreq6_default {
 			default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq6_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq6_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO4";
+				pins = "GPIO4";
 				bias-disable;
 			};
 		};
@@ -102,11 +68,11 @@ Example board file extract:
 	pwmout1 {
 		pwmout1_default_mode: pwmout1_default {
 			default_mux {
-				ste,function = "pwmout";
-				ste,pins = "pwmout1_d_1";
+				function = "pwmout";
+				groups = "pwmout1_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO14";
+				pins = "GPIO14";
 				output-low;
 			};
 		};
@@ -114,11 +80,11 @@ Example board file extract:
 	pwmout2 {
 		pwmout2_default_mode: pwmout2_default {
 			pwmout2_default_mux {
-				ste,function = "pwmout";
-				ste,pins = "pwmout2_d_1";
+				function = "pwmout";
+				groups = "pwmout2_d_1";
 			};
 			pwmout2_default_cfg {
-				ste,pins = "GPIO15";
+				pins = "GPIO15";
 				output-low;
 			};
 		};
@@ -126,11 +92,11 @@ Example board file extract:
 	pwmout3 {
 		pwmout3_default_mode: pwmout3_default {
 			pwmout3_default_mux {
-				ste,function = "pwmout";
-				ste,pins = "pwmout3_d_1";
+				function = "pwmout";
+				groups = "pwmout3_d_1";
 			};
 			pwmout3_default_cfg {
-				ste,pins = "GPIO16";
+				pins = "GPIO16";
 				output-low;
 			};
 		};
@@ -139,15 +105,15 @@ Example board file extract:
 
 		adi1_default_mode: adi1_default {
 			adi1_default_mux {
-				ste,function = "adi1";
-				ste,pins = "adi1_d_1";
+				function = "adi1";
+				groups = "adi1_d_1";
 			};
 			adi1_default_cfg1 {
-				ste,pins = "GPIO17","GPIO19","GPIO20";
+				pins = "GPIO17","GPIO19","GPIO20";
 				bias-disable;
 			};
 			adi1_default_cfg2 {
-				ste,pins = "GPIO18";
+				pins = "GPIO18";
 				output-low;
 			};
 		};
@@ -155,15 +121,15 @@ Example board file extract:
 	dmic12 {
 		dmic12_default_mode: dmic12_default {
 			dmic12_default_mux {
-				ste,function = "dmic";
-				ste,pins = "dmic12_d_1";
+				function = "dmic";
+				groups = "dmic12_d_1";
 			};
 			dmic12_default_cfg1 {
-				ste,pins = "GPIO27";
+				pins = "GPIO27";
 				output-low;
 			};
 			dmic12_default_cfg2 {
-				ste,pins = "GPIO28";
+				pins = "GPIO28";
 				bias-disable;
 			};
 		};
@@ -171,15 +137,15 @@ Example board file extract:
 	dmic34 {
 		dmic34_default_mode: dmic34_default {
 			dmic34_default_mux {
-				ste,function = "dmic";
-				ste,pins = "dmic34_d_1";
+				function = "dmic";
+				groups = "dmic34_d_1";
 			};
 			dmic34_default_cfg1 {
-				ste,pins = "GPIO29";
+				pins = "GPIO29";
 				output-low;
 			};
 			dmic34_default_cfg2 {
-				ste,pins = "GPIO30";
+				pins = "GPIO30";
 				bias-disable;{
 
 			};
@@ -188,15 +154,15 @@ Example board file extract:
 	dmic56 {
 		dmic56_default_mode: dmic56_default {
 			dmic56_default_mux {
-				ste,function = "dmic";
-				ste,pins = "dmic56_d_1";
+				function = "dmic";
+				groups = "dmic56_d_1";
 			};
 			dmic56_default_cfg1 {
-				ste,pins = "GPIO31";
+				pins = "GPIO31";
 				output-low;
 			};
 			dmic56_default_cfg2 {
-				ste,pins = "GPIO32";
+				pins = "GPIO32";
 				bias-disable;
 			};
 		};
@@ -204,11 +170,11 @@ Example board file extract:
 	sysclkreq5 {
 		sysclkreq5_default_mode: sysclkreq5_default {
 			sysclkreq5_default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq5_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq5_d_1";
 			};
 			sysclkreq5_default_cfg {
-				ste,pins = "GPIO42";
+				pins = "GPIO42";
 				output-low;
 			};
 		};
@@ -216,11 +182,11 @@ Example board file extract:
 	batremn {
 		batremn_default_mode: batremn_default {
 			batremn_default_mux {
-				ste,function = "batremn";
-				ste,pins = "batremn_d_1";
+				function = "batremn";
+				groups = "batremn_d_1";
 			};
 			batremn_default_cfg {
-				ste,pins = "GPIO43";
+				pins = "GPIO43";
