Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "There are minor updates to SoC specific drivers for chips by Rockchip,
  Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.

  Noteworthy driver changes include:

   - Several conversions of DT bindings to yaml format.

   - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.

   - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
     and support for more chips in the RPMh power domains and the
     soc-id.

   - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.

   - Apple M1 gains support for the on-chip NVMe controller, making it
     possible to finally use the internal disks. This also includes SoC
     drivers for their RTKit IPC and for the SART DMA address filter.

  For other subsystems that merge their drivers through the SoC tree, we
  have

   - Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
     SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
     now has a cache for firmware argument structures as an
     optimization, and SCMI now supports the 3.1 version of the
     specification.

   - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
     drivers

   - Memory controller updates for Tegra, and a few updates for other
     platforms"

* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
  memory: tegra: Add MC error logging on Tegra186 onward
  memory: tegra: Add memory controller channels support
  memory: tegra: Add APE memory clients for Tegra234
  memory: tegra: Add Tegra234 support
  nvme-apple: fix sparse endianess warnings
  soc/tegra: pmc: Document core domain fields
  soc: qcom: pdr: use static for servreg_* variables
  soc: imx: fix semicolon.cocci warnings
  soc: renesas: R-Car V3U is R-Car Gen4
  soc: imx: add i.MX8MP HDMI blk-ctrl
  soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  soc: imx: imx8m-blk-ctrl: set power device name
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc/tegra: pmc: Select REGMAP
  dt-bindings: reset: st,sti-powerdown: Convert to yaml
  dt-bindings: reset: st,sti-picophyreset: Convert to yaml
  dt-bindings: reset: socfpga: Convert to yaml
  dt-bindings: reset: snps,axs10x-reset: Convert to yaml
  ...

