Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The interrupt subsystem delivers this time:

   - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support

   - Initial GIC-V4 support

   - Consolidation of the FSL MSI support

   - Utilize the effective affinity interface in various ARM irqchip
     drivers

   - Yet another interrupt chip driver (UniPhier AIDET)

   - Bulk conversion of the irq chip driver to use %pOF

   - The usual small fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  irqchip/ls-scfg-msi: Add MSI affinity support
  irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
  irqchip/ls-scfg-msi: Add LS1046a MSI support
  arm64: dts: ls1046a: Add MSI dts node
  arm64: dts: ls1043a: Share all MSIs
  arm: dts: ls1021a: Share all MSIs
  arm64: dts: ls1043a: Fix typo of MSI compatible string
  arm: dts: ls1021a: Fix typo of MSI compatible string
  irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
  irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
  irqchip/mmp: Make mmp_intc_conf const
  irqchip/gic: Make irq_chip const
  irqchip/gic-v3: Advertise GICv4 support to KVM
  irqchip/gic-v4: Enable low-level GICv4 operations
  irqchip/gic-v4: Add some basic documentation
  irqchip/gic-v4: Add VLPI configuration interface
  irqchip/gic-v4: Add VPE command interface
  irqchip/gic-v4: Add per-VM VPE domain creation
  irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
  irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
  ...

2 files changed, 37 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
index 9e389493203f..49ccabbfa6f3 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -4,8 +4,10 @@ Required properties:
 
 - compatible: should be "fsl,<soc-name>-msi" to identify
 	      Layerscape PCIe MSI controller block such as:
-              "fsl,1s1021a-msi"
-              "fsl,1s1043a-msi"
+              "fsl,ls1021a-msi"
+              "fsl,ls1043a-msi"
+              "fsl,ls1046a-msi"
+              "fsl,ls1043a-v1.1-msi"
 - msi-controller: indicates that this is a PCIe MSI controller node
 - reg: physical base address of the controller and length of memory mapped.
 - interrupts: an interrupt to the parent interrupt controller.
@@ -23,7 +25,7 @@ MSI controller node
 Examples:
 
 	msi1: msi-controller@1571000 {
-		compatible = "fsl,1s1043a-msi";
+		compatible = "fsl,ls1043a-msi";
 		reg = <0x0 0x1571000 0x0 0x8>,
 		msi-controller;
 		interrupts = <0 116 0x4>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
new file mode 100644
index 000000000000..48e71d3ac2ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt
@@ -0,0 +1,32 @@
+UniPhier AIDET
+
+UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic
+Interrupt Controller).  GIC itself can handle only high level and rising edge
+interrupts.  The AIDET provides logic inverter to support low level and falling
+edge interrupts.
+
+Required properties:
+- compatible: Should be one of the following:
+    "socionext,uniphier-ld4-aidet"  - for LD4 SoC
+    "socionext,uniphier-pro4-aidet" - for Pro4 SoC
+    "socionext,uniphier-sld8-aidet" - for sLD8 SoC
+    "socionext,uniphier-pro5-aidet" - for Pro5 SoC
+    "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-aidet" - for LD11 SoC
+    "socionext,uniphier-ld20-aidet" - for LD20 SoC
+    "socionext,uniphier-pxs3-aidet" - for PXs3 SoC
+- reg: Specifies offset and length of the register set for the device.
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an interrupt
+  source.  The value should be 2.  The first cell defines the interrupt number
+  (corresponds to the SPI interrupt number of GIC).  The second cell specifies
+  the trigger type as defined in interrupts.txt in this directory.
+
+Example:
+
+	aidet: aidet@5fc20000 {
+		compatible = "socionext,uniphier-pro4-aidet";
+		reg = <0x5fc20000 0x200>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};