Merge tag 'leds-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds

Pull LED updates from Pavel Machek:

 - New driver for TI TPS6105X

 - Add managed API to get a LED from a device driver

 - Misc fixes and updates

* tag 'leds-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (22 commits)
  leds: lm3692x: Disable chip on brightness 0
  leds: lm3692x: Split out lm3692x_leds_disable
  leds: lm3692x: Move lm3692x_init and rename to lm3692x_leds_enable
  leds: lm3692x: Make sure we don't exceed the maximum LED current
  dt: bindings: lm3692x: Add led-max-microamp property
  leds: lm3692x: Allow to configure over voltage protection
  dt: bindings: lm3692x: Add ti,ovp-microvolt property
  leds: populate the device's of_node
  leds: Add managed API to get a LED from a device driver
  leds: Add of_led_get() and led_put()
  leds: lm3532: add pointer to documentation and fix typo
  leds: lm3532: use extended registration so that LED can be used for backlight
  leds: lm3642: remove warnings for bad strtol, cleanup gotos
  leds: rb532: cleanup whitespace
  ledtrig-pattern: fix email address quoting in MODULE_AUTHOR()
  dt-bindings: mfd: update TI tps6105x chip bindings
  leds: tps6105x: add driver for MFD chip LED mode
  led: max77650: add of_match table
  leds: bd2802: Convert to use GPIO descriptors
  leds: pca963x: Fix open-drain initialization
  ...

2 files changed, 54 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
index 4c2d923f8758..501468aa4d38 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -18,6 +18,10 @@ Required properties:
 Optional properties:
 	- enable-gpios : gpio pin to enable/disable the device.
 	- vled-supply : LED supply
+	- ti,ovp-microvolt: Overvoltage protection in
+	    micro-volt, can be 17000000, 21000000, 25000000 or
+	    29000000. If ti,ovp-microvolt is not specified it
+	    defaults to 29000000.
 
 Required child properties:
 	- reg : 0 - Will enable all LED sync paths
@@ -31,6 +35,8 @@ Optional child properties:
 	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
 	- linux,default-trigger :
 	   see Documentation/devicetree/bindings/leds/common.txt
+	- led-max-microamp :
+	   see Documentation/devicetree/bindings/leds/common.txt
 
 Example:
 
@@ -44,12 +50,14 @@ led-controller@36 {
 
 	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	vled-supply = <&vbatt>;
+	ti,ovp-microvolt = <29000000>;
 
 	led@0 {
 		reg = <0>;
 		function = LED_FUNCTION_BACKLIGHT;
 		color = <LED_COLOR_ID_WHITE>;
 		linux,default-trigger = "backlight";
+		led-max-microamp = <20000>;
 	};
 }
 
diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt
index 93602c7a19c8..dc448a9d5b4d 100644
--- a/Documentation/devicetree/bindings/mfd/tps6105x.txt
+++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt
@@ -7,11 +7,56 @@ Required properties:
 - compatible:		"ti,tps61050" or "ti,tps61052"
 - reg:			Specifies the I2C slave address
 
-Example:
+Optional sub-node:
+
+This subnode selects the chip's operational mode.
+There can be at most one single available subnode.
+
+- regulator: presence of this sub-node puts the chip in regulator mode.
+	see ../regulator/regulator.yaml
+
+- led: presence of this sub-node puts the chip in led mode.
+	Optional properties:
+	- function : see ../leds/common.txt
+	- color    : see ../leds/common.txt
+	- label    : see ../leds/common.txt
+			(deprecated)
+
+Example (GPIO operation only):
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+	};
+};
+
+Example (GPIO + regulator operation):
 
 i2c0 {
 	tps61052@33 {
 		compatible = "ti,tps61052";
 		reg = <0x33>;
+
+		regulator {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+Example (GPIO + led operation):
+
+#include <dt-bindings/leds/common.h>
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+		};
 	};
 };