22 files changed, 499 insertions, 295 deletions

diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
new file mode 100644
index 000000000000..4379cec6b35a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Reset Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@altera.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Cyclone5/Arria5/Arria10
+        const: altr,rst-mgr
+      - description: Stratix10 ARM64 SoC
+        items:
+          - const: altr,stratix10-rst-mgr
+          - const: altr,rst-mgr
+
+  reg:
+    maxItems: 1
+
+  altr,modrst-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset of the first modrst register
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - altr,modrst-offset
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    rstmgr@ffd05000 {
+        compatible = "altr,rst-mgr";
+        reg = <0xffd05000 0x1000>;
+        altr,modrst-offset = <0x10>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
deleted file mode 100644
index 43e580ef64ba..000000000000
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic audio memory arbiter controller
-
-The Amlogic Audio ARB is a simple device which enables or
-disables the access of Audio FIFOs to DDR on AXG based SoC.
-
-Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb' or
-	      'amlogic,meson-sm1-audio-arb'
-- reg: physical base address of the controller and length of memory
-       mapped region.
-- clocks: phandle to the fifo peripheral clock provided by the audio
-	  clock controller.
-- #reset-cells: must be 1.
-
-Example on the A113 SoC:
-
-arb: reset-controller@280 {
-	compatible = "amlogic,meson-axg-audio-arb";
-	reg = <0x0 0x280 0x0 0x4>;
-	#reset-cells = <1>;
-	clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
-};
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
new file mode 100644
index 000000000000..704a502adc5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic audio memory arbiter controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description: The Amlogic Audio ARB is a simple device which enables or disables
+  the access of Audio FIFOs to DDR on AXG based SoC.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-axg-audio-arb
+      - amlogic,meson-sm1-audio-arb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      phandle to the fifo peripheral clock provided by the audio clock
+      controller.
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // on the A113 SoC:
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        arb: reset-controller@280 {
+            compatible = "amlogic,meson-axg-audio-arb";
+            reg = <0x0 0x280 0x0 0x4>;
+            #reset-cells = <1>;
+            clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index 92922d3afd14..494a454928ce 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -17,6 +17,7 @@ properties:
       - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
       - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+      - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt
deleted file mode 100644
index 4c56330bf398..000000000000
--- a/Documentation/devicetree/bindings/reset/ath79-reset.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset"
-              as fallback
-- reg: Base address and size of the controllers memory area
-- #reset-cells : Specifies the number of cells needed to encode reset
-                 line, should be 1
-
-Example:
-
-	reset-controller@1806001c {
-		compatible = "qca,ar9132-reset", "qca,ar7100-reset";
-		reg = <0x1806001c 0x4>;
-
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/berlin,reset.txt b/Documentation/devicetree/bindings/reset/berlin,reset.txt
deleted file mode 100644
index 514fee098b4b..000000000000
--- a/Documentation/devicetree/bindings/reset/berlin,reset.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Marvell Berlin reset controller
-===============================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller node must be a sub-node of the chip controller
-node on Berlin SoCs.
-
-Required properties:
-- compatible: should be "marvell,berlin2-reset"
-- #reset-cells: must be set to 2
-
-Example:
-
-chip_rst: reset {
-	compatible = "marvell,berlin2-reset";
-	#reset-cells = <2>;
-};
-
-&usb_phy0 {
-	resets = <&chip_rst 0x104 12>;
-};
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
deleted file mode 100644
index a6f8455ae6c4..000000000000
--- a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Bitmain BM1880 SoC Reset Controller
-===================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:   Should be "bitmain,bm1880-reset"
-- reg:          Offset and length of reset controller space in SCTRL.
-- #reset-cells: Must be 1.
-
-Example:
-
-        rst: reset-controller@c00 {
-                compatible = "bitmain,bm1880-reset";
-                reg = <0xc00 0x8>;
-                #reset-cells = <1>;
-        };
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
new file mode 100644
index 000000000000..f0aca744388c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Bitmain BM1880 SoC Reset Controller
+
+maintainers:
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    const: bitmain,bm1880-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@c00 {
+        compatible = "bitmain,bm1880-reset";
+        reg = <0xc00 0x8>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt
deleted file mode 100644
index c6aef36b7d15..000000000000
--- a/Documentation/devicetree/bindings/reset/lantiq,reset.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Lantiq XWAY SoC RCU reset controller binding
-============================================
-
-This binding describes a reset-controller found on the RCU module on Lantiq
-XWAY SoCs.
-
-This node has to be a sub node of the Lantiq RCU block.
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible		: Should be one of
-				"lantiq,danube-reset"
-				"lantiq,xrx200-reset"
-- reg			: Defines the following sets of registers in the parent
-			  syscon device
-			- Offset of the reset set register
-			- Offset of the reset status register
