summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-01-27 21:30:42 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-01-27 21:30:42 +0300
commit9e1af7567b266dc6c3c8fd434ea807b3206bfdc1 (patch)
treee974d528b749466203dfdd4915826300ffb88954 /Documentation/devicetree/bindings
parentb9b627a449889e9dacfe9e7ac3cdf829a0004845 (diff)
parent533a6cfe08f96a7b5c65e06d20916d552c11b256 (diff)
downloadlinux-9e1af7567b266dc6c3c8fd434ea807b3206bfdc1.tar.xz
Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "There are no updates for the MEMSTICK subsystem this time. But note that I am also carrying a patch from the pinctrl tree, which has been shared through an immutable branch. Summary: MMC core: - Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC - Respect f_max clock rate at card initialization - Add gpiod_toggle_active_low() API - Consolidate slot-gpio code by using gpiod_toggle_active_low() MMC host: - Add pinctrl_select_default_state() API - Consolidate pintctrl code by using pinctrl_select_default_state() - mmci: Support any block sizes for SDIO for some variants - mmci: Enable reset control for stm32_sdmmc - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it - renesas_sdhi: Add support for the r8a77961 variant - renesas_sdhi: A few minor improvements - rockchip-dw-mshc: Add support for the rk3308 variant - sdhci: Enable support for external DMA controllers - sdhci: Fixup error path when sending CMD12 - sdhci-brcmstb: Add support for 7216b0 variant - sdhci-brcmstb: Add support for command queuing (CQHCI) - sdhci-brcmstb: Add support for eMMC HS400ES mode - sdhci-msm: Add support for the sc7180 variant - sdhci-msm: Add support for command queuing (CQHCI) - sdhci-of-at91: Add support for the SAM9x60 variant - sdhci-of-at91: Improve support for tunings - sdhci-of-esdhc: A few fixups for some clock related issues - sdhci-omap: Add support for the am335x and the am437x variants - sdhci-omap: Improve support for erase operations - sdhci-omap: Add support for external DMA" * tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits) mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC mmc: sdhci-cadence: remove unneeded 'inline' marker dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308 dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml mmc: sdhci-msm: Add CQHCI support for sdhci-msm mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size mmc: sdhci-of-esdhc: fix serious issue clock is always disabled mmc: sdhci-of-esdhc: fix transfer mode register reading mmc: sdhci-brcmstb: Fix incorrect switch to HS mode mmc: sdhci-brcmstb: Add support for Command Queuing (CQE) mmc: sdhci-brcmstb: Add shutdown callback mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0 mmc: core: limit probe clock frequency to configured f_max mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message mmc: sdhci: fix an issue of mixing different types ...
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt41
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/renesas,sdhi.txt3
-rw-r--r--Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt49
-rw-r--r--Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml125
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-atmel.txt13
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-msm.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-omap.txt11
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml68
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt141
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml70
11 files changed, 316 insertions, 207 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
index 733b64a4d8eb..ae2074184528 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -11,28 +11,43 @@ Required properties:
- compatible: should be one of the following
- "brcm,bcm7425-sdhci"
- "brcm,bcm7445-sdhci"
+ - "brcm,bcm7216-sdhci"
Refer to clocks/clock-bindings.txt for generic clock consumer properties.
