Merge tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This time with bigger changes than usual:

   - A new IOMMU driver for the ARM SMMUv3.

     This IOMMU is pretty different from SMMUv1 and v2 in that it is
     configured through in-memory structures and not through the MMIO
     register region.  The ARM SMMUv3 also supports IO demand paging for
     PCI devices with PRI/PASID capabilities, but this is not
     implemented in the driver yet.

   - Lots of cleanups and device-tree support for the Exynos IOMMU
     driver.  This is part of the effort to bring Exynos DRM support
     upstream.

   - Introduction of default domains into the IOMMU core code.

     The rationale behind this is to move functionalily out of the IOMMU
     drivers to common code to get to a unified behavior between
     different drivers.  The patches here introduce a default domain for
     iommu-groups (isolation groups).

     A device will now always be attached to a domain, either the
     default domain or another domain handled by the device driver.  The
     IOMMU drivers have to be modified to make use of that feature.  So
     long the AMD IOMMU driver is converted, with others to follow.

   - Patches for the Intel VT-d drvier to fix DMAR faults that happen
     when a kdump kernel boots.

     When the kdump kernel boots it re-initializes the IOMMU hardware,
     which destroys all mappings from the crashed kernel.  As this
     happens before the endpoint devices are re-initialized, any
     in-flight DMA causes a DMAR fault.  These faults cause PCI master
     aborts, which some devices can't handle properly and go into an
     undefined state, so that the device driver in the kdump kernel
     fails to initialize them and the dump fails.

     This is now fixed by copying over the mapping structures (only
     context tables and interrupt remapping tables) from the old kernel
     and keep the old mappings in place until the device driver of the
     new kernel takes over.  This emulates the the behavior without an
     IOMMU to the best degree possible.

   - A couple of other small fixes and cleanups"

* tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits)
  iommu/amd: Handle large pages correctly in free_pagetable
  iommu/vt-d: Don't disable IR when it was previously enabled
  iommu/vt-d: Make sure copied over IR entries are not reused
  iommu/vt-d: Copy IR table from old kernel when in kdump mode
  iommu/vt-d: Set IRTA in intel_setup_irq_remapping
  iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping
  iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping
  iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping
  iommu/vt-d: Enable Translation only if it was previously disabled
  iommu/vt-d: Don't disable translation prior to OS handover
  iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed
  iommu/vt-d: Don't do early domain assignment if kdump kernel
  iommu/vt-d: Allocate si_domain in init_dmars()
  iommu/vt-d: Mark copied context entries
  iommu/vt-d: Do not re-use domain-ids from the old kernel
  iommu/vt-d: Copy translation tables from old kernel
  iommu/vt-d: Detect pre enabled translation
  iommu/vt-d: Make root entry visible for hardware right after allocation
  iommu/vt-d: Init QI before root entry is allocated
  iommu/vt-d: Cleanup log messages
  ...

1 files changed, 37 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
new file mode 100644
index 000000000000..c03eec116872
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
@@ -0,0 +1,37 @@
+* ARM SMMUv3 Architecture Implementation
+
+The SMMUv3 architecture is a significant deparature from previous
+revisions, replacing the MMIO register interface with in-memory command
+and event queues and adding support for the ATS and PRI components of
+the PCIe specification.
+
+** SMMUv3 required properties:
+
+- compatible        : Should include:
+
+                      * "arm,smmu-v3" for any SMMUv3 compliant
+                        implementation. This entry should be last in the
+                        compatible list.
+
+- reg               : Base address and size of the SMMU.
+
+- interrupts        : Non-secure interrupt list describing the wired
+                      interrupt sources corresponding to entries in
+                      interrupt-names. If no wired interrupts are
+                      present then this property may be omitted.
+
+- interrupt-names   : When the interrupts property is present, should
+                      include the following:
+                      * "eventq"    - Event Queue not empty
+                      * "priq"      - PRI Queue not empty
+                      * "cmdq-sync" - CMD_SYNC complete
+                      * "gerror"    - Global Error activated
+
+** SMMUv3 optional properties:
+
+- dma-coherent      : Present if DMA operations made by the SMMU (page
+                      table walks, stream table accesses etc) are cache
+                      coherent with the CPU.
+
+                      NOTE: this only applies to the SMMU itself, not
+                      masters connected upstream of the SMMU.