Merge tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

FPGA Manager changes for 5.9-rc1

Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge
window.

DFL:
- Xu's changes add support for AFU interrupt handling and puts them to
  use for error handling.
- Xu's other change also adds another device-id for the Intel FPGA PAC N3000.
- John's change converts from using get_user_pages() to
  pin_user_pages().
- Gustavo's patch cleans up some of the allocation by using
  struct_size().

Xilinx:
- Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers
  and updates the comments and dt-bindings to reflect the fact it also
  supports 7 series devices.

Core:
- Tom cleaned up the fpga-bridge / fpga-mgr core by removing some
  dead-stores.

All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.

Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: pci: add device id for Intel FPGA PAC N3000
  Documentation: fpga: dfl: add descriptions for interrupt related interfaces.
  fpga: dfl: afu: add AFU interrupt support
  fpga: dfl: fme: add interrupt support for global error reporting
  fpga: dfl: afu: add interrupt support for port error reporting
  fpga: dfl: introduce interrupt trigger setting API
  fpga: dfl: pci: add irq info for feature devices enumeration
  fpga: dfl: parse interrupt info for feature devices on enumeration
  fpga manager: xilinx-spi: check INIT_B pin during write_init
  dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO
  fpga: Fix dead store in fpga-bridge.c
  fpga: Fix dead store fpga-mgr.c
  fpga: dfl: Use struct_size() in kzalloc()
  fpga manager: xilinx-spi: remove unneeded, mistyped variables
  fpga manager: xilinx-spi: valid for the 7 Series too
  dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too
  fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()

1 files changed, 12 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
index cfa4ed42b62f..5ef659c1394d 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
@@ -1,11 +1,14 @@
 Xilinx Slave Serial SPI FPGA Manager
 
-Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
-what is referred to as "slave serial" interface.
+Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
+bitstream over what is referred to as "slave serial" interface.
 The slave serial link is not technically SPI, and might require extra
 circuits in order to play nicely with other SPI slaves on the same bus.
 
-See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+See:
+- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
 
 Required properties:
 - compatible: should contain "xlnx,fpga-slave-serial"
@@ -13,6 +16,10 @@ Required properties:
 - prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
 - done-gpios: config status pin (referred to as DONE in the manual)
 
+Optional properties:
+- init-b-gpios: initialization status and configuration error pin
+                (referred to as INIT_B in the manual)
+
 Example for full FPGA configuration:
 
 	fpga-region0 {
@@ -37,7 +44,8 @@ Example for full FPGA configuration:
 			spi-max-frequency = <60000000>;
 			spi-cpha;
 			reg = <0>;
-			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 			prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+			init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		};
 	};