Example:
- sdhci@f03e0100 {
- compatible = "brcm,bcm7425-sdhci";
- reg = <0xf03e0000 0x100>;
- interrupts = <0x0 0x26 0x0>;
- sdhci,auto-cmd12;
- clocks = <&sw_sdio>;
+ sdhci@84b0000 {
sd-uhs-sdr50;
sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ sdhci,auto-cmd12;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b0000 0x260 0x84b0300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x26 0x4>;
+ interrupt-names = "sdio0_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
};
- sdhci@f03e0300 {
+ sdhci@84b1000 {
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ supports-cqe;
non-removable;
bus-width = <0x8>;
- compatible = "brcm,bcm7425-sdhci";
- reg = <0xf03e0200 0x100>;
- interrupts = <0x0 0x27 0x0>;
- sdhci,auto-cmd12;
- clocks = <sw_sdio>;
- mmc-hs200-1_8v;
+ compatible = "brcm,bcm7216-sdhci",
+ "brcm,bcm7445-sdhci",
+ "brcm,sdhci-brcmstb";
+ reg = <0x84b1000 0x260 0x84b1300 0x200>;
+ reg-names = "host", "cfg";
+ interrupts = <0x0 0x27 0x4>;
+ interrupt-names = "sdio1_0";
+ clocks = <&scmi_clk 245>;
+ clock-names = "sw_sdio";
};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 2fb466ca2a9d..c93643fceabb 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -21,6 +21,7 @@ Required properties:
"fsl,imx8mq-usdhc"
"fsl,imx8mm-usdhc"
"fsl,imx8mn-usdhc"
+ "fsl,imx8mp-usdhc"
"fsl,imx8qxp-usdhc"
Optional properties:
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt
index bc08fc43a9be..e6cc47844207 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt
@@ -23,7 +23,8 @@ Required properties:
"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
- "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
+ "renesas,sdhi-r8a7796" - SDHI IP on R8A77960 SoC
+ "renesas,sdhi-r8a77961" - SDHI IP on R8A77961 SoC
"renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC
"renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC
"renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
deleted file mode 100644
index 6f629b12bd69..000000000000
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Rockchip specific extensions to the Synopsys Designware Mobile
- Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Rockchip specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
- - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
- before RK3288
- - "rockchip,rk3288-dw-mshc": for Rockchip RK3288
- - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
- - "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip PX30
- - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
- - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x
- - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328
- - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
- - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
-
-Optional Properties:
-* clocks: from common clock binding: if ciu-drive and ciu-sample are
- specified in clock-names, should contain handles to these clocks.
-
-* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt
- two more clocks "ciu-drive" and "ciu-sample" are supported. They are used
- to control the clock phases, "ciu-sample" is required for tuning high-
- speed modes.
-
-* rockchip,default-sample-phase: The default phase to set ciu-sample at
- probing, low speeds or in case where all phases work at tuning time.
- If not specified 0 deg will be used.
-
-* rockchip,desired-num-phases: The desired number of times that the host
- execute tuning when needed. If not specified, the host will do tuning
- for 360 times, namely tuning for each degree.
-
-Example:
-
- rkdwmmc0@12200000 {
- compatible = "rockchip,rk3288-dw-mshc";
- reg = <0x12200000 0x1000>;
- interrupts = <0 75 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
new file mode 100644
index 000000000000..89c3edd6a728
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip designware mobile storage host controller device tree bindings
+
+description:
+ Rockchip uses the Synopsys designware mobile storage host controller
+ to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+ This file documents the combined properties for the core Synopsys dw mshc
+ controller that are not already included in the synopsys-dw-mshc-common.yaml
+ file and the Rockchip specific extensions.
+
+allOf:
+ - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ oneOf:
+ # for Rockchip RK2928 and before RK3288
+ - const: rockchip,rk2928-dw-mshc
+ # for Rockchip RK3288
+ - const: rockchip,rk3288-dw-mshc
+ - items:
+ - enum:
+ # for Rockchip PX30
+ - rockchip,px30-dw-mshc
+ # for Rockchip RK3036
+ - rockchip,rk3036-dw-mshc
+ # for Rockchip RK322x
+ - rockchip,rk3228-dw-mshc
+ # for Rockchip RK3308
+ - rockchip,rk3308-dw-mshc
+ # for Rockchip RK3328
+ - rockchip,rk3328-dw-mshc
+ # for Rockchip RK3368
+ - rockchip,rk3368-dw-mshc
+ # for Rockchip RK3399
+ - rockchip,rk3399-dw-mshc
+ # for Rockchip RV1108
+ - rockchip,rv1108-dw-mshc
+ - const: rockchip,rk3288-dw-mshc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+ description:
+ Handle to "biu" and "ciu" clocks for the bus interface unit clock and
+ the card interface unit clock. If "ciu-drive" and "ciu-sample" are
+ specified in clock-names, it should also contain
+ handles to these clocks.
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: biu
+ - const: ciu
+ - const: ciu-drive
+ - const: ciu-sample
+ description:
+ Apart from the clock-names "biu" and "ciu" two more clocks
+ "ciu-drive" and "ciu-sample" are supported. They are used
+ to control the clock phases, "ciu-sample" is required for tuning
+ high speed modes.
+
+ rockchip,default-sample-phase:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 360
+ default: 0
+ description:
+ The default phase to set "ciu-sample" at probing,
+ low speeds or in case where all phases work at tuning time.
+ If not specified 0 deg will be used.
+
+ rockchip,desired-num-phases:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 360
+ default: 360
+ description:
+ The desired number of times that the host execute tuning when needed.