 				bias-disable;
 			};
 		};
@@ -228,11 +194,11 @@ Example board file extract:
 	service {
 		service_default_mode: service_default {
 			service_default_mux {
-				ste,function = "service";
-				ste,pins = "service_d_1";
+				function = "service";
+				groups = "service_d_1";
 			};
 			service_default_cfg {
-				ste,pins = "GPIO44";
+				pins = "GPIO44";
 				bias-disable;
 			};
 		};
@@ -240,13 +206,13 @@ Example board file extract:
 	pwrctrl0 {
 		pwrctrl0_default_mux: pwrctrl0_mux {
 			pwrctrl0_default_mux {
-				ste,function = "pwrctrl";
-				ste,pins = "pwrctrl0_d_1";
+				function = "pwrctrl";
+				groups = "pwrctrl0_d_1";
 			};
 		};
 		pwrctrl0_default_mode: pwrctrl0_default {
 			pwrctrl0_default_cfg {
-				ste,pins = "GPIO45";
+				pins = "GPIO45";
 				bias-disable;
 			};
 		};
@@ -254,13 +220,13 @@ Example board file extract:
 	pwrctrl1 {
 		pwrctrl1_default_mux: pwrctrl1_mux {
 			pwrctrl1_default_mux {
-				ste,function = "pwrctrl";
-				ste,pins = "pwrctrl1_d_1";
+				function = "pwrctrl";
+				groups = "pwrctrl1_d_1";
 			};
 		};
 		pwrctrl1_default_mode: pwrctrl1_default {
 			pwrctrl1_default_cfg {
-				ste,pins = "GPIO46";
+				pins = "GPIO46";
 				bias-disable;
 			};
 		};
@@ -268,11 +234,11 @@ Example board file extract:
 	pwmextvibra1 {
 		pwmextvibra1_default_mode: pwmextvibra1_default {
 			pwmextvibra1_default_mux {
-				ste,function = "pwmextvibra";
-				ste,pins = "pwmextvibra1_d_1";
+				function = "pwmextvibra";
+				groups = "pwmextvibra1_d_1";
 			};
 			pwmextvibra1_default_cfg {
-				ste,pins = "GPIO47";
+				pins = "GPIO47";
 				bias-disable;
 			};
 		};
@@ -280,11 +246,11 @@ Example board file extract:
 	pwmextvibra2 {
 		pwmextvibra2_default_mode: pwmextvibra2_default {
 			pwmextvibra2_default_mux {
-				ste,function = "pwmextvibra";
-				ste,pins = "pwmextvibra2_d_1";
+				function = "pwmextvibra";
+				groups = "pwmextvibra2_d_1";
 			};
 			pwmextvibra1_default_cfg {
-				ste,pins = "GPIO48";
+				pins = "GPIO48";
 				bias-disable;
 			};
 		};
@@ -292,11 +258,11 @@ Example board file extract:
 	gpio51 {
 		gpio51_default_mode: gpio51_default {
 				gpio51_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio51_a_1";
+				function = "gpio";
+				groups = "gpio51_a_1";
 			};
 			gpio51_default_cfg {
-				ste,pins = "GPIO51";
+				pins = "GPIO51";
 				output-low;
 			};
 		};
@@ -304,11 +270,11 @@ Example board file extract:
 	gpio52 {
 		gpio52_default_mode: gpio52_default {
 			gpio52_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio52_a_1";
+				function = "gpio";
+				groups = "gpio52_a_1";
 			};
 			gpio52_default_cfg {
-				ste,pins = "GPIO52";
+				pins = "GPIO52";
 				bias-pull-down;
 			};
 		};
@@ -316,11 +282,11 @@ Example board file extract:
 	gpio53 {
 		gpio53_default_mode: gpio53_default {
 			gpio53_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio53_a_1";
+				function = "gpio";
+				groups = "gpio53_a_1";
 			};
 			gpio53_default_cfg {
-				ste,pins = "GPIO53";
+				pins = "GPIO53";
 				bias-pull-down;
 			};
 		};
@@ -328,11 +294,11 @@ Example board file extract:
 	gpio54 {
 		gpio54_default_mode: gpio54_default {
 			gpio54_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio54_a_1";
+				function = "gpio";
+				groups = "gpio54_a_1";
 			};
 			gpio54_default_cfg {
-				ste,pins = "GPIO54";
+				pins = "GPIO54";
 				output-low;
 			};
 		};
@@ -340,11 +306,11 @@ Example board file extract:
 	pdmclkdat {
 		pdmclkdat_default_mode: pdmclkdat_default {
 			pdmclkdat_default_mux {
-				ste,function = "pdm";
-				ste,pins = "pdmclkdat_d_1";
+				function = "pdm";
+				groups = "pdmclkdat_d_1";
 			};
 			pdmclkdat_default_cfg {
-				ste,pins = "GPIO55", "GPIO56";
+				pins = "GPIO55", "GPIO56";
 				bias-disable;
 			};
 		};