-- #reset-cells		: Specifies the number of cells needed to encode the
-			  reset line, should be 2.
-			  The first cell takes the reset set bit and the
-			  second cell takes the status bit.
-
--------------------------------------------------------------------------------
-Example for the reset-controllers on the xRX200 SoCs:
-	reset0: reset-controller@10 {
-		compatible = "lantiq,xrx200-reset";
-		reg <0x10 0x04>, <0x14 0x04>;
-
-		#reset-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
new file mode 100644
index 000000000000..15d65a5dd631
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU reset controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  This binding describes a reset-controller found on the RCU module on Lantiq
+  XWAY SoCs. This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+  compatible:
+    enum:
+      - lantiq,danube-reset
+      - lantiq,xrx200-reset
+
+  reg:
+    description: |
+      Defines the following sets of registers in the parent syscon device
+      Offset of the reset set register
+      Offset of the reset status register
+    maxItems: 2
+
+  '#reset-cells':
+    description: |
+      The first cell takes the reset set bit and the second cell takes the
+      status bit.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // On the xRX200 SoCs:
+    reset0: reset-controller@10 {
+        compatible = "lantiq,xrx200-reset";
+        reg = <0x10 0x04>, <0x14 0x04>;
+        #reset-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
new file mode 100644
index 000000000000..d71d0f0a13ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Antoine Tenart <atenart@kernel.org>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell Berlin reset controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+  controller node on Berlin SoCs.
+
+properties:
+  compatible:
+    const: marvell,berlin2-reset
+
+  "#reset-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chip: chip-control@ea0000 {
+        reg = <0xea0000 0x400>;
+
+        chip_rst: reset {
+            compatible = "marvell,berlin2-reset";
+            #reset-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
deleted file mode 100644
index 17b7a6a43a29..000000000000
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Nuvoton NPCM Reset controller
-
-Required properties:
-- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
-- reg : specifies physical base address and size of the register.
-- #reset-cells: must be set to 2
-
-Optional property:
-- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
-  NPCM7xx contain four software reset that represent numbers 1 to 4.
-
-  If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
-
-Example:
-	rstc: rstc@f0801000 {
-		compatible = "nuvoton,npcm750-reset";
-		reg = <0xf0801000 0x70>;
-		#reset-cells = <2>;
-		nuvoton,sw-reset-number = <2>;
-	};
-
-Specifying reset lines connected to IP NPCM7XX modules
-======================================================
-example:
-
-        spi0: spi@..... {
-                ...
-                resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
-                ...
-        };
-
-The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
new file mode 100644
index 000000000000..fa5e4ea6400e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Reset controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,npcm750-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 2
+
+  nuvoton,sw-reset-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    description: |
+      Contains the software reset number to restart the SoC.
+      If not specified, software reset is disabled.
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    rstc: rstc@f0801000 {
+        compatible = "nuvoton,npcm750-reset";
+        reg = <0xf0801000 0x70>;
+        #reset-cells = <2>;
+        nuvoton,sw-reset-number = <2>;
+    };
+
+    // Specifying reset lines connected to IP NPCM7XX modules
+    spi0: spi {
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
new file mode 100644
index 000000000000..9be60e55cd71
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Alban Bedel <albeu@free.fr>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qca,ar9132-reset
+          - qca,ar9331-reset
+      - const: qca,ar7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@1806001c {
+          compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+          reg = <0x1806001c 0x4>;
+          #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
deleted file mode 100644
index 32d8435a41df..000000000000
--- a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for the AXS10x reset controller
-
-This binding describes the ARC AXS10x boards custom IP-block which allows
-to control reset signals of selected peripherals. For example DW GMAC, etc...
-This block is controlled via memory-mapped register (AKA CREG) which
-represents up-to 32 reset lines.
-
-As of today only the following lines are used:
- - DW GMAC - line 5
-
-This binding uses the common reset binding[1].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-
-Required properties:
-- compatible: should be "snps,axs10x-reset".
-- reg: should always contain pair address - length: for creg reset
-  bits register.
-- #reset-cells: from common reset binding; Should always be set to 1.
-
-Example:
-	reset: reset-controller@11220 {
-		compatible = "snps,axs10x-reset";
-		#reset-cells = <1>;
-		reg = <0x11220 0x4>;
-	};
-
-Specifying reset lines connected to IP modules:
-	ethernet@.... {
-		....
-		resets = <&reset 5>;
-		....
-	};
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
new file mode 100644
index 000000000000..a75db3d405af
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXS10x reset controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description: |
+  This binding describes the ARC AXS10x boards custom IP-block which allows
+  to control reset signals of selected peripherals. For example DW GMAC, etc...
+  This block is controlled via memory-mapped register (AKA CREG) which