+ If not specified, the host will do tuning for 360 times,
+ namely tuning for each degree.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ sdmmc: mmc@ff0c0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff0c0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
index 503c6dbac1b2..69edfd4d3922 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
@@ -5,11 +5,16 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
sdhci-of-at91 driver.
Required properties:
-- compatible: Must be "atmel,sama5d2-sdhci".
+- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci".
- clocks: Phandlers to the clocks.
-- clock-names: Must be "hclock", "multclk", "baseclk";
+- clock-names: Must be "hclock", "multclk", "baseclk" for
+ "atmel,sama5d2-sdhci".
+ Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
Optional properties:
+- assigned-clocks: The same with "multclk".
+- assigned-clock-rates The rate of "multclk" in order to not rely on the
+ gck configuration set by previous components.
- microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
inverted. The default polarity for this signal is described in the datasheet.
For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
@@ -17,10 +22,12 @@ Optional properties:
Example:
-sdmmc0: sdio-host@a0000000 {
+mmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
clock-names = "hclock", "multclk", "baseclk";
+ assigned-clocks = <&sdmmc0_gclk>;
+ assigned-clock-rates = <480000000>;
};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index da4edb146a98..7ee639b1af03 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -19,6 +19,7 @@ Required properties:
"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
+ "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
NOTE that some old device tree files may be floating around that only
have the string "qcom,sdhci-msm-v4" without the SoC compatible string
but doing that should be considered a deprecated practice.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
index 72c4dec7e1db..aeb615ef672a 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
@@ -7,6 +7,8 @@ For UHS devices which require tuning, the device tree should have a "cpu_thermal
Required properties:
- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
Should be "ti,k2g-sdhci" for K2G
+ Should be "ti,am335-sdhci" for am335x controllers
+ Should be "ti,am437-sdhci" for am437x controllers
- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
(Not required for K2G).
- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
@@ -15,6 +17,13 @@ Required properties:
"hs200_1_8v",
- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+Optional properties:
+- dmas: List of DMA specifiers with the controller specific format as described
+ in the generic DMA client binding. A tx and rx specifier is required.
+- dma-names: List of DMA request names. These strings correspond 1:1 with the
+ DMA specifiers listed in dmas. The string naming is to be "tx"
+ and "rx" for TX and RX DMA requests, respectively.
+
Example:
mmc1: mmc@4809c000 {
compatible = "ti,dra7-sdhci";
@@ -22,4 +31,6 @@ Example:
ti,hwmods = "mmc1";
bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 000000000000..890d47a87ac5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+ - $ref: "mmc-controller.yaml#"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: reset
+
+ clock-frequency:
+ description:
+ Should be the frequency (in Hz) of the ciu clock. If this
+ is specified and the ciu clock is specified then we'll try to set the ciu
+ clock to this at probe time.
+
+ fifo-depth:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The maximum size of the tx/rx fifo's. If this property is not
+ specified, the default value of the fifo size is determined from the
+ controller registers.
+
+ card-detect-delay:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 0
+ description:
+ Delay in milli-seconds before detecting card after card
+ insert event. The default value is 0.
+
+ data-addr:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Override fifo address with value provided by DT. The default FIFO reg
+ offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+ by driver. If the controller does not follow this rule, please use
+ this property to set fifo address in device tree.
+
+ fifo-watermark-aligned:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data done irq is expected if data length is less than
+ watermark in PIO mode. But fifo watermark is requested to be aligned
+ with data length in some SoC so that TX/RX irq can be generated with
+ data done irq. Add this watermark quirk to mark this requirement and
+ force fifo watermark setting accordingly.
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
deleted file mode 100644
index 7e5e427a22ce..000000000000
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Synopsys Designware Mobile Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
- - snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
-* #address-cells: should be 1.
-* #size-cells: should be 0.
-
-# Slots (DEPRECATED): The slot specific information are contained within
- child-nodes with each child-node representing a supported slot. There should
- be atleast one child node representing a card slot. The name of the child node
- representing the slot is recommended to be slot@n where n is the unique number
- of the slot connected to the controller. The following are optional properties
- which can be included in the slot child node.
-
- * reg: specifies the physical slot number. The valid values of this
- property is 0 to (num-slots -1), where num-slots is the value
- specified by the num-slots property.
-
- * bus-width: as documented in mmc core bindings.
-
- * wp-gpios: specifies the write protect gpio line. The format of the
- gpio specifier depends on the gpio controller. If a GPIO is not used
- for write-protect, this property is optional.
