Merge tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next

Pull USB driver updates from Greg KH:
 "Here is the big USB driver pull request for 3.16-rc1.

  Nothing huge here, but lots of little things in the USB core, and in
  lots of drivers.  Hopefully the USB power management will be work
  better now that it has been reworked to do per-port power control
  dynamically.  There's also a raft of gadget driver updates and fixes,
  CONFIG_USB_DEBUG is finally gone now that everything has been
  converted over to the dynamic debug inteface, the last hold-out
  drivers were cleaned up and the config option removed.  There were
  also other minor things all through the drivers/usb/ tree, the
  shortlog shows this pretty well.

  All have been in linux-next, including the very last patch, which came
  from linux-next to fix a build issue on some platforms"

* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
  usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
  USB: orinoco_usb: remove CONFIG_USB_DEBUG support
  USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
  USB: media: streamzap: remove CONFIG_USB_DEBUG
  USB: media: redrat3: remove CONFIG_USB_DEBUG usage
  USB: media: redrat3: remove unneeded tracing macro
  usb: qcserial: add additional Sierra Wireless QMI devices
  usb: host: max3421-hcd: Use module_spi_driver
  usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
  usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
  usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
  usb: qcserial: add Netgear AirCard 341U
  Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
  usb: host: xhci-plat: add xhci_plat_start()
  usb: host: max3421-hcd: Fix potential NULL urb dereference
  Revert "usb: gadget: net2280: Add support for PLX USB338X"
  USB: usbip: remove CONFIG_USB_DEBUG reference
  USB: remove CONFIG_USB_DEBUG from defconfig files
  usb: resume child device when port is powered on
  usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
  ...

1 files changed, 14 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt
index 0c5118f7a916..e9445224fabd 100644
--- a/Documentation/devicetree/bindings/usb/gr-udc.txt
+++ b/Documentation/devicetree/bindings/usb/gr-udc.txt
@@ -12,17 +12,23 @@ Required properties:
 
 - reg : Address and length of the register set for the device
 
-- interrupts : Interrupt numbers for this device
+- interrupts : Interrupt numbers for this device. Either one interrupt number
+	for all interrupts, or one for status related interrupts, one for IN
+	endpoint related interrupts and one for OUT endpoint related interrupts.
 
 Optional properties:
 
-- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is
-	not present, or for endpoints outside of the array, 1024 is assumed by
-	the driver.
-
-- epibufsizes : An array of buffer sizes for IN endpoints. If the property is
-	not present, or for endpoints outside of the array, 1024 is assumed by
-	the driver.
+- epobufsizes : Array of buffer sizes for OUT endpoints when they differ
+	from the default size of 1024. The array is indexed by the OUT endpoint
+	number. If the property is present it typically contains one entry for
+	each OUT endpoint of the core. Fewer entries overrides the default sizes
+	only for as many endpoints as the array contains.
+
+- epibufsizes : Array of buffer sizes for IN endpoints when they differ
+	from the default size of 1024. The array is indexed by the IN endpoint
+	number. If the property is present it typically contains one entry for
+	each IN endpoint of the core. Fewer entries overrides the default sizes
+	only for as many endpoints as the array contains.
 
 For further information look in the documentation for the GLIB IP core library:
 http://www.gaisler.com/products/grlib/grip.pdf