+  represents up-to 32 reset lines.
+  As of today only the following lines are used:
+   - DW GMAC - line 5
+
+properties:
+  compatible:
+    const: snps,axs10x-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11220 {
+        compatible = "snps,axs10x-reset";
+        #reset-cells = <1>;
+        reg = <0x11220 0x4>;
+    };
+
+    // Specifying reset lines connected to IP modules:
+    ethernet {
+        resets = <&reset 5>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
deleted file mode 100644
index 38fe34fd8b8a..000000000000
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Altera SOCFPGA Reset Manager
-
-Required properties:
-- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10)
-	       "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC
-- reg : Should contain 1 register ranges(address and length)
-- altr,modrst-offset : Should contain the offset of the first modrst register.
-- #reset-cells: 1
-
-Example:
-	 rstmgr@ffd05000 {
-		#reset-cells = <1>;
-		compatible = "altr,rst-mgr";
-		reg = <0xffd05000 0x1000>;
-		altr,modrst-offset = <0x10>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
index bfbd3e9b4186..0a2c13e1e230 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -38,25 +38,49 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names:
-    oneOf:
-      - items:           # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:           # for others
-          - const: link
+  clock-names: true
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:           # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:           # for others
-          - const: link
+  reset-names: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-reset
+              - socionext,uniphier-pro5-usb3-reset
+              - socionext,uniphier-pro4-ahci-reset
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
deleted file mode 100644
index 9ca27761f811..000000000000
--- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
-=============================================================================
-
-This binding describes a reset controller device that is used to enable and
-disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
-the STi family SoC system configuration registers.
-
-The actual action taken when softreset is asserted is hardware dependent.
-However, when asserted it may not be possible to access the hardware's
-registers and after an assert/deassert sequence the hardware's previous state
-may no longer be valid.
-
-Please refer to Documentation/devicetree/bindings/reset/reset.txt
-for common reset controller binding usage.
-
-Required properties:
-- compatible: Should be "st,stih407-picophyreset"
-- #reset-cells: 1, see below
-
-Example:
-
-	picophyreset: picophyreset-controller {
-		compatible = "st,stih407-picophyreset";
-		#reset-cells = <1>;
-	};
-
-Specifying picophyreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the picophyreset device node and an
-index specifying which channel to use, as described in
-Documentation/devicetree/bindings/reset/reset.txt.
-
-Example:
-
-	usb2_picophy0: usbpicophy@0 {
-		resets = <&picophyreset STIH407_PICOPHY0_RESET>;
-	};
-
-Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
deleted file mode 100644
index 92527138bc93..000000000000
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
-=============================================================================
-
-This binding describes a reset controller device that is used to enable and
-disable on-chip peripheral controllers such as USB and SATA, using
-"powerdown" control bits found in the STi family SoC system configuration
-registers. These have been grouped together into a single reset controller
-device for convenience.
-
-The actual action taken when powerdown is asserted is hardware dependent.
-However, when asserted it may not be possible to access the hardware's
-registers and after an assert/deassert sequence the hardware's previous state
-may no longer be valid.
-
-Please refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "st,stih407-powerdown"
-- #reset-cells: 1, see below
-
-example:
-
-	powerdown: powerdown-controller {
-		compatible = "st,stih407-powerdown";
-		#reset-cells = <1>;
-	};
-
-
-Specifying powerdown control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the powerdown device node and an
-index specifying which channel to use, as described in reset.txt
-
-example:
-
-	st_dwc3: dwc3@8f94000 {
-		resets          = <&powerdown STIH407_USB3_POWERDOWN>,
-	};
-
-Macro definitions for the supported reset channels can be found in:
-
-include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
new file mode 100644
index 000000000000..329ae4ae1a10
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+  the STi family SoC system configuration registers.
+
+  The actual action taken when softreset is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-picophyreset
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    picophyreset: picophyreset-controller {
+        compatible = "st,stih407-picophyreset";
+        #reset-cells = <1>;
+    };
+
+    // Specifying picophyreset control of devices
+    usb2_picophy0: usbpicophy {
+        resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
new file mode 100644
index 000000000000..d3790e602659
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@st.com>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip peripheral controllers such as USB and SATA, using
+  "powerdown" control bits found in the STi family SoC system configuration
+  registers. These have been grouped together into a single reset controller
+  device for convenience.
+
+  The actual action taken when powerdown is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-powerdown
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    powerdown: powerdown-controller {
+        compatible = "st,stih407-powerdown";
+        #reset-cells = <1>;
+    };
+
+    // Specifying powerdown control of devices:
+    st_dwc3: dwc3 {
+        resets = <&powerdown STIH407_USB3_POWERDOWN>;
+    };