-
- * disable-wp: If the wp-gpios property isn't present then (by default)
- we'd assume that the write protect is hooked up directly to the
- controller's special purpose write protect line (accessible via
- the WRTPRT register). However, it's possible that we simply don't
- want write protect. In that case specify 'disable-wp'.
- NOTE: This property is not required for slots known to always
- connect to eMMC or SDIO cards.
-
-Optional properties:
-
-* resets: phandle + reset specifier pair, intended to represent hardware
- reset signal present internally in some host controller IC designs.
- See Documentation/devicetree/bindings/reset/reset.txt for details.
-
-* reset-names: request name for using "resets" property. Must be "reset".
- (It will be used together with "resets" property.)
-
-* clocks: from common clock binding: handle to biu and ciu clocks for the
- bus interface unit clock and the card interface unit clock.
-
-* clock-names: from common clock binding: Shall be "biu" and "ciu".
- If the biu clock is missing we'll simply skip enabling it. If the
- ciu clock is missing we'll just assume that the clock is running at
- clock-frequency. It is an error to omit both the ciu clock and the
- clock-frequency.
-
-* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this
- is specified and the ciu clock is specified then we'll try to set the ciu
- clock to this at probe time.
-
-* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
- specified, the default value of the fifo size is determined from the
- controller registers.
-
-* card-detect-delay: Delay in milli-seconds before detecting card after card
- insert event. The default value is 0.
-
-* data-addr: Override fifo address with value provided by DT. The default FIFO reg
- offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by
- driver. If the controller does not follow this rule, please use this property
- to set fifo address in device tree.
-
-* fifo-watermark-aligned: Data done irq is expected if data length is less than
- watermark in PIO mode. But fifo watermark is requested to be aligned with data
- length in some SoC so that TX/RX irq can be generated with data done irq. Add this
- watermark quirk to mark this requirement and force fifo watermark setting
- accordingly.
-
-* vmmc-supply: The phandle to the regulator to use for vmmc. If this is
- specified we'll defer probe until we can find this regulator.
-
-* dmas: List of DMA specifiers with the controller specific format as described
- in the generic DMA client binding. Refer to dma.txt for details.
-
-* dma-names: request names for generic DMA client binding. Must be "rx-tx".
- Refer to dma.txt for details.
-
-Aliases:
-
-- All the MSHC controller nodes should be represented in the aliases node using
- the following format 'mshc{n}' where n is a unique number for the alias.
-
-Example:
-
-The MSHC controller node can be split into two portions, SoC specific and
-board specific portions as listed below.
-
- dwmmc0@12200000 {
- compatible = "snps,dw-mshc";
- clocks = <&clock 351>, <&clock 132>;
- clock-names = "biu", "ciu";
- reg = <0x12200000 0x1000>;
- interrupts = <0 75 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- data-addr = <0x200>;
- fifo-watermark-aligned;
- resets = <&rst 20>;
- reset-names = "reset";
- };
-
-[board specific internal DMA resources]
-
- dwmmc0@12200000 {
- clock-frequency = <400000000>;
- clock-freq-min-max = <400000 200000000>;
- broken-cd;
- fifo-depth = <0x80>;
- card-detect-delay = <200>;
- vmmc-supply = <&buck8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- };
-
-[board specific generic DMA request binding]
-
- dwmmc0@12200000 {
- clock-frequency = <400000000>;
- clock-freq-min-max = <400000 200000000>;
- broken-cd;
- fifo-depth = <0x80>;
- card-detect-delay = <200>;
- vmmc-supply = <&buck8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- dmas = <&pdma 12>;
- dma-names = "rx-tx";
- };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
new file mode 100644
index 000000000000..05f9f36dcb75
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Binding
+
+allOf:
+ - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ const: snps,dw-mshc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+ description:
+ Handle to "biu" and "ciu" clocks for the
+ bus interface unit clock and the card interface unit clock.
+
+ clock-names:
+ items:
+ - const: biu
+ - const: ciu
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ mmc@12200000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ clocks = <&clock 351>, <&clock 132>;
+ clock-names = "biu", "ciu";
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ resets = <&rst 20>;
+ reset-names = "reset";
+ vmmc-supply = <&buck8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ clock-freq-min-max = <400000 200000000>;
+ clock-frequency = <400000000>;
+ data-addr = <0x200>;
+ fifo-depth = <0x80>;
+ fifo-watermark-aligned;
+ };