Merge tag 'v3.17' into next

Synchronize with mainline to bring in changes to Synaptics and i8042
drivers.

10 files changed, 42 insertions, 15 deletions

diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
index 9f1d750d76de..61bca509d7b9 100644
--- a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
+++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt
@@ -16,9 +16,9 @@ Example:
 * DMA client
 
 Required properties:
-- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
-		where SRS/DRS values are fixed handles, specified in the SoC
-		manual as the value that would be written into the PDMACHCR.
+- dmas:		a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs.
+		where SRS/DRS are specified in the SoC manual.
+		It will be written into PDMACHCR as high 16-bit parts.
 - dma-names:	a list of DMA channel names, one per "dmas" entry
 
 Example:
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index baef432e8369..1852906517ab 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -11,10 +11,17 @@ Required properties:
 
 Optional properties for main touchpad device:
 
-- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
-    keycode generated by each GPIO. Linux keycodes are defined in
+- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
+    on GPIO bit changes. An array of up to 8 entries can be provided
+    indicating the Linux keycode mapped to each bit of the status byte,
+    starting at the LSB. Linux keycodes are defined in
     <dt-bindings/input/input.h>.
 
+    Note: the numbering of the GPIOs and the bit they start at varies between
+    maXTouch devices. You must either refer to the documentation, or
+    experiment to determine which bit corresponds to which input. Use
+    KEY_RESERVED for unused padding values.
+
 Example:
 
 	touch@4b {
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 9b03c57563a4..e45ac3f926b1 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -39,6 +39,10 @@ Optional properties:
   further clocks may be specified in derived bindings.
 - clock-names: One name for each entry in the clocks property, the
   first one should be "stmmaceth".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
index 340980239ea9..ca69f5e3040c 100644
--- a/Documentation/devicetree/bindings/regulator/tps65090.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -45,8 +45,8 @@ Example:
 		infet5-supply = <&some_reg>;
 		infet6-supply = <&some_reg>;
 		infet7-supply = <&some_reg>;
-		vsys_l1-supply = <&some_reg>;
-		vsys_l2-supply = <&some_reg>;
+		vsys-l1-supply = <&some_reg>;
+		vsys-l2-supply = <&some_reg>;
 
 		regulators {
 			dcdc1 {
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
index 46f344965313..4eb7997674a0 100644
--- a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
+++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
@@ -1,7 +1,7 @@
 ADI AXI-SPDIF controller
 
 Required properties:
- - compatible : Must be "adi,axi-spdif-1.00.a"
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
  - reg : Must contain SPDIF core's registers location and length
  - clocks : Pairs of phandle and specifier referencing the controller's clocks.
    The controller expects two clocks, the clock used for the AXI interface and
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 6c55fcfe5e1d..9b82c20b306b 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -31,7 +31,7 @@ i2s@ff890000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "rx", "tx";
+	dma-names = "tx", "rx";
 	clock-names = "i2s_hclk", "i2s_clk";
 	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 };
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 7bab35575817..467dec441c62 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -16,11 +16,15 @@ Required Properties:
 - clocks: Must contain an entry for each entry in clock-names.
 - clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
 			   the peripheral clock.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional Properties:
+
 - dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
 		Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: DMA request names should include "tx" and "rx" if present.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
+
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
index 578a1fca366e..443bcb6134d5 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -56,6 +56,9 @@ Required properties:
  - fsl,data-width : should be <18> or <24>
  - port: A port node with endpoint definitions as defined in
    Documentation/devicetree/bindings/media/video-interfaces.txt.
+   On i.MX5, the internal two-input-multiplexer is used.
+   Due to hardware limitations, only one port (port@[0,1])
+   can be used for each channel (lvds-channel@[0,1], respectively)
    On i.MX6, there should be four ports (port@[0-3]) that correspond
    to the four LVDS multiplexer inputs.
 
@@ -78,6 +81,8 @@ ldb: ldb@53fa8008 {
 		      "di0", "di1";
 
 	lvds-channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0>;
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
@@ -86,7 +91,9 @@ ldb: ldb@53fa8008 {
 			/* ... */
 		};
 
-		port {
+		port@0 {
+			reg = <0>;
+
 			lvds0_in: endpoint {
 				remote-endpoint = <&ipu_di0_lvds0>;
 			};
@@ -94,6 +101,8 @@ ldb: ldb@53fa8008 {
 	};
 
 	lvds-channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <1>;
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
@@ -102,7 +111,9 @@ ldb: ldb@53fa8008 {
 			/* ... */
 		};
 
-		port {
+		port@1 {
+			reg = <1>;
+
 			lvds1_in: endpoint {
 				remote-endpoint = <&ipu_di1_lvds1>;
 			};
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
index cef181a9d8bd..96681c93b86d 100644
--- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -5,6 +5,7 @@ Required properties:
 	* "fsl,imx23-usbphy" for imx23 and imx28
 	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
 	* "fsl,imx6sl-usbphy" for imx6sl
+	* "fsl,imx6sx-usbphy" for imx6sx
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
diff --git a/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
index 0218fcdc1299..0c0970c210ab 100644
--- a/Documentation/devicetree/bindings/video/analog-tv-connector.txt
+++ b/Documentation/devicetree/bindings/video/analog-tv-connector.txt
@@ -2,7 +2,7 @@ Analog TV Connector
 ===================
 
 Required properties:
-- compatible: "composite-connector" or "svideo-connector"
+- compatible: "composite-video-connector" or "svideo-connector"
 
 Optional properties:
 - label: a symbolic name for the connector
@@ -14,7 +14,7 @@ Example
 -------
 
 tv: connector {
-	compatible = "composite-connector";
+	compatible = "composite-video-connector";
 	label = "tv";
 
 	port {